Rapido 2.0 PT1000 Thermistor

€56.41

Interested in water-cooling your Chube Conduction? Just replace your Conduction's heatsink with our new water block, and integrate Chube into your favorite water-cooling 3dp system.

View

LGX Lite Pro Adapter | Chube VC4 Toolhead Mount

In stock

Hotend spare parts

LGX Lite Pro Adapter Plate for Chube VC4 Toolhead

Specially designed adapter plate for mounting LGX Lite Pro to your Chube VC4 toolhead. Precision manufactured for perfect fit Specifically designed for the Chube version of VC4 Easy installation and secure mounting Important: This adapter plate is ONLY compatible with the Chube version of VC4 toolhead - not the standard VC4 version.

€10.00

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

€21.33

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

Out-of-Stock

Thermistor

NTC 3950 Thermistor P1P/X1C

€2.03

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections. With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications. Experience...

View

VZ Goliath Hotend Standoff Set: Enhance Your 3D Printing

In stock

Hotend spare parts

Standoff set for VZ Goliath hotend

€11.62

Rapido2.0 Heateblock: Advanced Heating Solution

Out-of-Stock

Hotend spare parts

Rapido2.0 Heateblock

€26.13

View

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

In stock

Hotend spare parts

Phaetus Rapido 2 / Rapido 2F Thermistor – PT1000 (Updated)

€10.13

Replacement PT1000 thermistor for Phaetus Rapido 2 and Rapido 2F hotends. Accurate temperature sensing and easy installation. Official updated Phaetus spare part.

In stock

Hotend spare parts

Dragonfly BMS/BMO Heatblock

1577

€23.46

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle 2

Out-of-Stock

Hotend spare parts

LDO Revo™ HF Hot side Kit - 60w HeaterCore with 0.6 Nozzle

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

10655

€79.87

The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd. Includes a 60W heater core and 0.6mm high flow Revo nozzle.

View

In stock

Hotend spare parts

Dragon ST HeatBreak

1574

€21.33

Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

In stock

Hotend spare parts

Dragonfly BMO Heatsink

1581

€20.15

Dragonfly BMO heatsink for dragonfly conical heatbreaks. Heatsink is exclusive V6 adapter.

In stock

Heater

Ceramic Heater X1C

€4.16

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer

Water Block for Chube Air - Integrate into Water-Cooled 3D Printer 2

Out-of-Stock

Hotend spare parts

Chube Air Water Block

Does your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you! Just remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.

€56.41

View

XOL Toolhead Rev for Voron Printers - Top Performance

XOL Toolhead Rev for Voron Printers - Top Performance 2

Out-of-Stock

Hotend spare parts

XOL (newest rev) Toolhead by Armchair Engineering 12k

€31.46

One of the lightest, highest performing tool heads available for the Voron printer family.Now shipping the newest revision of XOL including bones! Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOM Cube. After finding that...

View

Chube Toolplate | Black Anodized for RatRig V-Core 4

Out-of-Stock

Hotend spare parts

Chube Toolplate for RatRig V-Core 4 - Black Anodized

Premium toolplate in 6061 aluminum, specially designed for RatRig V-Core 4 with Chube toolhead setup. Manufactured from high-quality 6061 aluminum Black anodized finish for increased durability Precision manufactured for perfect fit Based on the popular Chube VC4 design This premium toolplate is specifically designed for the Chube toolhead...

€21.59

View

Goliath Heater Block 550°C | 3D Printer Hotend

Goliath Heater Block 550°C | 3D Printer Hotend 2

Out-of-Stock

Hotend spare parts

Goliath Heater Block 550°C (Dragon hotend compatible)

€95.44

High-performance heater block featuring: Max temperature: 550°C Fast heating: 350°C in 55s Power: 24V/100W V6 nozzle compatible Compatible with Crazy & Dragon hotends

View

Customers who bought this product also bought:

Premium Silicone Sock for VZ Goliath Hotend - Heat Protection

In stock

Silicon socks

Silicone sock for VZ Goliath hotend

€6.29

3DO 5050 WWCW SK6812 LED Pack - Bright, Compact Lighting

In stock

Cameras

3DO 5050 WWCW SK6812 LED (10Pcs.)

€13.33

We made this tiny 5050 (5mm x 5mm) WWCW LED, doing our nozzle camera project, as we wanted as much light as possible, while still keeping the SK6812 protocol. Single LED: 5mm x 5mm / 0.2" x 0.2" We don't have any more specifics about this particular LED other than it is 6000-6500K color temp and has 3 white LEDs in place of the regular Red/Green/Blue...

In stock

Bearings

F8-16M ABEC-5

45389

€1.71

Experience the exceptional performance of the F8-16M ABEC-5! This high-quality, precision-engineered product is designed to deliver unparalleled speed and smoothness. Perfect for a variety of applications, it's sure to exceed your expectations. Precision-engineered for ultimate performance and durability.Features ABEC-5 rated bearings for superior speed...

