BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder.

A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

In stock

kr149.00

Tax included

Email address

Product Details

16 other products in the same category:

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

In stock

Extruder spare parts

OEM IDGA Set

kr149.00

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Compatible only with the following extruders: Voron ClockWork 2 (CW2)

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr9.00

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr15.00

Thumbscrew replacement for Bondtech extruder.

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

Out-of-Stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr15.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

View

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today 2

Out-of-Stock

Extruder spare parts

Galileo 2 – Extruder Kit by LDO

kr489.00

Galileo 2 StandaloneDrop-in replacement of Orbiter 2.0 or Sherpa MiniSTL / Guide: https://github.com/JaredC01/Galileo2 Galileo 2 Stealthburnerdrop-in replacement of the CW2 extruder with Stealthburner toolheadSTL / Guide: https://github.com/JaredC01/Galileo2 Kit Includes: LDO-36STH20-1004AHG(9T) Stepper Motor, 1 piece Ring Gear Housing MFJ, 1...

View

In stock

Extruder spare parts

Bowden Tube Buckle for 6.35mm PTFE tube

198

kr5.00

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

In stock

Extruder spare parts

BMG Drive Gears IDGA Kit

kr299.00

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

Out-of-Stock

Extruder spare parts

Bondtech Internals Set for Sherpa Mini

Bondtech

41630

kr365.00

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

View

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr12.00

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

Out-of-Stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr129.00

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

View

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders 2

In stock

Extruder spare parts

OEM Reverse Integrated Drive Gear Assembly

Bondtech

kr149.00

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr79.00

LGX Steel Drive Train Upgrade for Bondtech Extruders

LGX Steel Drive Train Upgrade for Bondtech Extruders 2

In stock

Extruder spare parts

LGX Steel Drive Train Upgrade Set

kr329.00

Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder : LGX LGX Lite Recommended to feed Engineering grade thermoplastics. To use our LGX extruders above our default recommendations: with thicker mounting plates; at higher environment temperatures; at...

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

Bowden Tube Buckle for 4mm PTFE tube

kr5.00

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

kr50.00

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

Customers who bought this product also bought:

Out-of-Stock

Bearings

F695ZZ ABEC-5

45682

kr19.00

Introducing the F695ZZ ABEC-5 Flanged Ball Bearing!Engineered for precision, this high-quality bearing is designed to deliver superior performance and extended durability. It's perfect for a wide range of applications, from robotics to small machinery and more.Compact Size: With dimensions of 5*13*4mm (hole size*diameter*width), it's compact yet robust,...

View

XT30U(2+2)-F Connector for CAN Bus Toolhead Boards

In stock

Wiring

XT30U(2+2)-F Female Connector for CAN Bus Toolhead Boards

kr10.00

The XT30U(2+2)-F Female Connector by Amass is perfect for CAN Bus toolhead boards in 3D printers. This connector features built-in signal pins, eliminating the need for MOLEX terminals. Solder directly on for a secure and efficient connection. Ideal for: CAN Bus toolhead boards in 3D printers Features: Built-in signal pins, no MOLEX needed Connector...

In stock

Helper Boards

ADXL345

25399

kr36.00

Experience precise motion tracking with the compact and low-power ADXL345 accelerometer. This small yet powerful device offers 13-bit resolution and detects motion in three axes, with a maximum range of ± 16 G and sensitivity down to 0.04 G. The ADXL345 is equipped with two interrupt outputs, enabling additional features such as activity/inactivity...

In stock

Stepper Motors

NEMA17 Heatsink (adhesive)

35380

kr16.00

Keep your NEMA17 stepper motor running cool and efficient with our NEMA17 Heatsink (selvklæbende). This adhesive heat sink is designed to fit perfectly on NEMA17 size stepper motors, providing optimal heat dissipation to extend the life of your motor and improve its performance. Size: With a compact size of 40x40x11 mm, it easily fits on your motor...

3DO ASA 1KG Black - UV-resistant & Weatherproof Copolymer

3DO ASA 1KG Black - UV-resistant & Weatherproof Copolymer 2

In stock

ASA

3DO ASA 1KG - Black

3DO

52502

kr249.00

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

In stock

Extruder spare parts

Bowden Tube Buckle for 6.35mm PTFE tube

198

kr5.00

Heavy Duty TC+FEP Wire 20AWG | Industrial Cable Solutions

Heavy Duty TC+FEP Wire 20AWG | Industrial Cable Solutions 2

Out-of-Stock

Wiring

3DO High Temperature TC+FEP Wire 20AWG/0.50mm2 - 50meter

kr349.00

Heavy duty industrial wire for demanding applications TC+FEP construction - UL1332 compliant Gauge: 20AWG (0.50mm2) Strands: 100/0.08TS Outer diameter: 1.6mm Working temperature: -50°C to +200°C Minimum bend radius: 8mm static, 11mm dynamic Length: 50 meter per reel

View

SUNON 4010 24v Axial Fan - 27.3dBA 7000RPM_2750

SUNON 4010 24v Axial Fan - 27.3dBA 7000RPM_2750 2

Out-of-Stock

Fans

SUNON 4010 24v Axial Fan - 27.3dBA 7000RPM

34537

kr109.00

Stay cool and efficient with the SUNON 4010 24v Axial Fan. This compact yet powerful fan, measuring just 40*40*10mm, is perfect for any high-performance cooling needs. It operates at a voltage of DC24V and a current of 0.51A/0.83A, ensuring optimal energy consumption. With a speed of up to 10000RPM, it provides superior airflow without the noise,...

View

Customers who bought this product also bought:

In stock

Extruder spare parts

Bowden Tube Buckle for 6.35mm PTFE tube

198

kr5.00

Out-of-Stock

Wiring

3DO High Temperature TC+FEP Wire 20AWG/0.50mm2 - 50meter

kr349.00

View

Out-of-Stock

Fans

SUNON 4010 24v Axial Fan - 27.3dBA 7000RPM

34537

kr109.00

View

Out-of-Stock

Magnets

N52 Neodym Magnet 6x3mm - 50pcs black

kr149.00

Discover the power of our N52 Neodymium Magnets 6x3mm - 50pcs set. These super-strong magnets are perfect for a variety of applications, from DIY projects to professional use. High-Quality Material: Made from N52 grade neodymium, the strongest magnetic material available.Perfect Size: With a 6x3mm size, these magnets are small enough for precision work,...

View

Out-of-Stock

Bearings

F695ZZ ABEC-5

45682

kr19.00

View

In stock

Helper Boards

ADXL345

25399

kr36.00

In stock

ASA

3DO ASA 1KG - Black

3DO

52502

kr249.00

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr15.00

Thumbscrew replacement for Bondtech extruder.

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth_1087

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth_1087 2

In stock

Pulleys/Idlers/Gears

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth

42316

kr29.00

Introducing the Idler 7mm 16/20T (Bore/ID 3mm) - med/uden tænder, a high-quality idler boasting minimal tolerance of just 0.4um. This ensures you avoid the micro-slippage commonly experienced with cheaper idlers. Exceptional Quality: Crafted to perfection, this idler offers superior performance and longevity. Low Tolerance: With a minimal tolerance of...

3DO PETG 2.0 Matt 1KG - Premium Makita Blue Filament

In stock

Filament

3DO PETG 2.0 Matt 1KG - Makita Blue

3DO

50497

kr195.00

3DO PETG 2.0 is a high-performance PETG filament designed for applications requiring a blend of mechanical strength and chemical resistance. Its matte finish, improved thermal resistance, and low warping tendencies make it perfect for both professional and industrial use. Matte surface finish for a professional look High chemical resistance, ideal for...

BMG IDGA Retro-fit Set

Notify me when in stock

16 other products in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought: