Rapido 2.0 PT1000 Thermistor

In stock

kr119.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

VZ Goliath M3 PT1000 Thermistor Set - Precision Hotend Upgrade

In stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer 2

Out-of-Stock

Hotend spare parts

Chube Air Water Block

LUKES LABORATORY

kr423.20

Does your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you! Just remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.

View

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatblock

1577

kr176.00

VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

In stock

Hotend spare parts

Standoff set for VZ Goliath hotend

kr87.20

Water Block for Chube Conduction - Water-Cooled 3D Printing

Out-of-Stock

Hotend spare parts

Chube Conduction Water Block

LUKES LABORATORY

kr423.20

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

View

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab 2

In stock

Frame accessories

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends

BIQU

kr199.20

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends - Upgrade your 3D printing with the Panda Jet, a cutting-edge cooling fan duct made from high-quality MJF nylon. Designed for the Bambu Lab P1/X1 series and compatible with Panda Flow and Revo series hot ends, this duct features an innovative air path that precisely directs cooling air to...

In stock

Hotend spare parts

Dragon ST HeatBreak

1574

kr160.00

Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

In stock

Hotend spare parts

Dragonfly BMS Heatsink

1582

kr160.00

Dragonfly BMS heatsink with conical heatbreak. Mounting holes fit Ends 2/3/5 and CR-10/20.

Rapido2.0 Heateblock: Advanced Heating Solution

Out-of-Stock

Hotend spare parts

Rapido2.0 Heateblock

kr196.00

View

In stock

Heater

Ceramic Heater X1C

kr31.20

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

Bambu Lab A1 Mini Silicone Thermal Socks - Enhance Printing

In stock

Hotend spare parts

Silicone Thermal Insulation Socks for Bambu lab A1 mini

kr23.20

Thermistor Ceramic Heater for Bambu Lab P1P/P1S

In stock

Heater

Thermistor & Ceramic Heater for Bambu Lab P1P/P1S

kr39.20

This ceramic heater and thermistor module is designed for the Bambu Lab P1P and P1S 3D printers. It combines a 24V 48W heating element with a 100K Ohm NTC 3950 thermistor for accurate temperature control and efficient heating. Heating slice: 24V 48W Thermistor: 100K Ohm NTC 3950 Resistance Accuracy: ±1% Temperature Range: -40℃ to +300℃ Max Rated...

In stock

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

Customers who bought this product also bought:

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing 2

In stock

Helper Boards

BTT Smart Filament Sensor SFS V2.0

25156

kr175.20

Introducing the BTT Smart Filament Sensor SFS V2.0, an innovative solution for your 3D printing needs. This advanced sensor ensures optimal performance by accurately monitoring filament consumption in real-time. Smart Detection: The sensor can detect filament breakage, run-out, and even blockage for a seamless 3D printing experience.High Compatibility: It...

In stock

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections.With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications.Experience unparalleled...

BIGTREETECH Octopus Pro V1.0(F429)_1365 2

In stock

Mainboards

BIGTREETECH Octopus Pro V1.0 (F446)

BIQU

25357

kr396.00

Introducing the BIGTREETECH Octopus Pro V1.0 (F446), a cutting-edge 3D printer motherboard packed with powerful features. With an ARM Cortex-M4 series processor and the F446 chip, it supports 8 axes and is fully compatible with RepRap firmware.Size: Compact design with a size of 160x100mm and mounting hole distance of 150x90mm.Power Input: Operates on a...

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM_3182

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM_3182 2

In stock

Fans

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM

34667

kr71.20

Experience superior cooling with the GDSTIME 4010 24v Blower Fan. This high-performance fan boasts a 9500 RPM speed and an impressive 3.62 CFM air flow, ensuring optimal temperature control for your devices. Despite its power, it maintains a low noise level of 35dBA, providing quiet operation. Ball Bearing: For smooth and reliable performance.Air...

In stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

NEMA17 Stepper Motor for Precision & Power in DIY Projects

NEMA17 Stepper Motor for Precision & Power in DIY Projects 2

In stock

Stepper Motors

NEMA17 (42STH48-2504AC)

LDO

35331

kr156.00

Introducing the NEMA17 (42STH48-2504AC), a high-performance stepper motor designed to offer precision and power in a compact package. This motor is perfect for your 3D printer, CNC machine, or robotics project.Powerful & Precise: With a 1.8° step angle and high torque, it delivers precise, controlled movements every time.Compact & Reliable: Despite its...

HoneyBadger MGN9H Rail - High Performance & Durability

HoneyBadger MGN9H Rail - High Performance & Durability 2

In stock

Linear rails

HoneyBadger Stainless MGN9H Rail

HoneyBadger

kr76.00

Introducing the HoneyBadger Stainless MGN9H Rail, designed for superior performance and durability. Equipped with MGN9H rails featuring a medium-high custom preload, our rails deliver enhanced performance right out of the box. The new Class H Rails ensure a consistent and seamless experience. These rails come pre-lubed with EP2 for smooth and tight...

Original Gates Belts (GATES-LL-2GT) - Price per meter_767

In stock

Belts

Original Gates Belts (GATES-LL-2GT) - Price per meter

42279

kr62.40

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.

Customers who bought this product also bought:

In stock

Fans

GDSTIME 4010 24v Blower Fan - 35dBA 9500RPM

34667

kr71.20

In stock

Stepper Motors

NEMA17 (42STH48-2504AC)

LDO

35331

kr156.00

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower 2

In stock

Fans

CPAP Fan Pipe 1.8M Soft for WS7040

34695

kr199.20

Introducing our premium CPAP Fan Pipe 1.8M Soft for WS7040, the perfect companion for your WS7040 blower. This fan pipe is designed with a soft and flexible material that reduces resistance, ensuring smooth and effortless movement.Our unique shell design prevents folding or blockage, providing consistent and uninterrupted airflow. This fan pipe requires a...

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

637

kr15.20

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...

Omron G3NB-210B-1 DC5-24 Solid state relay (SSR)_3209

In stock

Relays

Omron G3NB-210B-1 DC5-24 Solid state relay (SSR)

28670

kr199.20

Input rated voltage: DC5～24V Applicable output load: 10 A at 24 to 220 VAC (at 40°C)

In stock

Belts

Original Gates Belts (GT3 LL-2MGT) - Price per meter

42279

kr52.00

Original Gates belts are produced to perfection. They are incredibly durable, and while in use, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. GT3 Gates belts are approximately 20% stiffer and stretch less than 2GT belts, while being backward compatible with the 2GT tooth profile

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

In stock

Cameras

3DO High Temperature USB Cable for Nozzle Camera (USB A to 5P) FEP+Silicone

kr72.00

High-quality USB cable for 3DO Nozzle Camera FEP Jacket with a silicone outer jacket 1 Data pair AWG28, 2 stranded power wires 28AWG Rated temeprature 200C Dynamic bending radius 24mm Static bending radius 16mm Includes 2x 5P 1.0 connectors 10x pins for connector

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980 2

In stock

Fans

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM

34188

kr55.20

Meet the GDSTIME 2510 24v Axial Fan - a high-performance cooling solution with a noise level of just 27.46dBA. Despite its compact size of 25x25x10mm, this fan boasts a whopping 12000RPM, ensuring optimal ventilation for your devices. Ball Bearing: Ensures smooth, frictionless operation.High RPM: With a speed of 12000RPM, it delivers superior cooling...

Filament cleaner for 1.75mm filament (round)_2616

Filament cleaner for 1.75mm filament (round)_2616 2

In stock

Other Accessories

Filament cleaner for 1.75mm filament (round)

6549

kr8.00

Keep your 3D printer performing at its best with our Filament Renser til 1.75mm Filament (Rund). This essential tool ensures smooth, consistent printing by effectively removing any dust or debris from your filament before it enters the extruder. Highly Effective: The round design offers comprehensive cleaning, ensuring your filament is free from any...

In stock

Thermistor

PT1000 Thermocouple

18539

kr119.20