M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_16

M6 Pneumatic Connector for 4mm PFTE tube

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

In stock

kr9.60

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Reference 199

Viewed products

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

In stock

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

1915

kr9.60

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

16 other products in the same category:

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech

41487

kr204.00

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 8.0

Bondtech

41488

kr204.00

In stock

Extruder spare parts

Bowden Tube Buckle

198

kr4.00

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

In stock

Extruder spare parts

Bondtech Internals Set for Sherpa Mini

Bondtech

41630

kr292.00

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

Bondtech Shaft Assembly for BMG & Direct Extruders

Bondtech Shaft Assembly for BMG & Direct Extruders 2

In stock

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

kr40.00

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

4mm bowden collet clip

kr4.00

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

In stock

Extruder spare parts

BMG Drive Gears IDGA Kit

kr239.20

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

Bambu X1/P1P Extrusion Gear Kit: CNC Nanocoated Upgrade

In stock

Extruder spare parts

Improved Bambu X1/P1P CNC Nanocoated Extrusion Gear Kit

kr199.20

Elevate your 3D printing experience with our Improved Nano Coating Extrusion Gear Kit designed for Bambu 3D Printers. This meticulously engineered kit enhances your printer's extrusion system performance. Key Features: Integrated Shaft Design: Ensures superior gear concentricity, reducing eccentric rotation during assembly for even filament transport....

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr7.20

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda CNC Extruder Housing for Bambu Lab

BIQU

kr284.00

Premium lightweight extruder housing in aerospace-grade aluminum - 20% lighter than standard housing! CNC-milled AI6061T6 aluminum with open frame structure Optimized cooling design keeps motor stable during extended prints Premium anodized finish for durability and corrosion protection Drop-in upgrade...

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

OEM RIDGA V2 Set: Enhanced 3D Print Quality

OEM RIDGA V2 Set: Enhanced 3D Print Quality 2

Out-of-Stock

Extruder spare parts

OEM RIDGA (V2) Set

Bondtech

kr119.20

A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Designed for the following Open Source extruders: HextrudORT Sherpa Mini Voron Mini StealthBurner Why a V2? The OEM RIDGA V2 allows for ideal engagement between main gear and an 8T or 10T motor gear, while retaining a safe...

View

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

In stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

Customers who bought this product also bought:

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower 2

In stock

Fans

CPAP Fan Pipe 1.8M Soft for WS7040

34695

kr199.20

Introducing our premium CPAP Fan Pipe 1.8M Soft for WS7040, the perfect companion for your WS7040 blower. This fan pipe is designed with a soft and flexible material that reduces resistance, ensuring smooth and effortless movement.Our unique shell design prevents folding or blockage, providing consistent and uninterrupted airflow. This fan pipe requires a...

In stock

Extruder spare parts

Improved Bambu X1/P1P CNC Nanocoated Extrusion Gear Kit

kr199.20

In stock

Complete hotends

Phaetus Dragonfly BMS

Phaetus

1041

kr320.00

Upgrade your Ender or CR series printer with the Phaetus Dragonfly BMS for a superior printing experience. This model supports temperatures up to 500°C, significantly higher than standard hotends. Key benefits include:Increased Flowrate: The Dragonfly BMS delivers a faster flowrate, enhancing your printer's efficiency.Improved Precision: Benefit from...

HoneyBadger MGN12H Stainless Rail - Enhanced Performance

HoneyBadger MGN12H Stainless Rail - Enhanced Performance 2

In stock

Linear rails

HoneyBadger Stainless MGN12H Rail

LDO

32404

kr240.00

Experience superior performance with the HoneyBadger Rustfri MGN12H Rail. This rail features MGN12H rails with medium-high custom preload, ensuring smooth operation and enhanced efficiency. The New! Class H Rails provide a consistent and improved out-of-the-box experience, eliminating the need for tedious setup. Pre-lubed with EP2, these rails are ready...

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770

In stock

Belts

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter

42280

kr79.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. The EPDM version of Gates is made to stand between -45C to 135C, with the standard version going -35C to 80C.In addition, the EPDM version has up to 2x loins live time...

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration 2

In stock

Other Accessories

Nevermore StealthMax Filter Kit (Hardware Only)

kr556.00

Advanced 3D printer air filtration kit featuring: Raspberry Pi Pico W WiFi module HEPA filter system (2.5 micron filtration) 24V to 12V step-down converter Pre-soldered electronics Plug-and-play installation Compatible with 4mm activated carbon (not included) Print files: github.com/nevermore3d/StealthMax

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

AzureFilm PETG White 1Kg - High-Quality 3D Printing Filament

In stock

PETG

AzureFilm PETG White 1Kg

AzureFilm

FG171-9010

kr119.20

Made in EU, high quality PETG, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 220–240°C Heated bed: Recommended 60-80°C Print speed: 50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

Customers who bought this product also bought:

In stock

Spare parts for print bed

Glass Hotbed Clip 1stk

33245

kr4.80

Out-of-Stock

Bed adhesives

DimaFix Pen

6273

kr87.20

Experience the ultimate convenience in 3D printing with the DimaFix Pen. This gas-free adhesive solution ensures a perfect grip on your print bed every time, eliminating the risk of warping. It's especially recommended for materials that are difficult to adhere, like ABS/ASA. Optimized for use with heatbed and high-temperature materials, performing best...

View

In stock

Heat inserts

Heat Insert M3/M4/M5

6484

kr103.20

Introducing our top-tier Brass Heat Insert M3/M4/M5, an essential tool for all your DIY projects. These heat inserts are known for their exceptional durability and high performance. Superior Quality: Crafted from high-grade brass, these inserts are resistant to corrosion and offer a long lifespan.Excellent Performance: Designed to provide secure,...

HoneyBadger 5015 Blower Fan 6400RPM PWM - High-Speed Cooling

HoneyBadger 5015 Blower Fan 6400RPM PWM - High-Speed Cooling 2

In stock

Fans

5015 blower fan by HoneyBadger - 6400 RPM (PWM version)

HoneyBadger

kr71.20

Introducing the robust HoneyBadger P-Series 5015 Blower Fan, expertly engineered for your printer's cooling needs. With its Class A insulation, this workhorse can withstand temperatures up to 95°C, making it perfect for enclosed environments. This PWM version fan features a dual ball bearing construction for enhanced durability and a powerful speed of...

BIQU MicroProbe V2.0: High-Precision 3D Printer Upgrade

BIQU MicroProbe V2.0: High-Precision 3D Printer Upgrade 2

In stock

Probes

BIQU MicroProbe V2.0

kr207.20

Product Parameters Product Name: MicroProbe Total Weight: 6g Voltage: 5V Standby Current: 3mA Maximum Current: 600mA Cable Length: 1.5 m Wiring: 5 pins, 1.25 mm Pitch Working Chamber Temperature: ≤60℃ Accuracy: 0.001mm Standard Deviation @24℃ Ambient, 60℃ Bed 0.003mm Standard Deviation @60℃ Ambient, 100℃ Bed Lifespan: 10,000,000+...

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM_1295

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM_1295 2

In stock

Bearings

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM

34193

kr55.20

Introducing the GDSTIME 5015 24v Blower Fan – a powerful, compact, and quiet cooling solution. This high-performance fan operates at a swift 6000 RPM, ensuring optimal cooling for your devices. Despite its impressive speed, it maintains a low noise level at 34.6dBA, enabling a peaceful work environment. Ball Bearing for smooth, long-lasting operation....

Nevermore Carbon Pellets: High-Quality Air Filtration

Nevermore Carbon Pellets: High-Quality Air Filtration 2

Product available with different options

Other Accessories

Nevermore Carbon Pellets

6645

kr92.00

Introducing Nevermore Aktivt Kul, the latest high-quality carbon product from the creators of the renowned Nevermore filters. Specially crafted for air filtration, our carbon lasts up to 2x longer than standard carbon pellets, ensuring cleaner, fresher air for longer. It's expertly designed to capture more Volatile Organic Compounds, enhancing your air...

View

Out-of-Stock

Wiring

WAGO 5x 0.08 - 4.0 mm

kr4.40

Upgrade your electrical connections with the WAGO 5x 0.08 - 4.0 mm! This compact and versatile connector is perfect for a variety of wiring tasks, ensuring safe and reliable connections every time. Universal Compatibility: With a size range of 0.08 - 4.0 mm, it can accommodate a wide range of wire sizes.Easy to Use: Its user-friendly design allows for...

View

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_2766

Out-of-Stock

Lubrication

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

6588

kr95.20

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

View

Original Gates Belts (GATES-LL-2GT) - Price per meter_767

In stock

Belts

Original Gates Belts (GATES-LL-2GT) - Price per meter

42279

kr62.40

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.