Rapido 2.0 Heater Clips

In stock

kr40.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr31.20

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort. Compact and...

Out-of-Stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

View

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

kr160.00

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

Chube Toolplate | Black Anodized for RatRig V-Core 4

In stock

Hotend spare parts

Chube Toolplate for RatRig V-Core 4 - Black Anodized

LUKES LABORATORY

kr162.00

Premium toolplate in 6061 aluminum, specially designed for RatRig V-Core 4 with Chube toolhead setup. Manufactured from high-quality 6061 aluminum Black anodized finish for increased durability Precision manufactured for perfect fit Based on the popular Chube VC4 design This premium toolplate is specifically designed for the Chube toolhead...

Water Block for Chube Conduction - Water-Cooled 3D Printing

In stock

Hotend spare parts

Chube Conduction Water Block

LUKES LABORATORY

kr423.20

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

In stock

Hotend spare parts

Dragon HF HeatBreak

1575

kr199.20

Dragon High Flow heatbreak for Dragon heatsink. The HF model is comes with ceramic insulation which ensures less heat loss as well as longer melting zone. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

In stock

Hotend spare parts

Standoff set for VZ Goliath hotend

kr87.20

BIQU Eco Turbo Kit | CPAP Cooling Upgrade for 3D Printer

BIQU Eco Turbo Kit | CPAP Cooling Upgrade for 3D Printer 2

In stock

Fans

BIQU Eco Turbo Kit - CPAP-Grade Cooling for 3D Printers

BIQU

kr290.00

Upgrade your 3D printer with CPAP-grade cooling at an affordable price! High-performance Nidec brushless turbo fan with dedicated adapter board Plug-and-play installation with pre-crimped connectors Wide compatibility: Supports 5-24V (24V power required) Specially optimized for Voron 2.4 with complete...

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle 2

Out-of-Stock

Hotend spare parts

LDO Revo™ HF Hot side Kit - 60w HeaterCore with 0.6 Nozzle

LDO

10655

kr599.20

The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd. Includes a 60W heater core and 0.6mm high flow Revo nozzle.

View

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

In stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

LUKES LABORATORY

kr75.00

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

Rapido 2.0 PT1000 Thermistor - Precision Temperature Control

In stock

Hotend spare parts

Rapido 2.0 PT1000 Thermistor

kr119.20

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

XOL Toolhead Rev for Voron Printers - Top Performance

XOL Toolhead Rev for Voron Printers - Top Performance 2

In stock

Hotend spare parts

XOL (newest rev) Toolhead by Armchair Engineering 12k

kr236.00

One of the lightest, highest performing tool heads available for the Voron printer family.Now shipping the newest revision of XOL including bones! Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOM Cube. After finding that...

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

In stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

kr199.20

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab 2

In stock

Frame accessories

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends

BIQU

kr199.20

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends - Upgrade your 3D printing with the Panda Jet, a cutting-edge cooling fan duct made from high-quality MJF nylon. Designed for the Bambu Lab P1/X1 series and compatible with Panda Flow and Revo series hot ends, this duct features an innovative air path that precisely directs cooling air to...

Customers who bought this product also bought:

HoneyBadger P-Series PEI Beds for 3D Printing

HoneyBadger P-Series PEI Beds for 3D Printing 2

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds

HoneyBadger

33742

kr150.00

Experience the ultimate in 3D printing with the HoneyBadger P-Series Smooth Black PEI beds. Crafted from premium Japanese PEI, this printing surface is as smooth as glass, ensuring flawless prints every time. Durable: Features 0.5mm spring steel for superior strength and longevity (0.4mm on Bambu, in line with OEM specifications). High Quality: Made...

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

Phaetus

4583

kr308.00

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM_3182

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM_3182 2

In stock

Fans

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM

34667

kr71.20

Experience superior cooling with the GDSTIME 4010 24v Blower Fan. This high-performance fan boasts a 9500 RPM speed and an impressive 3.62 CFM air flow, ensuring optimal temperature control for your devices. Despite its power, it maintains a low noise level of 35dBA, providing quiet operation. Ball Bearing: For smooth and reliable performance.Air...

Out-of-Stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

View

High Wattage Cartridge Heaters - 24v & 48v

In stock

Heater

High Wattage Cartridge Heaters - 24v & 48v

LUKES LABORATORY

kr127.20

Cartridge Heaters Sizes: 6mm Diameter, 20mm and 47mm length Wattage: 50, 80, 100, 120, 140w Voltages: 24, 48V Casing: Rated for 550c Continuous Usage, Wires rated for up to 300c Chamber. Gauge: 18ga Wire Length: 150mm

In stock

Hotend spare parts

Rapido 2.0 PT1000 Thermistor

kr119.20

Chube Conduction Hotend: Precision High-Flow 3D Printing

Chube Conduction Hotend: Precision High-Flow 3D Printing 2

In stock

Complete hotends

Chube Conduction

LUKES LABORATORY

kr2,240.00

The Chube Conduction hotend is built for precision and high-performance printing. Precision Design: 52mm meltzone, weighs 74g Advanced Technology: Includes Chalice Heatbreak for superior performance in extreme conditions Durable and Efficient: Rated for 500°C operation with a stainless steel cooling shield User-Friendly: Compatible with RepRap...

HoneyBadger 3010 24V Axial Fan - High-Performance Cooling

Out-of-Stock

Fans

3010 Performance axial fan 24v by HoneyBadger

HoneyBadger

kr55.20

Introducing the HoneyBadger 3010 Performance Axial Fan 24V, a part of the esteemed P-Series. Engineered with a robust motor and high static pressure, it is perfect for modern toolheads of all types. This fan is designed to deliver optimal performance consistently.Model: 3010B-24V-13800Construction: Built with a dual ball bearing for durability and...

View

Customers who bought this product also bought:

In stock

Complete hotends

Chube Conduction

LUKES LABORATORY

kr2,240.00

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds

HoneyBadger

33742

kr150.00

Out-of-Stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

View

LGX Lite PRO eXtruder: Precision 3D Printing Solution

LGX Lite PRO eXtruder: Precision 3D Printing Solution 2

Out-of-Stock

Complete extruders

LGX Lite PRO eXtruder

Bondtech

kr796.00

Experience the power of precision with the LGX Lite PRO eXtruder. This innovative product boasts a high torque for exceptional performance, and a V2 style housing build for durability. Its increased resistance to heat ensures longevity, while the micro form factor guarantees a featherweight and small footprint. Enjoy more pre-tension presets for...

View

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Out-of-Stock

Fans

3010 Performance axial fan 24v by HoneyBadger

HoneyBadger

kr55.20

View

In stock

Fans

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM

34667

kr71.20

In stock

Hotend spare parts

Rapido 2.0 PT1000 Thermistor

kr119.20

In stock

Heater

High Wattage Cartridge Heaters - 24v & 48v

LUKES LABORATORY

kr127.20

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

Phaetus

4583

kr308.00

View