Dragon ST HeatBreak

Name: Dragon ST HeatBreak
Brand: 3DO
SKU: 1574
Price: 160 DKK
Availability: InStock

Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

In stock

kr160.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Reference 1574

16 other products in the same category:

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

Goliath Heater Block 550°C | 3D Printer Hotend

Goliath Heater Block 550°C | 3D Printer Hotend 2

In stock

Hotend spare parts

Goliath Heater Block 550°C

kr716.00

High-performance heater block featuring: Max temperature: 550°C Fast heating: 350°C in 55s Power: 24V/100W PT1000 temperature sensor V6 nozzle compatible Compatible with Crazy & Dragon hotends

In stock

Thermistor

PT1000 Thermocouple

18539

kr119.20

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

In stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

LUKES LABORATORY

kr75.00

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

kr160.00

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

Out-of-Stock

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections.With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications.Experience unparalleled...

View

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

In stock

Hotend spare parts

Dragonfly BMS Heatsink

1582

kr160.00

Dragonfly BMS heatsink with conical heatbreak. Mounting holes fit Ends 2/3/5 and CR-10/20.

Water Block for Chube Conduction - Water-Cooled 3D Printing

Out-of-Stock

Hotend spare parts

Chube Conduction Water Block

LUKES LABORATORY

kr423.20

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

View

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab 2

Out-of-Stock

Frame accessories

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends

BIQU

kr199.20

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends - Upgrade your 3D printing with the Panda Jet, a cutting-edge cooling fan duct made from high-quality MJF nylon. Designed for the Bambu Lab P1/X1 series and compatible with Panda Flow and Revo series hot ends, this duct features an innovative air path that precisely directs cooling air to...

View

In stock

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

In stock

Hotend spare parts

Dragon HF HeatBreak

1575

kr160.00

Dragon High Flow heatbreak for Dragon heatsink. The HF model is comes with ceramic insulation which ensures less heat loss as well as longer melting zone. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle 2

Out-of-Stock

Hotend spare parts

LDO Revo™ HF Hot side Kit - 60w HeaterCore with 0.6 Nozzle

LDO

10655

kr599.20

The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd. Includes a 60W heater core and 0.6mm high flow Revo nozzle.

View

In stock

Hotend spare parts

Dragon Heat Block

1576

kr140.00

VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

In stock

Hotend spare parts

Standoff set for VZ Goliath hotend

kr87.20

In stock

Hotend spare parts

Dragonfly BMO Heatsink

1581

kr151.20

Dragonfly BMO heatsink for dragonfly conical heatbreaks. Heatsink is exclusive V6 adapter.

Customers who bought this product also bought:

In stock

Tools

Torque key for nozzle changes

6430

kr156.00

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer.Medfølger 7mm & 8mm socket, der...

Bondtech Shaft Assembly for BMG & Direct Extruders

Bondtech Shaft Assembly for BMG & Direct Extruders 2

In stock

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

In stock

Heater

20mm 50w heater - 1m

17112

kr46.40

Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas.Powerful Output: Despite its compact size,...

Voron StealthBurner LED Kit - Enhance Your 3D Printing

Voron StealthBurner LED Kit - Enhance Your 3D Printing 2

In stock

LEDs

Voron StealthBurner Fully Assembled LED Kit By Fysetc - Rainbow BARF

20620

kr71.20

Illuminate your 3D printing experience with the Voron StealthBurner Fully Assembled LED Kit by Fysetc. Designed to enhance visibility and precision, this kit is a must-have for every 3D printing enthusiast.Easy Installation: Arriving fully assembled, this kit is user-friendly, saving you time and effort.Superior Brightness: Equipped with high-quality...

Unlock 3D Printing Potential with Klipper Expander Board

Unlock 3D Printing Potential with Klipper Expander Board 2

In stock

Helper Boards

Klipper expander board

kr143.20

Unleash the full potential of your 3D printer with the Klipper Expander Board. Designed specifically for use with Klipper 3D Printer firmware, this simple MCU board is packed with powerful features. The STM32F042F6P6 MCU with an internal oscillator ensures precise control, while the SWD (Serial Wire Debug) header allows for easy debugging. 4 3A Mosfet...

GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM_3004

GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM_3004 2

In stock

Fans

GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM

34636

kr71.20

Introducing the GDSTIME 3010 24v Blower Fan - an efficient, high-speed solution for your cooling needs. This compact fan combines power and performance, operating at a swift 9500 RPM while maintaining a pleasantly low noise level of 29.2dBA.Bearing Type: Ball - for long-lasting and reliable performance.Air Flow: 1.85 CFM - ensuring efficient air...

In stock

Silicon socks

Dragon ST/HF Silicone Sock

Phaetus

1483

kr31.20

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature

In stock

Hotend spare parts

Dragon Heat Block

1576

kr140.00

Customers who bought this product also bought:

In stock

Hotend spare parts

Dragon HF HeatBreak

1575

kr160.00

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980 2

In stock

Fans

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM

34188

kr55.20

Meet the GDSTIME 2510 24v Axial Fan - a high-performance cooling solution with a noise level of just 27.46dBA. Despite its compact size of 25x25x10mm, this fan boasts a whopping 12000RPM, ensuring optimal ventilation for your devices. Ball Bearing: Ensures smooth, frictionless operation.High RPM: With a speed of 12000RPM, it delivers superior cooling...

In stock

Silicon socks

Dragon ST/HF Silicone Sock

Phaetus

1483

kr31.20

In stock

Complete hotends

Phaetus Dragon Voron

Phaetus

1067

kr591.20

Experience the power of the Phaetus Dragon Voron, a high-temperature hotend authorized by the Voron Team. Designed to fit seamlessly onto their printhead, this model is capable of handling temperatures up to 500° without any heat creep, thanks to its specially designed heatbreak. Two Heatbreak Options: Choose between the standard flow (SF) and high flow...

In stock

Hotend spare parts

Dragon Heat Block

1576

kr140.00

In stock

Tools

PTFE Cutting Knife

638

kr13.60

Make your work easier and more precise with our PTFE Cutting Knife. This knife is designed to refresh the end of a used PTFE tube, or to cut new tubes without damaging the material. With our cutting knife, you always get a straight cut and avoid deforming the PTFE tube. Precision: Always achieve a straight cut without deforming the PTFE tube....

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr30.40

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and...

In stock

Heater

20mm 50w heater - 1m

17112

kr46.40

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

637

kr15.20

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...

Upgrade Your 3D Printer: Hartk SexBolt Z Endstop for Voron V2

Upgrade Your 3D Printer: Hartk SexBolt Z Endstop for Voron V2 2

In stock

Endstops / switches

Hartk SexBolt Z Endstop Mod for Voron V2

38696

kr119.20

Upgrade your 3D printer with the Hartk SexBolt Z Endstop Mod for Voron V2. This kit is ready-to-use and features high-precision limit switches for accurate printing. The robust shell, made of nylon and glass fiber, ensures longevity and durability. This mod is specifically designed to be compatible with the VORON 2.4/Trident models. The normally closed...