PTFE Teflon 3*4mm

Colour

White

Length

2 Meters
5 Meters

In stock

kr135.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

In stock

Extruder spare parts

Extruder Spring Extra Hard

20431

kr4.80

Length 20mmThread diameter 1.2mm

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr9.60

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

In stock

Extruder spare parts

Bowden Tube Buckle

198

kr4.00

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 8.0

Bondtech

41488

kr204.00

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today 2

Out-of-Stock

Extruder spare parts

Galileo 2 – Extruder Kit by LDO

kr391.20

Galileo 2 StandaloneDrop-in replacement of Orbiter 2.0 or Sherpa MiniSTL / Guide: https://github.com/JaredC01/Galileo2 Galileo 2 Stealthburnerdrop-in replacement of the CW2 extruder with Stealthburner toolheadSTL / Guide: https://github.com/JaredC01/Galileo2 Kit Includes: LDO-36STH20-1004AHG(9T) Stepper Motor, 1 piece Ring Gear Housing MFJ, 1...

View

LDO Orbiter 2 Filament Sensor Kit_2944 2

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

kr119.20

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

Bondtech Shaft Assembly for BMG & Direct Extruders

Bondtech Shaft Assembly for BMG & Direct Extruders 2

In stock

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

kr183.20

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders 2

In stock

Extruder spare parts

OEM Reverse Integrated Drive Gear Assembly

Bondtech

kr119.20

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

In stock

Extruder spare parts

Bondtech Internals Set for Sherpa Mini

Bondtech

41630

kr292.00

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

4mm bowden collet clip

kr4.00

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr7.20

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

kr40.00

PTFE Adapter for Bambu / AMS / K1 Series – Silver

PTFE Adapter for Bambu / AMS / K1 Series – Silver 2

In stock

Accessory

Filament Hub PTFE Adapter – Bambu X1 / P1 / A1 / AMS / AD5M / K1 Series

kr15.20

Filament Hub PTFE Adapter – Expansion port for smooth material feeding on Bambu and Creality printers. This lightweight, durable adapter is made of aluminum alloy and plastic, designed for a precise fit with Bambu Lab and K1 series printers. Compatible With: Bambu Lab X1 / P1 / A1 / A1 mini / AMS Creality AD5M / AD5M Pro / K1 Series...

Customers who bought this product also bought:

3DO PLA 2.0 Tough 1KG - Asphalt Grey: Enhanced 3D Printing Filament

3DO PLA 2.0 Tough 1KG - Asphalt Grey: Enhanced 3D Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Asphalt Grey

3DO

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

HoneyBadger P-Series PEI Beds for 3D Printing

HoneyBadger P-Series PEI Beds for 3D Printing 2

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds

HoneyBadger

33742

kr150.00

Experience the ultimate in 3D printing with the HoneyBadger P-Series Smooth Black PEI beds. Crafted from premium Japanese PEI, this printing surface is as smooth as glass, ensuring flawless prints every time. Durable: Features 0.5mm spring steel for superior strength and longevity (0.4mm on Bambu, in line with OEM specifications). High Quality: Made...

3DO Nano 3Port USB HUB - Compact USB 2.0 Expansion

3DO Nano 3Port USB HUB - Compact USB 2.0 Expansion 2

In stock

Helper Boards

3DO Nano 3Port USB HUB

3DO

kr76.00

Expand Your USB Connectivity with the 3DO Nano 3-Port USB Hub The 3DO Nano 3-Port USB Hub is available in two variants, offering flexibility for your specific needs. Whether you require a compact solution for tight spaces or a more robust connection, this USB 2.0 hub has you covered. Variants: 12x12mm Solder Pad Version: Ideal for ultra-compact...

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Steel Blue

3DO

50497

kr143.20

Phaetus Rapido Plus v2 (PT1000): 3D Printing Revolution

Phaetus Rapido Plus v2 (PT1000): 3D Printing Revolution 2

In stock

Complete hotends

Phaetus Rapido Plus v2 (PT1000)

Phaetus

kr716.00

Experience the power of the Phaetus Rapido Plus v2 (PT1000), an upgraded 3D printing innovation designed for high-speed, high-temperature printing. This state-of-the-art tool features a modular heater, thermistor, and block construction for reduced maintenance costs and enhanced durability.Its new heat block design boasts a larger melt zone, perfect for...

In stock

Extruder spare parts

4mm bowden collet clip

kr4.00

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

Super Pinda Probe by FYSETC for MK3S+ & Mini+

Super Pinda Probe by FYSETC for MK3S+ & Mini+ 2

Out-of-Stock

Probes

Super Pinda by fysetc

12740

kr151.20

Super pinda probe by fysetc, used in their mk3s+ and mini+. Excellent repeatability 5v sensor

View

Customers who bought this product also bought:

Voron v2.4 Build Platform Kit with LDO Heater

Voron v2.4 Build Platform Kit with LDO Heater 2

In stock

Build surfaces

Voron v2.4 Build Platform Kit, Featuring LDO Heating System

LDO

kr1,516.00

This product features a high-quality build platform designed for optimal 3D printing performance: The build plate is cast Aluminium and Blanchard ground for a perfectly flat surface. The flex plate is double-sided with PEI coating: one side is smooth for fine details, and the other is textured for easy print removal. It simplifies print removal,...

PG7 Cable Gland with Strain Relief - Protect Your Cables

PG7 Cable Gland with Strain Relief - Protect Your Cables 2

In stock

Electronics

PG7 Cable gland with strain relief - 1pcs

kr12.00

Secure your cables efficiently with our PG7 Kabelforskruning med trækaflastning - 1stk. This high-quality cable gland is designed to provide superior strain relief, ensuring your cables remain intact and functional. Durable: Made from robust materials, it guarantees long-lasting performance.Easy Installation: Its simple design allows for effortless setup...

3DO USB/Enclosure Camera Kit V2 - Sony 4K for 3D Printers

3DO USB/Enclosure Camera Kit V2 - Sony 4K for 3D Printers 2

In stock

Cameras

3DO USB / Enclosure Camera Kit V2 - Sony 4K for 3D Printers

3DO

kr316.00

3DO USB / Enclosure Camera Kit V2 - Sony 4K for 3D Printers – A fully modular solution designed for 3D printers requiring high precision and flexibility.This kit allows you to customize your setup with quality components tailored for enclosure or general USB cameras. After recognizing the potential of DIY camera projects, we developed a robust "USB...

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM_1295

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM_1295 2

Out-of-Stock

Bearings

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM

34193

kr55.20

Introducing the GDSTIME 5015 24v Blower Fan – a powerful, compact, and quiet cooling solution. This high-performance fan operates at a swift 6000 RPM, ensuring optimal cooling for your devices. Despite its impressive speed, it maintains a low noise level at 34.6dBA, enabling a peaceful work environment. Ball Bearing for smooth, long-lasting operation....

View

Adhesive insulation - thickness 10mm_1435

Adhesive insulation - thickness 10mm_1435 2

-50%

In stock

Spare parts for print bed

Adhesive insulation - thickness 10mm

33364

kr19.60 kr39.20

Adhesive multi-size cotton insulation, 10 mm thick

In stock

Bed adhesives

DimaFix Spray

6272

kr95.20

Experience the perfect adhesion every time with DimaFix Spray. Engineered for materials that are challenging to adhere, like ABS/ASA, it's an essential tool for 3D printing. Excellent Adhesion: Say goodbye to warping. DimaFix ensures a strong bond between your print and the bed, especially with high-temperature materials and a heatbed over 70C.Easy...

3DO PLA 2.0 Tough 1KG: Superior, Fast Printing PLA

3DO PLA 2.0 Tough 1KG: Superior, Fast Printing PLA 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Black

3DO

50497

kr143.20

AzureFilm Silk PLA Dark Copper 1Kg - Flawless 3D Prints

AzureFilm Silk PLA Dark Copper 1Kg - Flawless 3D Prints 2

In stock

PLA

AzureFilm Silk PLA Dark Copper 1Kg

AzureFilm

FL171-8004

kr143.20

Made in EU, high quality PLA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 200–230°C Heated bed: Not required (recommended 50–60°C) Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

Buy LDO 3x2 XH Splicer PCB for Efficient Electronic Projects

Buy LDO 3x2 XH Splicer PCB for Efficient Electronic Projects 2

In stock

Electronics

LDO 3x2 XH Splicer PCB

kr12.00

Introducing the LDO 3x2 XH Splicer PCB, the ultimate solution for your electronic project needs. This high-quality printed circuit board is designed to provide reliable and efficient connections, boosting the performance of your devices. High-quality Material: Our PCB is made from robust and durable material, ensuring longevity and resistance to wear and...

Honey Badger Textured Beds | Enhanced Durability

Honey Badger Textured Beds | Enhanced Durability 2

In stock

Build surfaces

Honey Badger Semi-Satin Dual-Sided Textured PEI sheet

HoneyBadger

kr219.00

Material: Special blend of PEI with added Polycarbonate for superior adhesion Temperature Resistance: High temp capability up to 220°C Versatility: Suitable for all materials and engineering-grade polymers Finish: Coated on both sides, offering a unique semi-satin texture