VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

Standoff set for VZ Goliath hotend

In stock

kr87.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Viewed products

BIGTREETECH EZ5160 Pro V1.0 (High Volt Driver)_3019

BIGTREETECH EZ5160 Pro V1.0 (High Volt Driver)_3019 2

In stock

Stepper Drivers

BIGTREETECH EZ5160 Pro V1.0 (High Volt Driver)

BIQU

27640

kr144.00

Experience power and precision with the BIGTREETECH EZ5160 Pro V1.0 High Volt Driver, your reliable partner for all your high voltage needs. Engineered with a TMC5160-TA driver chip, this high-performance device delivers superior functionality and performance. Power Supply Voltage: With a voltage range of 8-48V, it offers flexibility and compatibility...

16 other products in the same category:

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer 2

In stock

Hotend spare parts

Chube Air Water Block

LUKES LABORATORY

kr423.20

Does your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you! Just remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.

Rapido2.0 Heateblock: Advanced Heating Solution

In stock

Hotend spare parts

Rapido2.0 Heateblock

kr196.00

Goliath Heater Block 550°C | 3D Printer Hotend

Goliath Heater Block 550°C | 3D Printer Hotend 2

-32%

In stock

Hotend spare parts

Goliath Heater Block 550°C (Dragon hotend compatible)

kr486.88 kr716.00

High-performance heater block featuring: Max temperature: 550°C Fast heating: 350°C in 55s Power: 24V/100W PT1000 temperature sensor V6 nozzle compatible Compatible with Crazy & Dragon hotends

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

In stock

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatblock

1577

kr176.00

In stock

Heater

Ceramic Heater X1C

kr31.20

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab

Panda Jet Cooling Fan Duct | Enhanced 3D Printing for Bambu Lab 2

In stock

Frame accessories

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends

BIQU

kr199.20

Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends - Upgrade your 3D printing with the Panda Jet, a cutting-edge cooling fan duct made from high-quality MJF nylon. Designed for the Bambu Lab P1/X1 series and compatible with Panda Flow and Revo series hot ends, this duct features an innovative air path that precisely directs cooling air to...

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

kr160.00

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr30.40

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and...

XOL Toolhead Rev for Voron Printers - Top Performance

XOL Toolhead Rev for Voron Printers - Top Performance 2

In stock

Hotend spare parts

XOL (newest rev) Toolhead by Armchair Engineering 12k

kr236.00

One of the lightest, highest performing tool heads available for the Voron printer family.Now shipping the newest revision of XOL including bones! Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOM Cube. After finding that...

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

In stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

kr199.20

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

BIQU Eco Turbo Kit | CPAP Cooling Upgrade for 3D Printer

BIQU Eco Turbo Kit | CPAP Cooling Upgrade for 3D Printer 2

In stock

Fans

BIQU Eco Turbo Kit - CPAP-Grade Cooling for 3D Printers

BIQU

kr290.00

Upgrade your 3D printer with CPAP-grade cooling at an affordable price! High-performance Nidec brushless turbo fan with dedicated adapter board Plug-and-play installation with pre-crimped connectors Wide compatibility: Supports 5-24V (24V power required) Specially optimized for Voron 2.4 with complete...

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

Out-of-Stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

LUKES LABORATORY

kr75.00

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

View

In stock

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections.With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications.Experience unparalleled...

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

VZ Goliath M3 PT1000 Thermistor Set - Precision Hotend Upgrade

In stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20

Customers who bought this product also bought:

XT30U(2+2)-F Connector for CAN Bus Toolhead Boards

In stock

Wiring

XT30U(2+2)-F Female Connector for CAN Bus Toolhead Boards

kr8.00

The XT30U(2+2)-F Female Connector by Amass is perfect for CAN Bus toolhead boards in 3D printers. This connector features built-in signal pins, eliminating the need for MOLEX terminals. Solder directly on for a secure and efficient connection. Ideal for: CAN Bus toolhead boards in 3D printers Features: Built-in signal pins, no MOLEX needed Connector...

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

kr40.00

3DO ASA 1KG RatRig Green - UV-Resistant Copolymer

3DO ASA 1KG RatRig Green - UV-Resistant Copolymer 2

In stock

ASA

3DO ASA 1KG - RatRig Green

3DO

52599

kr199.20

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr12.00

Thumbscrew replacement for Bondtech extruder.

Premium Silicone Sock for VZ Goliath Hotend - Heat Protection

In stock

Silicon socks

Silicone sock for VZ Goliath hotend

kr47.20

Phaetus PS M6 Copper Nozzle 1,75 mm_2777

Phaetus PS M6 Copper Nozzle 1,75 mm_2777 2

-40%

In stock

Nozzle

Phaetus PS M6 Copper Nozzle 1,75 mm

Phaetus

4592

kr47.04 kr78.40

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

MOONS' NEMA14 High-Temperature Motor for 3D Printers

MOONS' NEMA14 High-Temperature Motor for 3D Printers 2

In stock

Stepper Motors

Moons NEMA14 36mm 10T - High Temperature

kr151.20

Introducing the MOONS' NEMA14 36mm 10T High-Temperature Motor - the first of its kind designed specifically for 3D printers. This motor is engineered to operate efficiently up to 130 degrees Celsius and maintains an impressive 80% energy efficiency even at 180 degrees Celsius. Its unique bearing design, utilized as the flange surface, maximizes stator...

Customers who bought this product also bought:

In stock

Stepper Motors

Moons NEMA14 36mm 10T - High Temperature

kr151.20

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr12.00

Thumbscrew replacement for Bondtech extruder.

Silica Gel 1Kg - Loose beads with indicator_1737

Silica Gel 1Kg - Loose beads with indicator_1737 2

In stock

Storage Solutions

Silica Gel 1Kg - Loose beads with indicator

46414

kr156.00

Introducing the Silica Gel 1Kg - Løse kulger med indicator, your ultimate solution for absorbing unwanted moisture. This 1Kg silica gel works efficiently to trap condensation, ensuring a dry and safe environment.Highly Absorbent: The silica gel absorbs moisture and locks it in, protecting your belongings from dampness and humidity.Color Indicator: It...

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

Voron Heat Insert M3X5X4MM Black 100pcs - Upgrade Projects

In stock

Heat inserts

Heat Insert M3X5X4MM (voron type) - Black 100pcs

Linneo

kr119.20

Upgrade your assembly projects with our Heat Insert M3X5X4MM (voron type) - Sort 100stk! These high-quality heat inserts are designed to provide a robust and reliable connection in your plastic components. Superior Quality: Manufactured with precision, these inserts ensure a perfect fit for M3 screws, enhancing the durability and longevity of your...

In stock

Wiring

XT30U(2+2)-F Female Connector for CAN Bus Toolhead Boards

kr8.00

SUPER POWER LDO-42STH48: High-Torque, Compact Stepper Motor

SUPER POWER LDO-42STH48: High-Torque, Compact Stepper Motor 2

In stock

Stepper Motors

SUPER POWER (LDO-42STH48-2804AH-R) with round shaft

LDO

35332

kr231.20

Experience the Power of Precision with the SUPER POWER (LDO-42STH48-2804AH-R) with Round Shaft. This high-performance device is designed to deliver superior efficiency and accuracy in a compact design. Perfect for a range of applications, from robotics to CNC machines, it's the ultimate solution for your mechanical needs.High Torque Output: With its...

In stock

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

In stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20