Dragon ST/HF Silicone Sock

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.
A silicone sock also helps insulate your heatblock, providing a more stable temperature

Colour

Black
Orange

In stock

kr31.20

Email address

Product Details

Brand

Reference 14151

6 other products in the same category:

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Bondtech

kr119.20

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6 Ender-7 CR-10...

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr103.20

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Customers who bought this product also bought:

GDSTIME 4010 12v Axial Fan - 39dBA 15000RPM_1270

GDSTIME 4010 12v Axial Fan - 39dBA 15000RPM_1270 2

In stock

Fans

GDSTIME 4010 12v Axial Fan - 39dBA 15000RPM

34190

kr55.20

Experience the power of the GDSTIME 4010 12v Axial Fan - a compact yet powerful cooling solution. With an impressive RPM of 15000, this fan delivers a robust airflow of 14.16 CFM, ensuring your devices stay cool under intense operations. Despite its high performance, it maintains a low noise level of just 39dBA, providing a quiet cooling solution for your...

-35%

In stock

Heater

20mm 50w heater - 1m

17112

kr25.48 kr39.20

Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas. Powerful Output: Despite its compact size,...

Nevermore Carbon Pellets: High-Quality Air Filtration

Nevermore Carbon Pellets: High-Quality Air Filtration 2

In stock

Other Accessories

Nevermore Carbon Pellets

6645

kr135.20

Introducing Nevermore Aktivt Kul, the latest high-quality carbon product from the creators of the renowned Nevermore filters. Specially crafted for air filtration, our carbon lasts up to 2x longer than standard carbon pellets, ensuring cleaner, fresher air for longer. It's expertly designed to capture more Volatile Organic Compounds, enhancing your air...

NEMA17 SUPER POWER S80 Stepper Motor for Precision Control

NEMA17 SUPER POWER S80 Stepper Motor for Precision Control 2

In stock

Stepper Motors

NEMA17 SUPER POWER (42STH48-2804AH) S80

LDO

35332

kr247.20

Introducing the NEMA17 SUPER POWER (42STH48-2804AH) S80 - a top-tier stepper motor designed for superior performance and reliability. This powerhouse guarantees exceptional precision and control, making it ideal for a wide range of applications.High Torque: The NEMA17 SUPER POWER delivers an impressive torque output, ensuring optimal performance even in...

In stock

Tools

Sharp edge spatula

kr31.20

Introducing the Spartel med skarp kant - a must-have tool for all your print removal needs. This indispensable tool is perfect for printers with non-removable beds, providing an easy and effective solution for stuck prints. High-quality Metal Construction: Built to last, this sturdy spatula ensures durability and reliability. Sharp Edge: The sharp edge...

3DO PLA 2.0 Tough 1KG: Superior, Fast Printing PLA

3DO PLA 2.0 Tough 1KG: Superior, Fast Printing PLA 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Black

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

In stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

Threadlocker Low Strength 10ml - Secure Metal Threads Easily

Out-of-Stock

Other Accessories

Threadlocker low strength 10ml

kr47.20

Threadlocker / adhesive for securing metal threaded connections with low strength bonding. Binding in contact with metal surfaces in the absence of air. low strength initial binding up to 15 minutes full strength: steel – after 6 hours, stainless steel – after 24 hours, brass – after 1 hour temperature resistance from -55°C to +150°C

View

Customers who bought this product also bought:

Out-of-Stock

Magnets

N52 Neodym Magnet 6x3mm - 50pcs black

kr119.20

Discover the power of our N52 Neodymium Magnets 6x3mm - 50pcs set. These super-strong magnets are perfect for a variety of applications, from DIY projects to professional use. High-Quality Material: Made from N52 grade neodymium, the strongest magnetic material available.Perfect Size: With a 6x3mm size, these magnets are small enough for precision work,...

View

Klicky PCB Kit: Precision 3D Printing Probe Package

Klicky PCB Kit: Precision 3D Printing Probe Package 2

Out-of-Stock

Probes

Klicky PCB Kit

kr119.20

Everything thats great about the Klicky probe now in an awesome PCB package for even more precision. Print parts link：https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky

View

Optical Endstop Switch (50cm/3 Pin)_832 2

In stock

Endstops / switches

Optical Endstop Switch (50cm/3 Pin)

38205

kr11.20

Optical Endstop Switch (50cm/3 Pin) is a crucial component for your 3D printer, CNC machine, or other automated devices. This high-quality switch ensures precise and accurate positioning, optimizing your device's performance. Superior Accuracy: Uses light interruption to detect the end position, offering superior accuracy over mechanical switches.Durable:...

Out-of-Stock

Complete hotends

Phaetus Dragon

Phaetus

1039

kr511.20

Experience the power of the Phaetus Dragon Hotend, designed to withstand high temperatures up to 500°, while keeping the heatbreak and incoming filament cool. This versatile hotend's innovative design allows for easy nozzle replacement without touching the heat block. It's the perfect fit for most machines that utilize E3D hotends and heatbreaks....

View

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770

In stock

Belts

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter

42280

kr79.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. The EPDM version of Gates is made to stand between -45C to 135C, with the standard version going -35C to 80C.In addition, the EPDM version has up to 2x loins live time...

AzureFilm Refill Silk PLA Filament 24k Gold

AzureFilm Refill Silk PLA Filament 24k Gold 2

Out-of-Stock

PLA

AzureFilm Refill Silk PLA Filament 24k Gold

AzureFilm

FLR171-1037

kr128.00

AzureFilm Refill PLA Filament – Eco-friendly, high-performance filament designed for AzureFilm Master Spool, Bambu Lab spools, and AMS systems. Same trusted quality as PLA Original – now with reduced packaging and an improved filament tail for smoother, more reliable prints. Key Features: Easy to print – ideal for both beginners and experienced users...

View

In stock

Spare parts for print bed

Glass Clip 1stk

33337

kr4.80

B-stock PLA 1KG – Affordable 3D Print Filament

In stock

B-stock

(B-stock) ASA – Random Colors 1.75mm

kr72.00

Åben for bland self lørdag 16/8 kl. 10.00-12.00Se mere på facebook https://www.facebook.com/events/1559644365565252/ B‑stock ASA – fully printable, just not quite A‑class Our B‑stock ASA is 100 % usable filament that simply doesn’t meet the strict tolerances we require for our A‑class products. Possible minor imperfections Incorrect color or slight shade...

Out-of-Stock

Linear rails

LDO Stainless MGN12H Rail Z1 Preload

LDO

32404

kr263.20

Introducing the LDO Rustfri MGN12H Rail Z1 Preload, a high-quality linear rail renowned for its smooth and consistent operation. Made by LDO, a well-known brand in the industry, this product stands out for its superior performance and durability. Unlike cheaper alternatives, this rail ensures a noise-free operation, eliminating the dreaded crunching...

View

External Soldering Iron Tip Kit for Heat Inserts | Advanced 3D Tools

In stock

Tools

External Universal Soldering Iron Heat Insert Tip Kit

kr60.00

External Universal Soldering Iron Heat Insert Tip Kit - Elevate your soldering efficiency with this versatile tool, compatible with standard 936 soldering iron tips. Designed for sizes M2 to M8, this kit facilitates the embedding of hot-melt copper nuts and inserts in plastics and 3D printed components. Interchangeable with standard 936 general-purpose...

Dragon ST/HF Silicone Sock

Notify me when in stock

6 other products in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought: