Rapido2.0 Heateblock

In stock

kr196.00

Email address

Product Details

16 other products in the same category:

Goliath Heater Block 550°C | 3D Printer Hotend

Goliath Heater Block 550°C | 3D Printer Hotend 2

Out-of-Stock

Hotend spare parts

Goliath Heater Block 550°C (Dragon hotend compatible)

kr716.00

High-performance heater block featuring: Max temperature: 550°C Fast heating: 350°C in 55s Power: 24V/100W V6 nozzle compatible Compatible with Crazy & Dragon hotends

View

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

Out-of-Stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

View

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

Out-of-Stock

Hotend spare parts

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

kr76.00

Replacement PT1000 thermistor for Phaetus Rapido 2 and Rapido 2F hotends. Accurate temperature sensing and easy installation. Official updated Phaetus spare part.

View

In stock

Heater

Ceramic Heater X1C

kr31.20

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

-25%

In stock

Hotend spare parts

Dragonfly BMS Heatsink

1582

kr120.00 kr160.00

Dragonfly BMS heatsink with conical heatbreak. Mounting holes fit Ends 2/3/5 and CR-10/20.

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer 2

Out-of-Stock

Hotend spare parts

Chube Air Water Block

LUKES LABORATORY

kr423.20

Does your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you! Just remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.

View

Water Block for Chube Conduction - Water-Cooled 3D Printing

Out-of-Stock

Hotend spare parts

Chube Conduction Water Block

LUKES LABORATORY

kr423.20

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

View

-20%

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatblock

1577

kr140.80 kr176.00

VZ Goliath M3 PT1000 Thermistor Set - Precision Hotend Upgrade

In stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

-35%

In stock

Heater

20mm 50w heater - 1m

17112

kr25.48 kr39.20

Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas. Powerful Output: Despite its compact size,...

In stock

Hotend spare parts

Dragonfly BMO Heatsink

1581

kr151.20

Dragonfly BMO heatsink for dragonfly conical heatbreaks. Heatsink is exclusive V6 adapter.

In stock

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

In stock

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections. With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications. Experience...

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle 2

Remote warehouse 2-3 days

Hotend spare parts

LDO Revo™ HF Hot side Kit - 60w HeaterCore with 0.6 Nozzle

LDO

10655

kr599.20

The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd. Includes a 60W heater core and 0.6mm high flow Revo nozzle.

View

Customers who bought this product also bought:

BTT EBB 42 CAN V1.2 Board - Maximize Your Tech Projects

BTT EBB 42 CAN V1.2 Board - Maximize Your Tech Projects 2

In stock

CAN BUS Boards

BTT EBB 42 CAN V1.2 with max31865

BIQU

25641

kr199.20

Introducing the BTT EBB 42 CAN V1.2 with max31865 - a compact and powerful device designed to revolutionize your tech projects. This product boasts a 40mmx40mm external dimension and is powered by an ARM Cortex-M0 STM32F072C8T6 48MHz microprocessor for swift operations. It supports an input voltage of DC12V-DC24V 9A and a logic voltage of DC 3.3V. With an...

In stock

High Flow

Dragon ST/HF Silicone Sock

Phaetus

1483

kr31.20

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing 2

Out-of-Stock

Helper Boards

BTT Smart Filament Sensor SFS V2.0

25156

kr127.20

Introducing the BTT Smart Filament Sensor SFS V2.0, an innovative solution for your 3D printing needs. This advanced sensor ensures optimal performance by accurately monitoring filament consumption in real-time. Smart Detection: The sensor can detect filament breakage, run-out, and even blockage for a seamless 3D printing experience. High Compatibility:...

View

Out-of-Stock

Tools

Torque key for nozzle changes

6430

kr191.20

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer. Medfølger 7mm & 8mm socket, der...

View

Complete hotends

E3D RapidChange Revo™ Voron

E3D

10655

kr946.20

Introducing the E3D RapidChange Revo™ Voron - the ultimate HotEnd for your Voron 3D printer. It's smaller, lighter, and redder than ever before, making it an essential upgrade for your 3D printing needs. This innovative product was designed in partnership with Team Voron, ensuring perfect compatibility and optimal performance. Its standout feature is the...

Rapido 2.0 PT1000 Thermistor - Precision Temperature Control

Out-of-Stock

Hotend spare parts

Rapido 2.0 PT1000 Thermistor

kr119.20

View

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

637

kr15.20

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...

Customers who bought this product also bought:

Out-of-Stock

Helper Boards

BTT Smart Filament Sensor SFS V2.0

25156

kr127.20

View

LDO Voron Leviathan V1.2: Elevate Your 3D Printing

In stock

Mainboards

LDO Voron Leviathan

LDO

kr679.20

Discover the next generation of 3D printing with the LDO Voron Leviathan V1.2. This innovative controller board, a joint creation from JNP and LDO, is designed exclusively to elevate the performance of Voron 3D printers. Experience superior precision and unmatched control with its advanced features. Enjoy effortless installation and seamless...

PG7 Cable Gland with Strain Relief - Protect Your Cables

PG7 Cable Gland with Strain Relief - Protect Your Cables 2

In stock

Electronics

PG7 Cable gland with strain relief - 1pcs

kr12.00

Secure your cables efficiently with our PG7 Kabelforskruning med trækaflastning - 1stk. This high-quality cable gland is designed to provide superior strain relief, ensuring your cables remain intact and functional. Durable: Made from robust materials, it guarantees long-lasting performance.Easy Installation: Its simple design allows for effortless setup...

Out-of-Stock

Tools

Torque key for nozzle changes

6430

kr191.20

View

4010 Blower P-Series 12K RPM Fan by HoneyBadger

4010 Blower P-Series 12K RPM Fan by HoneyBadger 2

Out-of-Stock

Fans

4010 blower P-Series fan by HoneyBadger - 12K RPM

HoneyBadger

kr60.00

Experience power and performance with the 4010 Blower P-Series Fan by HoneyBadger - 12K RPM. This high-speed fan operates at an impressive 12,000 RPM ±10%, pushing the boundaries of what this motor size can handle. Powered by 24vdc, it's designed to deliver superb cooling efficiency. High-Speed Performance: With a speed of up to 12K RPM, it's at the...

View

Out-of-Stock

Hotend spare parts

Rapido 2.0 PT1000 Thermistor

kr119.20

View

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

HoneyBadger P-Series PEI Beds for 3D Printing

HoneyBadger P-Series PEI Beds for 3D Printing 2

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds

HoneyBadger

33742

kr150.00

Experience the ultimate in 3D printing with the HoneyBadger P-Series Smooth Black PEI beds. Crafted from premium Japanese PEI, this printing surface is as smooth as glass, ensuring flawless prints every time. Durable: Features 0.5mm spring steel for superior strength and longevity (0.4mm on Bambu, in line with OEM specifications). High Quality: Made...

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr103.20

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980 2

In stock

Fans

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM

34188

kr55.20

Meet the GDSTIME 2510 24v Axial Fan - a high-performance cooling solution with a noise level of just 27.46dBA. Despite its compact size of 25x25x10mm, this fan boasts a whopping 12000RPM, ensuring optimal ventilation for your devices. Ball Bearing: Ensures smooth, frictionless operation.High RPM: With a speed of 12000RPM, it delivers superior cooling...

Rapido2.0 Heateblock

Notify me when in stock

16 other products in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought: