Bowden Tube Buckle for 6.35mm PTFE tube

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

In stock

kr4.00

Email address

Product Details

Reference 198

16 other products in the same category:

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers 2

In stock

Complete extruders

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO

kr439.20

The Jabberwocky Basic Kit delivers a robust, easy-to-maintain toolhead tailored for multi-material printers.Equipped with Bondtech drive gears, a NEMA14 motor, tool-free hinged extruder, and efficient cooling fans, it ensures reliable filament handling and clean swaps.Includes integrated cutter, filament sensor, and status LEDs—an excellent foundation for...

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr9.60

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

Out-of-Stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

View

OEM Reverse Set for HextrudORT - Ultimate Feeding System

Out-of-Stock

Extruder spare parts

OEM Reverse Set for HextrudORT

Bondtech

41486

kr279.20

Original Bondtech OEM set of parts to use on the HextrudORT from the HevORT project. Includes a set with the Hardened Steel R.I.D.G.A. V2 and BMG original 1.75mm secondary Drive Gear. Precision cnc-machined. Sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with...

View

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

Out-of-Stock

Extruder spare parts

Bondtech Internals Set for Sherpa Mini

Bondtech

41630

kr256.00

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

View

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

In stock

Extruder spare parts

OEM IDGA Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Compatible only with the following extruders: Voron ClockWork 2 (CW2)

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments 2

In stock

Extruder spare parts

BIQU Panda Claw Hardened Gear Set for Bambu Lab for X1/P1

BIQU

kr159.00

Premium gear set with RNC nano-coating and hardened steel - designed for demanding filaments! Hardened steel with gold nano-coating for extreme wear resistance Self-lubricating brass spur gear with optimized tooth shape CNC-machined idler arm in AL6061 T6 aluminum Includes MoS2 lubricating grease for silk-smooth extrusion The optimized design...

Bondtech Shaft Assembly for BMG & Direct Extruders

Bondtech Shaft Assembly for BMG & Direct Extruders 2

In stock

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

In stock

Extruder spare parts

BMG Drive Gears IDGA Kit

kr239.20

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

kr183.20

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

kr119.20

ECAS04 Bowden Collet – Secure Tube Connector for 3D Printers

ECAS04 Bowden Collet – Secure Tube Connector for 3D Printers 2

In stock

Extruder spare parts

ECAS04 Bowden Collet – Secure Tube Connector for 3D Printers

kr5.60

The ECAS04 Bowden Collet provides a strong and reliable connection for your Bowden tube setup. Perfect for 3D printers and custom projects, this collet press-fits easily into 3D-printed or plastic components and ensures a firm, stable hold for consistent filament flow. Compatible with standard 4 mm OD Bowden tubes.

LDO Orbiter 2 Filament Sensor Kit_2944 2

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

kr156.00

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

Customers who bought this product also bought:

Anti-Vibration Foot Hardware Kit for 3D Printers | Precision Upgrade

Anti-Vibration Foot Hardware Kit for 3D Printers | Precision Upgrade 2

In stock

Frame accessories

Omnidirectional Self-Aligning Anti-Vibration Foot Kit for 3D Printers (Hardware Only)

kr47.20

Enhance Your 3D Printing Experience with Superior Vibration Control - Hardware Kit Upgrade your 3D printer's stability with this advanced anti-vibration foot kit. This kit includes hardware components only. Key features include: Hardware kit for self-aligning anti-vibration feet (3D printable parts not included) Designed for fast 3D printers to...

3DO 5050 WWCW SK6812 LED Pack - Bright, Compact Lighting

-20%

In stock

Cameras

3DO 5050 WWCW SK6812 LED (10Pcs.)

kr80.00 kr100.00

We made this tiny 5050 (5mm x 5mm) WWCW LED, doing our nozzle camera project, as we wanted as much light as possible, while still keeping the SK6812 protocol. Single LED: 5mm x 5mm / 0.2" x 0.2" We don't have any more specifics about this particular LED other than it is 6000-6500K color temp and has 3 white LEDs in place of the regular Red/Green/Blue...

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration 2

Out-of-Stock

Other Accessories

Nevermore StealthMax Filter Kit (Hardware Only)

kr556.00

Advanced 3D printer air filtration kit featuring: Raspberry Pi Pico W WiFi module HEPA filter system (2.5 micron filtration) 24V to 12V step-down converter Pre-soldered electronics Plug-and-play installation Compatible with 4mm activated carbon (not included) Print files: github.com/nevermore3d/StealthMax

View

GDSTIME 4010 24v Axial Fan - 29.8dBA 7500RPM_1250

GDSTIME 4010 24v Axial Fan - 29.8dBA 7500RPM_1250 2

In stock

Fans

GDSTIME 4010 24v Axial Fan - 29.8dBA 7500RPM

34191

kr55.20

Experience the perfect blend of power and silence with the GDSTIME 4010 24v Axial Fan. This compact fan, sized at 40x40x10mm, delivers an impressive RPM of 7500, ensuring optimal cooling performance. Despite its power, it maintains a quiet operation with a noise level of only 29.8dBA. High Air Flow: With an air flow of 8.29 CFM, this fan guarantees...

Out-of-Stock

Stepper Drivers

BTT TMC2209 V1.3

BIQU

27158

kr47.20

Unleash the Power of Smooth, Silent Stepping with the BTT TMC2209 V1.3. This stepper motor driver is a game-changer for 3D printers, CNC machines, and other automated equipment. Ultra-Silent Operation: With its advanced TMC2209 chip, it virtually eliminates noise, making your machine whisper-quiet. Superior Precision: It offers microstep interpolation,...

View

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr9.60

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_1764

Out-of-Stock

Lubrication

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

6420

kr47.20

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

View

Customers who bought this product also bought:

Nevermore Carbon Pellets: High-Quality Air Filtration

Nevermore Carbon Pellets: High-Quality Air Filtration 2

Out-of-Stock

Other Accessories

Nevermore Carbon Pellets

6645

kr135.20

Introducing Nevermore Aktivt Kul, the latest high-quality carbon product from the creators of the renowned Nevermore filters. Specially crafted for air filtration, our carbon lasts up to 2x longer than standard carbon pellets, ensuring cleaner, fresher air for longer. It's expertly designed to capture more Volatile Organic Compounds, enhancing your air...

View

BIGTREETECH Octopus Pro V1.0(F429)_1365 2

In stock

Mainboards

BIGTREETECH Octopus Pro V1.0 (F446)

BIQU

25357

kr396.00

Introducing the BIGTREETECH Octopus Pro V1.0 (F446), a cutting-edge 3D printer motherboard packed with powerful features. With an ARM Cortex-M4 series processor and the F446 chip, it supports 8 axes and is fully compatible with RepRap firmware. Size: Compact design with a size of 160x100mm and mounting hole distance of 150x90mm. Power Input: Operates on...

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

LDO 2x2 XH Splicer PCB: Compact & High-Performance

LDO 2x2 XH Splicer PCB: Compact & High-Performance 2

In stock

Electronics

LDO 2x2 XH Splicer PCB

kr9.60

Introducing the LDO 2x2 XH Splicer PCB - a high-quality, reliable solution for your electronic projects. This compact PCB is designed to offer seamless connectivity and superior performance. Highly Compatible: The LDO 2x2 XH Splicer PCB is compatible with a wide range of devices, making it an ideal choice for various applications.Superior Performance:...

In stock

Stepper Motors

NEMA17 Heatsink

35198

kr8.00

Stay Cool with the NEMA17 HeatsinkThe NEMA17 Heatsink is a must-have for your 3D printer or CNC machine. Designed to keep your stepper motor cool, it ensures optimal performance and longevity of your device. Superior Heat Dissipation: Crafted with high-quality aluminum, it effectively pulls heat away from your motor, preventing overheating and ensuring...

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

kr156.00

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

118.29ml Super Lube® Super Clean (NSF A1 Cleaner)_3069

In stock

Lubrication

118.29ml Super Lube® Super Clean (NSF A1 Cleaner)

6652

kr76.00

Cleaner/degreaser - Food safe - NSF A1 Super Lube® Super Kleen Cleaner/Degreaser is a specially formulated, industrial strength, multi-purpose non-solvent solution designed for cleaning dirt, grease, grime and ink on virtually any water safe surface. Super Lube® Super Kleen Cleaner/Degreaser works effortlessly. Use full strength or dilute as required....

Original Gates Belts (GATES-LL-2GT) - Price per meter_767

In stock

Belts

Original Gates Belts (GATES-LL-2GT) - Price per meter

42279

kr75.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.

In stock

Pulleys/Idlers/Gears

Pulley 2GT 20T (Bore/ID 5mm)

42312

kr19.20

Experience the superior performance of our Pulley 2GT 20T with a 5mm bore/ID. This high-quality pulley offers a minimal tolerance of just 0.4um, ensuring you avoid the micro slippage common in cheaper pulleys. High Precision: With a minimal tolerance of 0.4um, enjoy smooth, precise movement every time. Quality Construction: Manufactured using original...

In stock

Tools

Sharp edge spatula

kr31.20

Introducing the Spartel med skarp kant - a must-have tool for all your print removal needs. This indispensable tool is perfect for printers with non-removable beds, providing an easy and effective solution for stuck prints. High-quality Metal Construction: Built to last, this sturdy spatula ensures durability and reliability. Sharp Edge: The sharp edge...

Bowden Tube Buckle for 6.35mm PTFE tube

Notify me when in stock

16 other products in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought: