Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

Replacement PT1000 thermistor for Phaetus Rapido 2 and Rapido 2F hotends.
Accurate temperature sensing and easy installation.
Official updated Phaetus spare part.

In stock

kr76.00

Email address

Product Details

16 other products in the same category:

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

In stock

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

VZ Goliath M3 PT1000 Thermistor Set - Precision Hotend Upgrade

In stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20

LGX Lite Pro Adapter | Chube VC4 Toolhead Mount

In stock

Hotend spare parts

LGX Lite Pro Adapter Plate for Chube VC4 Toolhead

LUKES LABORATORY

kr75.00

Specially designed adapter plate for mounting LGX Lite Pro to your Chube VC4 toolhead. Precision manufactured for perfect fit Specifically designed for the Chube version of VC4 Easy installation and secure mounting Important: This adapter plate is ONLY compatible with the Chube version of VC4 toolhead - not the standard VC4 version.

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

kr160.00

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

In stock

Heater

Ceramic Heater X1C

kr31.20

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

In stock

Heater

20mm 50w heater - 1m

17112

kr46.40

Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas.Powerful Output: Despite its compact size,...

Chube Toolplate | Black Anodized for RatRig V-Core 4

Out-of-Stock

Hotend spare parts

Chube Toolplate for RatRig V-Core 4 - Black Anodized

LUKES LABORATORY

kr162.00

Premium toolplate in 6061 aluminum, specially designed for RatRig V-Core 4 with Chube toolhead setup. Manufactured from high-quality 6061 aluminum Black anodized finish for increased durability Precision manufactured for perfect fit Based on the popular Chube VC4 design This premium toolplate is specifically designed for the Chube toolhead...

View

Water Block for Chube Conduction - Water-Cooled 3D Printing

Out-of-Stock

Hotend spare parts

Chube Conduction Water Block

LUKES LABORATORY

kr423.20

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

View

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

XOL Toolhead Rev for Voron Printers - Top Performance

XOL Toolhead Rev for Voron Printers - Top Performance 2

Out-of-Stock

Hotend spare parts

XOL (newest rev) Toolhead by Armchair Engineering 12k

kr236.00

One of the lightest, highest performing tool heads available for the Voron printer family.Now shipping the newest revision of XOL including bones! Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOM Cube. After finding that...

View

LGX CHAMP Adapter - Direct Mount for Chube Conduction

LGX CHAMP Adapter - Direct Mount for Chube Conduction 2

Out-of-Stock

Hotend spare parts

LGX CHAMP Adapter: Chube Conduction Heatsink

LUKES LABORATORY

kr279.20

Compatible with Chube Conduction, the LGX CHAMP Adapter provides a direct-mount option for LGX users. Features: Built-in Heatsink for Chube Conduction Qualifies as the extra metal mount required for Chube Conduction Supports 40mm fan for cooling both extruder and hotend! Use: Remove your Chube Conduction's heatsink. There are 3 torx screws...

View

In stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

Rapido2.0 Heateblock: Advanced Heating Solution

Out-of-Stock

Hotend spare parts

Rapido2.0 Heateblock

kr196.00

View

In stock

Hotend spare parts

Dragon ST HeatBreak

1574

kr160.00

Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer 2

Out-of-Stock

Hotend spare parts

Chube Air Water Block

LUKES LABORATORY

kr423.20

Does your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you! Just remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.

View

Customers who bought this product also bought:

High-Quality AzureFilm PETG 1Kg for Clear, Vibrant 3D Prints

Out-of-Stock

PETG

AzureFilm PETG Transp. 1Kg

AzureFilm

FG171-0000

kr104.00

Made in EU, high quality PETG, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 220–240°C Heated bed: Recommended 60-80°C Print speed: 50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

View

Out-of-Stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Phaetus

4591

kr56.00

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

View

In stock

High Flow

Dragon ST/HF Silicone Sock

Phaetus

1483

kr31.20

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature

HoneyBadger MGN12H Stainless Rail - Enhanced Performance

HoneyBadger MGN12H Stainless Rail - Enhanced Performance 2

In stock

Linear rails

HoneyBadger Stainless MGN12H Rail

LDO

32404

kr240.00

Experience superior performance with the HoneyBadger Rustfri MGN12H Rail. This rail features MGN12H rails with medium-high custom preload, ensuring smooth operation and enhanced efficiency. The New! Class H Rails provide a consistent and improved out-of-the-box experience, eliminating the need for tedious setup. Pre-lubed with EP2, these rails are ready...

3DO PLA 2.0 Tough White 1KG - Premium 3D Printing Filament

3DO PLA 2.0 Tough White 1KG - Premium 3D Printing Filament 2

Out-of-Stock

PLA

3DO PLA 2.0 Tough 1KG - White

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

View

In stock

Silicon socks

Rapido HF Silicone Sock

Phaetus

14582

kr39.20

Protects and insulates your Rapido heating block and nozzle!

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr39.20

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort. Compact and...

Customers who bought this product also bought:

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr39.20

In stock

High Flow

Dragon ST/HF Silicone Sock

Phaetus

1483

kr31.20

In stock

Silicon socks

Rapido HF Silicone Sock

Phaetus

14582

kr39.20

Protects and insulates your Rapido heating block and nozzle!

Out-of-Stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Phaetus

4591

kr56.00

View

Out-of-Stock

PLA

3DO PLA 2.0 Tough 1KG - White

3DO

50497

kr143.20

View

In stock

Linear rails

HoneyBadger Stainless MGN12H Rail

LDO

32404

kr240.00

Out-of-Stock

PETG

AzureFilm PETG Transp. 1Kg

AzureFilm

FG171-0000

kr104.00

View

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

Notify me when in stock

16 other products in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought: