Dragon ST/HF Silicone Sock

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.
A silicone sock also helps insulate your heatblock, providing a more stable temperature

Colour

Black
Orange

In stock

kr31.20

Email address

Product Details

Brand

Reference 14152

Viewed products

In stock

Heater

Ceramic Heater X1C

kr31.20

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

6 other products in the same category:

back ordre - est. to ship out 4/3

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr103.20

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

View

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Bondtech

kr119.20

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6 Ender-7 CR-10...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

Customers who bought this product also bought:

HoneyBadger 2510 Performance 24V Axial Fan - High-Speed Cooling

HoneyBadger 2510 Performance 24V Axial Fan - High-Speed Cooling 2

Out-of-Stock

Fans

2510 Performance axial fan 24V by HoneyBadger

HoneyBadger

kr55.20

Introducing the HoneyBadger 2510 Performance Axial Fan 24V, part of our renowned P-Series. This high-performance fan is designed with a robust motor and impressive static pressure, making it a perfect fit for modern toolheads. Model: 2510B-12V-20000 Construction: Built with a dual ball bearing design for durability and longevity. Voltage: Operates on...

View

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower 2

In stock

Fans

CPAP Fan Pipe 1.8M Soft for WS7040

34695

kr199.20

Introducing our premium CPAP Fan Pipe 1.8M Soft for WS7040, the perfect companion for your WS7040 blower. This fan pipe is designed with a soft and flexible material that reduces resistance, ensuring smooth and effortless movement.Our unique shell design prevents folding or blockage, providing consistent and uninterrupted airflow. This fan pipe requires a...

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr39.20

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort. Compact and...

5015 Blower Fan by HoneyBadger | 9200 RPM, PWM/Tach Control - Open Beta

Out-of-Stock

Fans

5015 Blower Fan by HoneyBadger - 9200 RPM (4 wires PWM/Tach) Open Beta

HoneyBadger

kr71.20

5015 Blower Fan by HoneyBadger - 9200 RPM (4 wires PWM/Tach) Open Beta - Upgrade your 3D printing setup with the robust HoneyBadger 5015 blower fan. Engineered for superior performance, this fan delivers a potent 9200 RPM, ensuring efficient cooling, even in enclosed spaces. With Class A insulation rated up to 95°C, it thrives in high-temperature...

View

3220M Precision Crimping Tool For Micro Connectors 32-20AWG

3220M Precision Crimping Tool For Micro Connectors 32-20AWG 2

Out-of-Stock

Tools

IWISS 3220M Micro Connector Pin Crimping Tool

kr199.20

Professional micro connector crimping tool with precision EDM-cut jaws for superior crimping quality. Model: IWS-3220M.Key Features:- Wire capacity: 0.03-0.52mm² (32-20 AWG)- Double-layer EDM precision-cut jaws- Parallel crimping design for 30% better tightness- Simultaneous conductor and insulation crimping- Ergonomic TPE handles with ratchet...

View

In stock

Silicon socks

Rapido HF Silicone Sock

Phaetus

14582

kr39.20

Protects and insulates your Rapido heating block and nozzle!

Voron Trident Clicky-Clack Door Kit: Smooth & Removable

In stock

Frame kits

Voron Trident Clicky-Clack Door Kit by LDO

LDO

kr316.00

Clicky-Clack Door Kit, designed by whopping! A better fitting door for Voron Trident printers, inspired by Doc's fridge door mod.The door opens smoothly, and can be easily removed from the hinges simply by lifting up.The latch mechanism actually draws the door closed against the sealing foam when closed, and clicks shut with the help of some magnets. It...

LGX CHAMP Adapter - Direct Mount for Chube Conduction

LGX CHAMP Adapter - Direct Mount for Chube Conduction 2

Out-of-Stock

Hotend spare parts

LGX CHAMP Adapter: Chube Conduction Heatsink

LUKES LABORATORY

kr279.20

Compatible with Chube Conduction, the LGX CHAMP Adapter provides a direct-mount option for LGX users. Features: Built-in Heatsink for Chube Conduction Qualifies as the extra metal mount required for Chube Conduction Supports 40mm fan for cooling both extruder and hotend! Use: Remove your Chube Conduction's heatsink. There are 3 torx screws...

View

Customers who bought this product also bought:

AzureFilm Refill PLA Filament Light Green

AzureFilm Refill PLA Filament Light Green 2

In stock

PLA

AzureFilm Refill PLA Filament Light Green

AzureFilm

FPR171-6019

kr104.00

AzureFilm Refill PLA Filament – Eco-friendly, high-performance filament designed for AzureFilm Master Spool, Bambu Lab spools, and AMS systems. Same trusted quality as PLA Original – now with reduced packaging and an improved filament tail for smoother, more reliable prints. Key Features: Easy to print – ideal for both beginners and experienced users...

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM_2758

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM_2758 2

In stock

Fans

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM

34586

kr111.20

Introducing the SUNON 5015 24v Blower Fan, a compact and powerful solution for your cooling needs. This high-performance fan measures just 50*50*15mm, making it an ideal fit for a variety of applications.Efficient Power: Operating at a DC24V voltage, it uses a maximum of 81mA current and 1.95W power, ensuring energy-efficient performance.High Speed: With...

Out-of-Stock

Stepper Drivers

BTT TMC2209 V1.3

BIQU

27158

kr47.20

Unleash the Power of Smooth, Silent Stepping with the BTT TMC2209 V1.3. This stepper motor driver is a game-changer for 3D printers, CNC machines, and other automated equipment. Ultra-Silent Operation: With its advanced TMC2209 chip, it virtually eliminates noise, making your machine whisper-quiet. Superior Precision: It offers microstep interpolation,...

View

3DO Nozzle Camera Kit V2.5 – Sony 4K for 3D Printers

3DO Nozzle Camera Kit V2.5 – Sony 4K for 3D Printers 2

In stock

Cameras

3DO Nozzle Camera Kit V2.5 – Sony 4K for 3D Printers

3DO

kr476.00

3DO Nozzle Camera Kit V2.5 – Sony 4K for 3D Printers brings detailed close-up views of your prints with improved image processing, 3D denoise, and up to 30 fps at 4K, 60 fps at 1080p, or 90 fps at 720p and below. The new FPC cable is half the width of the V2 version and features high-CRI LEDs for improved color rendering. Choose between 5 cm, 10 cm, and...

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr84.00

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

In stock

Tools

Torque key for nozzle changes

6430

kr191.20

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer. Medfølger 7mm & 8mm socket, der...

GDSTIME 3010 24v Axial Fan - 27.46dBA 12000RPM_1288

GDSTIME 3010 24v Axial Fan - 27.46dBA 12000RPM_1288 2

In stock

Fans

GDSTIME 3010 24v Axial Fan - 27.46dBA 12000RPM

34347

kr60.00

Introducing the GDSTIME 3010 24v Axial Fan - a compact, high-performance cooling solution. This powerful fan operates at a speed of 12000RPM, ensuring optimal airflow of 4.7 CFM to keep your devices cool and efficient. Despite its power, it maintains a low noise level of 27.46dBA, making it ideal for quiet environments. Ball Bearing Design: Ensures...

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770

In stock

Belts

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter

42280

kr79.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. The EPDM version of Gates is made to stand between -45C to 135C, with the standard version going -35C to 80C.In addition, the EPDM version has up to 2x loins live time...

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Anthracite

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

Dragon ST/HF Silicone Sock

Notify me when in stock

Viewed products

6 other products in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought: