Bondtech CHT® Coated Brass Nozzle

Name: Bondtech CHT® Coated Brass Nozzle
Brand: Bondtech
SKU: 4429
Price: 148 DKK
Availability: InStock

1 unit per pack;

Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm;

Optimized for 1.75mm filament;

Compatible with 2.85mm filament.

Requires 6mm wrench

Diameter

In stock

kr148.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Thread: V6 / M6

Brand

Reference 4628

12 other products in the same category:

Nozzle

E3D RapidChange Revo™ Brass Nozzle

E3D

4661

kr175.20

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Out-of-Stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus

kr303.20

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

View

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

In stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Phaetus

4591

kr56.00

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

Remote storage 2-3 days

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

Phaetus

4583

kr308.00

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

In stock

Nozzle

E3D RapidChange Revo™ Brass Nozzle 0.6mm

E3D

4661

kr175.20

ALPHA PCD Nozzle V6 – Polycrystalline Diamond (High Performance)

In stock

Nozzle

ALPHA PCD Nozzle V6 – Polycrystalline Diamond (High Performance)

HoneyBadger

4583

kr511.20

ALPHA PCD Nozzle – Polycrystalline Diamond (V6) – Engineered for extremes. The ALPHA nozzle features an encapsulated polycrystalline diamond (PCD) tip combined with a nickel-plated copper body. This premium construction delivers outstanding performance in thermal conductivity, wear resistance, and flow consistency – ideal for demanding materials and...

In stock

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

Phaetus

4598

kr71.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Bondtech

kr119.20

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

Phaetus

4585

kr287.20

Customers who bought this product also bought:

4010 Axial Fan 24v 7000 RPM - Efficient Cooling by HoneyBadger

In stock

Fans

4010 Axial fan 24v by HoneyBadger - Balance series (7000 RPM)

HoneyBadger

kr71.20

Experience superior cooling performance with the 4010 Axial fan 24v by HoneyBadger - Balance series. Engineered with a robust fan motor, this axial fan delivers a high static pressure, capable of handling any modern toolhead type or electronics with ease. Boasting a remarkable speed of 7,000 RPM +-10%, it ensures rapid heat dissipation for optimal...

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM_2758

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM_2758 2

Out-of-Stock

Fans

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM

34586

kr111.20

Introducing the SUNON 5015 24v Blower Fan, a compact and powerful solution for your cooling needs. This high-performance fan measures just 50*50*15mm, making it an ideal fit for a variety of applications.Efficient Power: Operating at a DC24V voltage, it uses a maximum of 81mA current and 1.95W power, ensuring energy-efficient performance.High Speed: With...

View

Creality K1/K1Max Silicone Insulation Socks - Enhance 3D Printing

In stock

Silicon socks

Silicone Thermal Insulation Socks for Creality K1/K1Max

kr23.20

Enhance your 3D printing experience with our Silicone Thermal Insulation Socks, designed for Creality K1/K1Max. These silicone covers maintain a consistent temperature and can withstand up to 300°C for improved printing efficiency. Perfect fit for ceramic heater blocks. Available in black and red, adding style to your setup. Reduces the risk of burns...

In stock

Pulleys/Idlers/Gears

Pulley 2GT 20T (Bore/ID 8mm)

42314

kr19.20

Experience superior performance with our Pulley 2GT 20T (Bore/ID 8mm). Built with meticulous precision, this pulley offers a minimal tolerance of just 0.4um, effectively eliminating the micro slipping often found in cheaper alternatives.Manufactured using original molds and tools supplied by Gates, this pulley meets all of Gates' rigorous specifications...

Out-of-Stock

Tools

Torque key for nozzle changes

6430

kr191.20

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer. Medfølger 7mm & 8mm socket, der...

View

In stock

Silicon socks

Rapido UHF Silicone Sock

Phaetus

14635

kr39.20

Protects and insulates your Rapido heating block and nozzle!

EBB SB2209 CAN Kit for Voron StealthBurner - Enhance 3D Printing

In stock

CAN BUS Boards

EBB SB2209 CAN V1.0 for Voron StealthBurner

kr279.20

Introducing the EBB SB2209 CAN V1.0 for Voron StealthBurner - your ultimate solution for achieving the highest quality 3D printing. This kit is designed to provide smooth, efficient, and reliable operation of your Voron StealthBurner. EBB SB2209 includes: EBB 2209 CAN x1 - the heart of the system, ensuring accurate, high-speed performance. EBB SB0000...

Honey Badger HighTemp Magnetic Sheets | Durable & Custom

Out-of-Stock

Spare parts for print bed

Honey Badger HighTemp Magnetic Sheets

HoneyBadger

kr59.00

Thickness: Total 1.75 mm (magnet + adhesive) High-Temperature Adhesive: Features 3M 468MP glue capable of withstanding up to 204°C short-term and 149°C long-term Enhanced Durability: Offers 35% higher temperature resistance than standard 300LSE adhesive

View

Customers who bought this product also bought:

VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

In stock

Hotend spare parts

Standoff set for VZ Goliath hotend

kr87.20

Premium Silicone Sock for VZ Goliath Hotend - Heat Protection

In stock

Silicon socks

Silicone sock for VZ Goliath hotend

kr47.20

In stock

Bearings

F8-16M ABEC-5

45389

kr12.80

Experience the exceptional performance of the F8-16M ABEC-5! This high-quality, precision-engineered product is designed to deliver unparalleled speed and smoothness. Perfect for a variety of applications, it's sure to exceed your expectations. Precision-engineered for ultimate performance and durability.Features ABEC-5 rated bearings for superior speed...

Out-of-Stock

Complete hotends

Phaetus Dragonfly BMS

Phaetus

1041

kr320.00

Upgrade your Ender or CR series printer with the Phaetus Dragonfly BMS for a superior printing experience. This model supports temperatures up to 500°C, significantly higher than standard hotends. Key benefits include:Increased Flowrate: The Dragonfly BMS delivers a faster flowrate, enhancing your printer's efficiency.Improved Precision: Benefit from...

View

HoneyBadger MGN9H Rail - High Performance & Durability

HoneyBadger MGN9H Rail - High Performance & Durability 2

In stock

Linear rails

HoneyBadger Stainless MGN9H Rail

HoneyBadger

kr76.00

Introducing the HoneyBadger Stainless MGN9H Rail, designed for superior performance and durability. Equipped with MGN9H rails featuring a medium-high custom preload, our rails deliver enhanced performance right out of the box. The new Class H Rails ensure a consistent and seamless experience. These rails come pre-lubed with EP2 for smooth and tight...

LDO Nitehawk-36 USB Tool Head Kit - Integrated RP2040, TMC2209, Accelerometer

In stock

Mainboards

LDO Nitehawk-36 (NH36) USB Tool Head Kit Rev C

LDO

kr396.00

All-in-One Integration: The Nitehawk-36 is a toolboard featuring an RP2040 MCU, TMC2209 stepper driver, ADXL345 accelerometer, and a USB port, all integrated into one compact board based on the 36mm Nema 14 mounting standard. USB-Based Connectivity: Nitehawk-36 simplifies setup with its USB connection method, eliminating the need for complicated...

HoneyBadger 5015 Blower Fan 6400RPM PWM - High-Speed Cooling

HoneyBadger 5015 Blower Fan 6400RPM PWM - High-Speed Cooling 2

In stock

Fans

5015 blower fan by HoneyBadger - 6400 RPM (PWM version)

HoneyBadger

kr71.20

Introducing the robust HoneyBadger P-Series 5015 Blower Fan, expertly engineered for your printer's cooling needs. With its Class A insulation, this workhorse can withstand temperatures up to 95°C, making it perfect for enclosed environments. This PWM version fan features a dual ball bearing construction for enhanced durability and a powerful speed of...

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

Bambu A1 mini Silicone Nozzle Brush | 3D Printer Cleaning Tool

In stock

Other Accessories

Silicone Nozzle Brush for Bambu A1 Mini (3pcs)

kr23.20

Gentle nozzle cleaning brushes featuring: Soft silicone construction - won't scratch nozzles Easy to clean and maintain Highly reusable design Compatible with Bambu A1 Mini 3 pieces per pack

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.