Printer Parts

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

kr119.20

Bambu Lab A1 Mini Silicone Thermal Socks - Enhance Printing

In stock

Hotend spare parts

Silicone Thermal Insulation Socks for Bambu lab A1 mini

kr23.20

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

Honey Badger Textured Beds | Enhanced Durability

Honey Badger Textured Beds | Enhanced Durability 2

In stock

Build surfaces

Honey Badger Semi-Satin Dual-Sided Textured PEI sheet

Material: Special blend of PEI with added Polycarbonate for superior adhesion Temperature Resistance: High temp capability up to 220°C Versatility: Suitable for all materials and engineering-grade polymers Finish: Coated on both sides, offering a unique semi-satin texture

kr219.00

In stock

Complete hotends

Rapido 2F UHF "Fiber" hotend by Phaetus

Rapido 2 - Revised Version This is a revised version of the Rapido 2, designed to be ready to print abrasive materials like fiberglass or carbon fiber straight out of the box and reliably. It uses an RCC coated all-metal heat break for improved wear resistance. Specs: PT1000 thermistor UHF type hotend New heat block design featuring a larger melt...

kr796.00

LGX CHAMP Adapter - Direct Mount for Chube Conduction

LGX CHAMP Adapter - Direct Mount for Chube Conduction 2

In stock

Hotend spare parts

LGX CHAMP Adapter: Chube Conduction Heatsink

Compatible with Chube Conduction, the LGX CHAMP Adapter provides a direct-mount option for LGX users. Features: Built-in Heatsink for Chube Conduction Qualifies as the extra metal mount required for Chube Conduction Supports 40mm fan for cooling both extruder and hotend! Use: Remove your Chube Conduction's heatsink. There are 3 torx screws...

kr279.20

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer 2

In stock

Hotend spare parts

Chube Air Water Block

Does your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you! Just remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.

kr423.20

Chube Conduction Hotend: Precision High-Flow 3D Printing

Chube Conduction Hotend: Precision High-Flow 3D Printing 2

In stock

Complete hotends

Chube Conduction

The Chube Conduction hotend is built for precision and high-performance printing. Precision Design: 52mm meltzone, weighs 74g Advanced Technology: Includes Chalice Heatbreak for superior performance in extreme conditions Durable and Efficient: Rated for 500°C operation with a stainless steel cooling shield User-Friendly: Compatible with RepRap...

kr2,240.00

-15%

In stock

Hotend

BIQU Panda Revo Hotend for Bambu Labs

The BIQU Panda Revo Hotend is a high-flow, high-speed drop-in upgrade for Bambu Labs P1 Series and X1 Series 3D printers. This hotend offers rapid nozzle swaps, superior thermal performance, and robust construction, significantly improving printing efficiency and quality. 30-second rapid nozzle swap High flow rate of 40 mm³/s Compatible with Bambu...

kr849.32 kr999.20

Honey Badger Dual-Sided Semi-Satin PEI Sheet for Creality K1

Product available with different options

Build surfaces

Honey Badger Dual-Sided Semi-Satin PEI Sheet for Creality K1

Probably the best PEI sheet for 3D printers in existence. This sheet is made from a special blend of PEI with added Polycarbonate for superior adhesion. It offers high temperature resistance up to 220°C and is suitable for all materials and engineering-grade polymers. The sheet is coated on both sides, providing a unique semi-satin texture. Material:...

kr236.00

View

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

In stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

kr303.20

Goliath Heater Block 550°C | 3D Printer Hotend

Goliath Heater Block 550°C | 3D Printer Hotend 2

-32%

In stock

Hotend spare parts

Goliath Heater Block 550°C (Dragon hotend compatible)

kr486.88 kr716.00

High-performance heater block featuring: Max temperature: 550°C Fast heating: 350°C in 55s Power: 24V/100W PT1000 temperature sensor V6 nozzle compatible Compatible with Crazy & Dragon hotends

Mellow TZ 3.0 Hotend | Premium Upgrade for Bambu Lab X1 & P1 Series

Mellow TZ 3.0 Hotend | Premium Upgrade for Bambu Lab X1 & P1 Series 2

In stock

Complete hotends

Mellow TZ 3.0 Premium Hotend with HRC60+ Nozzle for Bambu Lab X1/P1

kr223.20

Advanced hotend for Bambu Lab X1/P1 featuring: Chrome-zirconium copper heatsink for superior heat dissipation HRC60+ hardened steel nozzle with DLC coating Titanium alloy heat break (0.25mm wall) Ra 0.4 internal surface finish Anti-leakage one-piece design Temperature resistance: 550°C SKD11 hardened steel construction

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

In stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

kr199.20

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

DLC Extruder Gear For Creality K1/K1C/K1 Max

In stock

Extruder spare parts

DLC Extruder Gear For Creality K1/K1C/K1 Max

kr127.20

High-precision CNC machined extruder gear with DLC coating, made from premium mold steel with 62-65 HRC hardness. Specifically designed for Creality K1, K1C, and K1 Max.Features razor-sharp extruding teeth for optimal filament grip and enhanced printing quality. Perfect for carbon fiber materials with superior wear and corrosion resistance.

CryoGrip Pro BuildPlate For Bambu Lab Printers - Double-Sided

CryoGrip Pro BuildPlate For Bambu Lab Printers - Double-Sided 2

In stock

Build surfaces

BIQU CryoGrip Pro BuildPlate For Bambu Lab X1/P1/A1/A1 Mini

kr199.20

LDO Orbiter V2.5 - Premium Direct Drive Extruder System

LDO Orbiter V2.5 - Premium Direct Drive Extruder System 2

In stock

Complete extruders

LDO Orbiter V2.5 Direct Drive Extruder

kr396.00

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda Jetpack Cooling Cover for Bambu Lab Printers

Upgrade your Bambu Lab printer with this innovative MJF nylon cooling cover Premium lightweight design with enhanced airflow Specially designed air outlet for optimal nozzle cooling Reduces deformation in overhangs and bridges Crafted from high-quality MJF nylon with excellent temperature...

kr284.00

BIQU Eco Turbo Kit | CPAP Cooling Upgrade for 3D Printer

BIQU Eco Turbo Kit | CPAP Cooling Upgrade for 3D Printer 2

In stock

Fans

BIQU Eco Turbo Kit - CPAP-Grade Cooling for 3D Printers

Upgrade your 3D printer with CPAP-grade cooling at an affordable price! High-performance Nidec brushless turbo fan with dedicated adapter board Plug-and-play installation with pre-crimped connectors Wide compatibility: Supports 5-24V (24V power required) Specially optimized for Voron 2.4 with complete...

kr290.00

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda CNC Extruder Housing for Bambu Lab

Premium lightweight extruder housing in aerospace-grade aluminum - 20% lighter than standard housing! CNC-milled AI6061T6 aluminum with open frame structure Optimized cooling design keeps motor stable during extended prints Premium anodized finish for durability and corrosion protection Drop-in upgrade...

kr284.00

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments 2

In stock

Extruder spare parts

BIQU Panda Claw Hardened Gear Set for Bambu Lab for X1/P1

Premium gear set with RNC nano-coating and hardened steel - designed for demanding filaments! Hardened steel with gold nano-coating for extreme wear resistance Self-lubricating brass spur gear with optimized tooth shape CNC-machined idler arm in AL6061 T6 aluminum Includes MoS2 lubricating grease for silk-smooth extrusion The optimized design...

kr159.00

LGX Lite Pro Adapter | Chube VC4 Toolhead Mount

In stock

Hotend spare parts

LGX Lite Pro Adapter Plate for Chube VC4 Toolhead

Specially designed adapter plate for mounting LGX Lite Pro to your Chube VC4 toolhead. Precision manufactured for perfect fit Specifically designed for the Chube version of VC4 Easy installation and secure mounting Important: This adapter plate is ONLY compatible with the Chube version of VC4 toolhead - not the standard VC4 version.

kr75.00

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

In stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

kr75.00

PTFE Adapter for Bambu / AMS / K1 Series – Silver

PTFE Adapter for Bambu / AMS / K1 Series – Silver 2

In stock

Accessory

Filament Hub PTFE Adapter – Bambu X1 / P1 / A1 / AMS / AD5M / K1 Series

kr15.20

Filament Hub PTFE Adapter – Expansion port for smooth material feeding on Bambu and Creality printers. This lightweight, durable adapter is made of aluminum alloy and plastic, designed for a precise fit with Bambu Lab and K1 series printers. Compatible With: Bambu Lab X1 / P1 / A1 / A1 mini / AMS Creality AD5M / AD5M Pro / K1 Series...

BIQU Nebula Dual Gear Extruder – Smart DIY Hotend Upgrade

BIQU Nebula Dual Gear Extruder – Smart DIY Hotend Upgrade 2

In stock

Complete extruders

BIQU Nebula Dual Gear Extruder – Smart DIY Hotend Upgrade

kr359.20

Experience powerful, reliable extrusion with the BIQU Nebula Dual Gear Extruder — a smart, cost-effective upgrade for your 3D printer. Equipped with RGB status lighting, a built-in filament sensor, and a customizable G-code button, Nebula offers convenient auto-loading, one-click unloading, and clear visual feedback. The dual-gear system delivers over 6...

BigTreeTech Panda Claw Hardened Gear Set – For Bambu Lab A1 / A1 Mini

BigTreeTech Panda Claw Hardened Gear Set – For Bambu Lab A1 / A1 Mini 2

In stock

Extruder spare parts

BigTreeTech Panda Claw Hardened Gear Set – For Bambu Lab A1 / A1 Mini

kr151.20

Upgrade your A1 or A1 Mini with the BigTreeTech Panda Claw Hardened Gear Set, engineered for smoother, more durable filament delivery. Featuring RNC nano-coated hardened steel gears and a lightweight CNC-machined aluminum idler arm, this kit enhances precision, stability, and wear resistance — even when printing abrasive filaments. The five-spoke...

ECAS04 Bowden Collet – Secure Tube Connector for 3D Printers

ECAS04 Bowden Collet – Secure Tube Connector for 3D Printers 2

In stock

Extruder spare parts

ECAS04 Bowden Collet – Secure Tube Connector for 3D Printers

kr5.60

The ECAS04 Bowden Collet provides a strong and reliable connection for your Bowden tube setup. Perfect for 3D printers and custom projects, this collet press-fits easily into 3D-printed or plastic components and ensures a firm, stable hold for consistent filament flow. Compatible with standard 4 mm OD Bowden tubes.

DXC Extruder – Creality K1 / K1 Max / K1C / K1 SE Compatible

DXC Extruder – Creality K1 / K1 Max / K1C / K1 SE Compatible 2

In stock

Complete extruders

DXC Extruder – Creality K1 / K1 Max / K1C / K1 SE Compatible

kr236.00

High-precision DXC extruder designed for Creality K1-series printers. Dual-gear system ensures stable, slip-free extrusion. Durable coated components and smooth feeding for all filament types. Plug-and-play replacement for K1, K1 Max, K1C and K1 SE.

LLL Plus Filament Buffer – Fully Assembled

LLL Plus Filament Buffer – Fully Assembled 2

In stock

Accessory

LLL Plus Filament Buffer – Fully Assembled

kr396.00

Ready-to-use LLL Plus Filament Buffer for stable remote filament feeding. Electric feed/retract buttons for easy handling. Auto-feeding & filament break detection for improved reliability. Quiet motor with silent driver. Pre-installed printed parts included.

LLL Plus Filament Buffer – DIY Kit (No Printed Parts)

LLL Plus Filament Buffer – DIY Kit (No Printed Parts) 2

In stock

Accessory

LLL Plus Filament Buffer – DIY Kit (No Printed Parts)

kr316.00

DIY LLL Plus Filament Buffer kit for remote filament feeding. Includes electronics and mechanics — printed parts not included. Supports auto-feeding and filament break detection. Quiet operation with upgraded silent driver.

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

In stock

Hotend spare parts

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

kr76.00

Replacement PT1000 thermistor for Phaetus Rapido 2 and Rapido 2F hotends. Accurate temperature sensing and easy installation. Official updated Phaetus spare part.

In stock

Extruder spare parts

Bowden Tube Buckle for 6.35mm PTFE tube

198

kr4.00

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr9.60

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34 2

In stock

Extruder spare parts

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

1913

kr9.60

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

In stock

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

1915

kr9.60

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

In stock

Complete hotends

Phaetus Dragon

Experience the power of the Phaetus Dragon Hotend, designed to withstand high temperatures up to 500°, while keeping the heatbreak and incoming filament cool. This versatile hotend's innovative design allows for easy nozzle replacement without touching the heat block. It's the perfect fit for most machines that utilize E3D hotends and heatbreaks....

1039

kr511.20

In stock

Complete hotends

Phaetus Dragonfly BMS

Upgrade your Ender or CR series printer with the Phaetus Dragonfly BMS for a superior printing experience. This model supports temperatures up to 500°C, significantly higher than standard hotends. Key benefits include:Increased Flowrate: The Dragonfly BMS delivers a faster flowrate, enhancing your printer's efficiency.Improved Precision: Benefit from...

1041

kr320.00

In stock

Complete hotends

Phaetus Dragonfly BMO

Upgrade your 3D printing capabilities with the Phaetus Dragonfly BMO, a superior alternative to the standard V6 hotend. This model supports temperatures up to 500°, enabling you to work with a wider range of materials. With its consistent flow rate and improved heatbreak precision, you'll enjoy smoother prints with fewer imperfections. High Temperature...

1042

kr359.20

In stock

Complete hotends

Phaetus Dragon Voron

Experience the power of the Phaetus Dragon Voron, a high-temperature hotend authorized by the Voron Team. Designed to fit seamlessly onto their printhead, this model is capable of handling temperatures up to 500° without any heat creep, thanks to its specially designed heatbreak. Two Heatbreak Options: Choose between the standard flow (SF) and high...

1067

kr591.20

In stock

Hotend spare parts

Dragon ST HeatBreak

1574

kr160.00

Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

In stock

Hotend spare parts

Dragon HF HeatBreak

1575

kr199.20

Dragon High Flow heatbreak for Dragon heatsink. The HF model is comes with ceramic insulation which ensures less heat loss as well as longer melting zone. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatblock

1577

kr176.00

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

kr160.00

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

In stock

Hotend spare parts

Dragonfly BMO Heatsink

1581

kr151.20

Dragonfly BMO heatsink for dragonfly conical heatbreaks. Heatsink is exclusive V6 adapter.

In stock

Hotend spare parts

Dragonfly BMS Heatsink

1582

kr160.00

Dragonfly BMS heatsink with conical heatbreak. Mounting holes fit Ends 2/3/5 and CR-10/20.

In stock

High Flow

Dragon ST/HF Silicone Sock

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature

1483

kr31.20

In stock

Silicon socks

Dragonfly BMS/BMO Silicone Sock

Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas.Powerful Output: Despite its compact size,...

1484

kr31.20

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

kr40.00

In stock

Heater

20mm 50w heater - 1m

17112

kr46.40

In stock

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

In stock

Spare parts for print bed

Glass Hotbed Clip 1stk

33245

kr4.80

In stock

Spare parts for print bed

Glass Hotbed Clip 1 pcs

33246

kr4.80

In stock

Spare parts for print bed

Ends Glass Clip 1stk

33248

kr4.80

In stock

Bed adhesives

DimaFix Spray

6272

kr95.20

Experience the perfect adhesion every time with DimaFix Spray. Engineered for materials that are challenging to adhere, like ABS/ASA, it's an essential tool for 3D printing. Excellent Adhesion: Say goodbye to warping. DimaFix ensures a strong bond between your print and the bed, especially with high-temperature materials and a heatbed over 70C.Easy...

In stock

Bed adhesives

DimaFix Pen

6273

kr87.20

Experience the ultimate convenience in 3D printing with the DimaFix Pen. This gas-free adhesive solution ensures a perfect grip on your print bed every time, eliminating the risk of warping. It's especially recommended for materials that are difficult to adhere, like ABS/ASA. Optimized for use with heatbed and high-temperature materials, performing best...

In stock

Spare parts for print bed

Bed Spring 4 pcs (Hard)

33274

kr27.20

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr7.20

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

In stock

Spare parts for print bed

Glass Clip 1stk

33337

kr4.80

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

In stock

Extruder spare parts

Extruder Spring Extra Hard

20431

kr4.80

Length 20mmThread diameter 1.2mm

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

41487

kr204.00

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 8.0

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

41488

kr204.00

In stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

In stock

Silicon socks

Rapido HF Silicone Sock

14582

kr39.20

Protects and insulates your Rapido heating block and nozzle!

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

4583

kr308.00

View

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

4585

kr287.20

In stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

4591

kr56.00

In stock

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

4598

kr71.20

LDO Orbiter 2 Filament Sensor Kit_2944 2

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

20621

kr119.20

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

4622

kr188.00

In stock

Extruder spare parts

Bondtech Internals Set for Sherpa Mini

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

41630

kr292.00

In stock

Silicon socks

Rapido UHF Silicone Sock

14635

kr39.20

Protects and insulates your Rapido heating block and nozzle!

Remote warehouse 2-3 days

Complete hotends

E3D RapidChange Revo™ Voron

Introducing the E3D RapidChange Revo™ Voron - the ultimate HotEnd for your Voron 3D printer. It's smaller, lighter, and redder than ever before, making it an essential upgrade for your 3D printing needs.This innovative product was designed in partnership with Team Voron, ensuring perfect compatibility and optimal performance. Its standout feature is the...

10655

kr946.20

Remote warehouse 2-3 days

Complete hotends

E3D RapidChange Revo™ Six

Upgrade your 3D printer with the E3D RapidChange Revo™ Six, a perfect drop-in replacement for your E3D V6 HotEnd. This easy-to-install component integrates seamlessly with Prusa MK2/3 printers (always check voltage before ordering).Enjoy the convenience of identical dimensions to the E3D V6 HotEnd, ensuring a hassle-free upgrade.No need for any machine...

10657

kr607.20

E3D RapidChange Revo™ Prusa MK3 Edition_3122

E3D RapidChange Revo™ Prusa MK3 Edition_3122 2

Remote warehouse 2-3 days

Complete hotends

E3D RapidChange Revo™ Prusa MK3 Edition

Introducing the E3D RapidChange Revo™ Prusa MK3 Edition - a revolution in 3D printing. This ultra-lightweight HotEnd, weighing just 30g, is the smallest and lightest we've ever created. It's designed to deliver superior speed performance, whether you're using Bowden or direct drive setups. Designed specifically for use with Revo NozzlesWorks seamlessly...

10659

kr628.00

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

4661

kr175.20

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

Bondtech Shaft Assembly for BMG & Direct Extruders

Bondtech Shaft Assembly for BMG & Direct Extruders 2

In stock

Extruder spare parts

Bondtech Shaft assembly

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

20687

kr12.00

Thumbscrew replacement for Bondtech extruder.

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

2725

kr296.00

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

4727

kr335.20

50-Tooth CNC Hollow POM Gear - Precision & Strength

50-Tooth CNC Hollow POM Gear - Precision & Strength 2

In stock

Extruder spare parts

50 Tooth Pom Gear

41729

kr72.00

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

Vz-Hextrudort Aluminum Extruder Shell - VzBoT by Mellow

Vz-Hextrudort Aluminum Extruder Shell - VzBoT by Mellow 2

In stock

Complete extruders

Vz-Hextrudort From VzBoT By Mellow

22738

kr476.00

Introducing the Vz-Hextrudort from VzBoT by Mellow, a high-precision extruder shell crafted from 6061 aluminum alloy. This lightweight yet robust shell outperforms plastic alternatives, offering superior strength and precision. High Precision: CNC machining guarantees accuracy and consistency in every product.Lightweight & Strong: The 6061 aluminum alloy...

HoneyBadger PEI Textured Sheet - Ultimate 3D Print Adhesion

HoneyBadger PEI Textured Sheet - Ultimate 3D Print Adhesion 2

In stock

Build surfaces

HoneyBadger single Sided black Pei Textured

Experience the tenacity of the HoneyBadger Single Sided Black PEI Textured sheet. Crafted with 0.5mm genuine spring steel, this fine-textured sheet is designed for exceptional performance. The ultra-sticky PEI coating ensures perfect adhesion to your printer bed, providing consistent results every time. 0.5mm Genuine Spring Steel: Built to last,...

33742

kr150.00

Goliath Hotend by Mellow - Elevate 3D Printing

Goliath Hotend by Mellow - Elevate 3D Printing 2

In stock

Complete hotends

Goliath Hotend (AKA LSD) From VzBoT By Mellow

10744

kr1,196.00

Introducing the Goliath Hotend (AKA LSD) by VzBoT from Mellow, the ultimate tool for 3D printing enthusiasts. This innovative hotend boasts a choice of air-cooled or water-cooled aluminum heatsink for optimal performance. Its unique bi-material copper and zirconia heatbreak ensures efficient heat transfer. With ceramic spacers and a nickle-plated copper...

HoneyBadger P-Series PEI Beds for 3D Printing

HoneyBadger P-Series PEI Beds for 3D Printing 2

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds

Experience the ultimate in 3D printing with the HoneyBadger P-Series Smooth Black PEI beds. Crafted from premium Japanese PEI, this printing surface is as smooth as glass, ensuring flawless prints every time. Durable: Features 0.5mm spring steel for superior strength and longevity (0.4mm on Bambu, in line with OEM specifications). High Quality: Made...

33742

kr150.00

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

Bowden Tube Buckle for 4mm PTFE tube

kr4.00

Premium Silicone Sock for VZ Goliath Hotend - Heat Protection

In stock

Silicon socks

Silicone sock for VZ Goliath hotend

kr47.20

VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

In stock

Hotend spare parts

Standoff set for VZ Goliath hotend

kr87.20

VZ Goliath M3 PT1000 Thermistor Set - Precision Hotend Upgrade

In stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20

3DLAC Stick 80ml: Premium 3D Printing Adhesive

3DLAC Stick 80ml: Premium 3D Printing Adhesive 2

In stock

Bed adhesives

3DLAC 80ml Adhesive Stick

kr52.00

Experience the unmatched performance of the 3DLAC Stick, a top-tier adhesive specifically crafted for FFF/FDM 3D printing. This adhesive ensures your 3D printed parts remain firmly in place throughout the printing process, effectively eliminating errors like warping.Key FeaturesSuperior Fixation: Provides an exceptional level of grip, ensuring your 3D...

3DLAC Plus Adhesion Spray for 3D Printing - 100ml

3DLAC Plus Adhesion Spray for 3D Printing - 100ml 2

In stock

Bed adhesives

3DLAC Plus 100ml Adhesion Pump Spray

kr59.20

Experience seamless 3D printing with the 3DLAC Plus 100ml Adhesion Pump Spray. Specially crafted for FFF/FDM 3D printing parts, this adhesive ensures a high level of fixation during the entire printing process, preventing common issues like warping. Key FeaturesSuperior hold: Offers an exceptional level of adhesion, ensuring your 3D printed parts stay in...

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

In stock

Extruder spare parts

OEM IDGA Set

kr119.20

OEM Reverse Set for HextrudORT - Ultimate Feeding System

In stock

Extruder spare parts

OEM Reverse Set for HextrudORT

Original Bondtech OEM set of parts to use on the HextrudORT from the HevORT project. Includes a set with the Hardened Steel R.I.D.G.A. V2 and BMG original 1.75mm secondary Drive Gear. Precision cnc-machined. Sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with...

41486

kr279.20

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today 2

In stock

Extruder spare parts

Galileo 2 – Extruder Kit by LDO

kr391.20

Galileo 2 StandaloneDrop-in replacement of Orbiter 2.0 or Sherpa MiniSTL / Guide: https://github.com/JaredC01/Galileo2 Galileo 2 Stealthburnerdrop-in replacement of the CW2 extruder with Stealthburner toolheadSTL / Guide: https://github.com/JaredC01/Galileo2 Kit Includes: LDO-36STH20-1004AHG(9T) Stepper Motor, 1 piece Ring Gear Housing MFJ, 1...

Rapido2.0 Heateblock: Advanced Heating Solution

In stock

Hotend spare parts

Rapido2.0 Heateblock

kr196.00

Buy Rapido 2.0 Heater Clips for Efficient Heating

In stock

Hotend spare parts

Rapido 2.0 Heater Clips

kr40.00

Rapido 2.0 PT1000 Thermistor - Precision Temperature Control

In stock

Hotend spare parts

Rapido 2.0 PT1000 Thermistor

kr119.20

OEM RIDGA V2 Set: Enhanced 3D Print Quality

OEM RIDGA V2 Set: Enhanced 3D Print Quality 2

In stock

Extruder spare parts

OEM RIDGA (V2) Set

A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Designed for the following Open Source extruders: HextrudORT Sherpa Mini Voron Mini StealthBurner Why a V2? The OEM RIDGA V2 allows for ideal engagement between main gear and an 8T or 10T motor gear, while retaining a safe...

kr119.20

Bondtech CHT Spider Brass Nozzle for 1.75 & 2.85mm Filaments

-30%

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

kr83.44 kr119.20

In stock

Heater

Ceramic Heater X1C

kr31.20

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

In stock

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections.With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications.Experience unparalleled...

XOL Toolhead Rev for Voron Printers - Top Performance

XOL Toolhead Rev for Voron Printers - Top Performance 2

In stock

Hotend spare parts

XOL (newest rev) Toolhead by Armchair Engineering 12k

kr236.00

One of the lightest, highest performing tool heads available for the Voron printer family.Now shipping the newest revision of XOL including bones! Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOM Cube. After finding that...

Honey Badger HighTemp Magnetic Sheets | Durable & Custom

In stock

Spare parts for print bed

Honey Badger HighTemp Magnetic Sheets

Thickness: Total 1.75 mm (magnet + adhesive) High-Temperature Adhesive: Features 3M 468MP glue capable of withstanding up to 204°C short-term and 149°C long-term Enhanced Durability: Offers 35% higher temperature resistance than standard 300LSE adhesive

kr59.00

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab 2

In stock

Frame accessories

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends - Upgrade your 3D printing with the Panda Jet, a cutting-edge cooling fan duct made from high-quality MJF nylon. Designed for the Bambu Lab P1/X1 series and compatible with Panda Flow and Revo series hot ends, this duct features an innovative air path that precisely directs cooling air to...

kr199.20

Thermistor Ceramic Heater for Bambu Lab P1P/P1S

In stock

Heater

Thermistor & Ceramic Heater for Bambu Lab P1P/P1S

kr39.20

This ceramic heater and thermistor module is designed for the Bambu Lab P1P and P1S 3D printers. It combines a 24V 48W heating element with a 100K Ohm NTC 3950 thermistor for accurate temperature control and efficient heating. Heating slice: 24V 48W Thermistor: 100K Ohm NTC 3950 Resistance Accuracy: ±1% Temperature Range: -40℃ to +300℃ Max Rated...

LDO Orbitool O2 USB Tool Head Board - For Orbiter V2, High Protection, USB Communication

LDO Orbitool O2 USB Tool Head Board - For Orbiter V2, High Protection, USB Communication 2

In stock

Mainboards

LDO Orbitool O2 USB Tool Head Board - For Orbiter V2

Optimized Design: Specifically designed for the Orbiter V2, including features like the orbiter sensor, ensuring seamless integration. High Fault Protection: Features active short circuit protection, reverse power supply protection, and EMI/ESD protection on all inputs and outputs. USB Communication: Utilizes a STM32F042 microcontroller running at...

kr351.20

LDO Orbitool O3 USB Tool Head Board - For Smart Orbiter V3, High Protection, USB Communication

LDO Orbitool O3 USB Tool Head Board - For Smart Orbiter V3, High Protection, USB Communication 2

In stock

Mainboards

LDO Orbitool O3 USB Tool Head Board - For Smart Orbiter V3

Optimized Design: Specifically designed for the Smart Orbiter V3, ensuring seamless integration with its shape and features. High Fault Protection: Features active short circuit protection, reverse power supply protection, and EMI/ESD protection on all inputs and outputs. USB Communication: Utilizes a STM32F042 microcontroller running at 48MHz with...

kr351.20

LDO Nitehawk-36 USB Tool Head Kit - Integrated RP2040, TMC2209, Accelerometer

In stock

Mainboards

LDO Nitehawk-36 (NH36) USB Tool Head Kit Rev C

All-in-One Integration: The Nitehawk-36 is a toolboard featuring an RP2040 MCU, TMC2209 stepper driver, ADXL345 accelerometer, and a USB port, all integrated into one compact board based on the 36mm Nema 14 mounting standard. USB-Based Connectivity: Nitehawk-36 simplifies setup with its USB connection method, eliminating the need for complicated...

kr396.00

Mellow LLL Filament Buffer - Automatic Feeding, Break Detection, Print Quality

Mellow LLL Filament Buffer - Automatic Feeding, Break Detection, Print Quality 2

-30%

In stock

Accessory

Mellow LLL Filament Buffer For 3D Printers (Fully Assembled)

kr195.44 kr279.20

Optimized Remote Feeding: The LLL Filament Buffer is designed for remote filament feeding, simplifying the loading and unloading process for 3D printers. Automatic Filament Feeding: The buffer detects when the extruder pulls on the filament and automatically feeds a segment towards the hot end, reducing strain and improving print stability. Filament...

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers 2

In stock

Complete extruders

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

The Jabberwocky Basic Kit delivers a robust, easy-to-maintain toolhead tailored for multi-material printers.Equipped with Bondtech drive gears, a NEMA14 motor, tool-free hinged extruder, and efficient cooling fans, it ensures reliable filament handling and clean swaps.Includes integrated cutter, filament sensor, and status LEDs—an excellent foundation for...

kr439.20

-25%

In stock

Nozzle

E3D RapidChange Revo™ Brass Nozzle 0.6mm

Pre-order – Estimated delivery start November.• Compact high-performance hotend with Dragon-mount (M3) pattern• Compatible with popular toolheads (Stealthburner, Calamity, Xol/A4T, Dragonburner, Anthead, Trinity, Ender-3, Annex K3, Reaper)• ~33 mm melt zone before nozzle / ~38.5 mm after nozzle• Supports V6 nozzles• Includes heater cartridge and PT1000...

4661

kr131.40 kr175.20

Pre-order

Complete hotends

Chube Compact Hotend Pre-order

kr1,079.20

Pre-order

Complete hotends

Pika Hotend For Bambu X/P Series Pre-order

kr679.20

Pre-order – Estimated delivery end of October / start of November. Info video:https://www.youtube.com/watch?v=GurpyuQRyu8• Drop-in hotend for Bambu X / P series• Includes 0.4 mm hardened steel FIN nozzle by default• Supports FIN-standard nozzles for tool-free swaps• Rated to 500 °C, with replaceable titanium heatbreak• Approx. 33 mm supported melt zone...

Smart Orbiter v3.0 Extruder: Revolutionize 3D Printing

Smart Orbiter v3.0 Extruder: Revolutionize 3D Printing 2

Out-of-Stock

Complete extruders

Smart Orbiter v3.0 All-in-One Extruder

Experience the cutting-edge Smart Orbiter v3.0 All-in-One Extruder, a game-changer in 3D printing technology. This lightweight marvel, weighing just 175g, is a collaborative creation with LDO Motors and an upgrade from the successful Orbiter v2.0.Key Features:Pure Plated Copper Heat-Block: With a 72W ceramic heater and Bontech CHT nozzle for unmatched...

kr716.00

View

LGX Lite PRO eXtruder: Precision 3D Printing Solution

LGX Lite PRO eXtruder: Precision 3D Printing Solution 2

Out-of-Stock

Complete extruders

LGX Lite PRO eXtruder

Experience the power of precision with the LGX Lite PRO eXtruder. This innovative product boasts a high torque for exceptional performance, and a V2 style housing build for durability. Its increased resistance to heat ensures longevity, while the micro form factor guarantees a featherweight and small footprint. Enjoy more pre-tension presets for...

kr796.00

View

Water Block for Chube Conduction - Water-Cooled 3D Printing

Out-of-Stock

Hotend spare parts

Chube Conduction Water Block

kr423.20

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

View

Chube Air Hotend: High-Performance, Lightweight 3D Printing

Chube Air Hotend: High-Performance, Lightweight 3D Printing 2

Out-of-Stock

Complete hotends

Chube Air

The Chube Air hotend delivers exceptional high-flow, high-speed, high-temperature printing in a compact and lightweight design. Compact and Lightweight: 42mm meltzone, weighs 69g Advanced Technology: Features Chalice Heatbreak for extreme temperature handling and heat creep prevention Durable and Efficient: Rated for 500°C operation, perfect for...

kr1,836.00

View

Chube Toolplate | Black Anodized for RatRig V-Core 4

Out-of-Stock

Hotend spare parts

Chube Toolplate for RatRig V-Core 4 - Black Anodized

Premium toolplate in 6061 aluminum, specially designed for RatRig V-Core 4 with Chube toolhead setup. Manufactured from high-quality 6061 aluminum Black anodized finish for increased durability Precision manufactured for perfect fit Based on the popular Chube VC4 design This premium toolplate is specifically designed for the Chube toolhead...

kr162.00

View

Out-of-Stock

Hotend spare parts

Dragon Heat Block

1576

kr140.00

View

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

Out-of-Stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr31.20

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort. Compact and...

View

Out-of-Stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

View

Bondtech CHT BiMetal MK8 Nozzle - Enhanced 3D Printing

Bondtech CHT BiMetal MK8 Nozzle - Enhanced 3D Printing 2

Out-of-Stock

Abrasive resistant

Bondtech CHT BiMetal MK8 Coated Nozzle

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your MK8 style heat block by 50% They are manufactured by Bondtech in-house

27726

kr296.00

View

Voron V0 S1 Upgrade Parts: PI Heater & 200W PSU Kit

Voron V0 S1 Upgrade Parts: PI Heater & 200W PSU Kit 2

Out-of-Stock

Spare parts for print bed

Voron V0 S1 Upgrade Parts PI Heater and 200W PSU

Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder : LGX LGX Lite Recommended to feed Engineering grade thermoplastics. To use our LGX extruders above our default recommendations: with thicker mounting plates; at higher environment temperatures; at...

kr556.00

1x Aluminium build plate with PI Heater 1x 200w PSU (Mornsun LMF200-23B24 OSU)

View

LGX Steel Drive Train Upgrade for Bondtech Extruders

LGX Steel Drive Train Upgrade for Bondtech Extruders 2

Out-of-Stock

Extruder spare parts

LGX Steel Drive Train Upgrade Set

kr263.20

View

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

Out-of-Stock

Extruder spare parts

Ballbearing 4x8x3.0

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

View

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

Out-of-Stock

Extruder spare parts

BMG Drive Gears IDGA Kit

kr239.20

View

LDO Revo™ Voron: Elevate Your 3D Printing Game

LDO Revo™ Voron: Elevate Your 3D Printing Game 2

Out-of-Stock

Complete hotends

LDO Revo™ Voron

Introducing the LDO Revo™ Voron, a special edition exclusively offered by LDO Motors.Unleash the power of your Voron 3D printer with this smaller, lighter, and REDDER HotEnd. It's not just a color, it's a statement of superior performance and style.Equipped with 1x 0.4mm and 1x 0.6mm nozzles, this HotEnd is designed for precise and efficient 3D...

10655

kr679.20

View

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle 2

Out-of-Stock

Hotend spare parts

LDO Revo™ HF Hot side Kit - 60w HeaterCore with 0.6 Nozzle

10655

kr599.20

The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd. Includes a 60W heater core and 0.6mm high flow Revo nozzle.

View

Phaetus Rapido Plus v2 (PT1000): 3D Printing Revolution

Phaetus Rapido Plus v2 (PT1000): 3D Printing Revolution 2

Out-of-Stock

Complete hotends

Phaetus Rapido Plus v2 (PT1000)

Experience the power of the Phaetus Rapido Plus v2 (PT1000), an upgraded 3D printing innovation designed for high-speed, high-temperature printing. This state-of-the-art tool features a modular heater, thermistor, and block construction for reduced maintenance costs and enhanced durability.Its new heat block design boasts a larger melt zone, perfect for...

kr716.00

View

LGX Lite V2 Extruder with Motor for 3D Printing

LGX Lite V2 Extruder with Motor for 3D Printing 2

Out-of-Stock

Complete extruders

LGX Lite V2 Large Gears eXtruder with motor

Discover the next level of 3D printing with the LGX Lite V2 Large Gears eXtruder with motor, designed exclusively for 1.75 mm size filament. This high-quality extruder boasts:Tighter tolerances for precise prints every timeAn improved build quality that stands the test of timeA sturdier 2 parts housing design for enhanced durabilityPrecise stepper motor...

kr476.00

View

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

kr183.20

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

Voron v2.4 Build Platform Kit with LDO Heater

Voron v2.4 Build Platform Kit with LDO Heater 2

Out-of-Stock

Build surfaces

Voron v2.4 Build Platform Kit, Featuring LDO Heating System

This product features a high-quality build platform designed for optimal 3D printing performance: The build plate is cast Aluminium and Blanchard ground for a perfectly flat surface. The flex plate is double-sided with PEI coating: one side is smooth for fine details, and the other is textured for easy print removal. It simplifies print removal,...

kr1,516.00

View

Voron Trident Build Platform Kit with LDO Heater

Voron Trident Build Platform Kit with LDO Heater 2

Out-of-Stock

Build surfaces

Voron Trident Build Platform Kit, Featuring LDO Heating System