HoneyBadger MGN12H Stainless Rail - Enhanced Performance

HoneyBadger MGN12H Stainless Rail - Enhanced Performance 2

In stock

Linear rails

HoneyBadger Stainless MGN12H Rail

Experience superior performance with the HoneyBadger Rustfri MGN12H Rail. This rail features MGN12H rails with medium-high custom preload, ensuring smooth operation and enhanced efficiency. The New! Class H Rails provide a consistent and improved out-of-the-box experience, eliminating the need for tedious setup. Pre-lubed with EP2, these rails are ready...

32404

€31.99

XT30U(2+2)-F Connector for CAN Bus Toolhead Boards

In stock

Wiring

XT30U(2+2)-F Female Connector for CAN Bus Toolhead Boards

€1.07

The XT30U(2+2)-F Female Connector by Amass is perfect for CAN Bus toolhead boards in 3D printers. This connector features built-in signal pins, eliminating the need for MOLEX terminals. Solder directly on for a secure and efficient connection. Ideal for: CAN Bus toolhead boards in 3D printers Features: Built-in signal pins, no MOLEX needed Connector...

HoneyBadger 3010 24V Axial Fan - High-Performance Cooling

In stock

Fans

3010 Performance axial fan 24v by HoneyBadger

Introducing the HoneyBadger 3010 Performance Axial Fan 24V, a part of the esteemed P-Series. Engineered with a robust motor and high static pressure, it is perfect for modern toolheads of all types. This fan is designed to deliver optimal performance consistently.Model: 3010B-24V-13800Construction: Built with a dual ball bearing for durability and...

€7.36

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Out-of-Stock

Other Accessories

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

€20.15

Pre-prepared 50/50 mix of Nevermore Carbon and Nevermore Scorch; a less-hassle, best-of-both-worlds printer filtration Combining the long-life och stellar adsobtion capacity of activated carbon with Nevermore Scorch performance in hot surroundings. Ideal for most users with enclosed 3d printers printing ABS/ASA/PETG/PC in chamber temps of 50C +-10C.

View

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing 2

In stock

Helper Boards

BTT Smart Filament Sensor SFS V2.0

25156

€23.35

Introducing the BTT Smart Filament Sensor SFS V2.0, an innovative solution for your 3D printing needs. This advanced sensor ensures optimal performance by accurately monitoring filament consumption in real-time. Smart Detection: The sensor can detect filament breakage, run-out, and even blockage for a seamless 3D printing experience.High Compatibility: It...

Customers who bought this product also bought:

NEMA17 SUPER POWER Stepper Motor - High Torque & Precision

NEMA17 SUPER POWER Stepper Motor - High Torque & Precision 2

In stock

Stepper Motors

NEMA17 SUPER POWER (42STH48-2804AH)

Unleash the power of the NEMA17 SUPER POWER (42STH48-2804AH) stepper motor! This high-performance motor is designed to deliver superior torque and precision for all your automation needs. Superior Torque: With its high torque capacity, it ensures optimal performance even in demanding applications.High Precision: It offers precise control and positioning,...

35332

€30.82

In stock

Fans

3010 Performance axial fan 24v by HoneyBadger

€7.36

HoneyBadger MGN9H Rail - High Performance & Durability 2

In stock

Linear rails

HoneyBadger Stainless MGN9H Rail

Introducing the HoneyBadger Stainless MGN9H Rail, designed for superior performance and durability. Equipped with MGN9H rails featuring a medium-high custom preload, our rails deliver enhanced performance right out of the box. The new Class H Rails ensure a consistent and seamless experience. These rails come pre-lubed with EP2 for smooth and tight...

€10.13

In stock

Bearings

F8-16M ABEC-5

45389

€1.71

In stock

Relays

Alpha Therm Thermal Fuse - SK150

18632

€5.23

Thermal fuse, to be used as a failsafe against malfunction in heat producing elements. Example: A faulty thermistor can cause an incorrectly reading of the temperature and thereby signaling the heater to keep producing heat past the target temperature and possibly starting a fire. Rated Temperature: 150c Trigger “Fusing” Temperature: 145 ± 2c...

Buy Rapido 2.0 Heater Clips for Efficient Heating

In stock

Hotend spare parts

Rapido 2.0 Heater Clips

€5.33

IWS-D10 Wire Stripper & Cutter – 0.03–10mm²

IWS-D10 Wire Stripper & Cutter – 0.03–10mm² 2

In stock

Tools

IWS-D10 Wire Stripper & Cutter (0.03–10mm² / 25–5 AWG)

€19.09

IWS-D10 Wire Stripper & Cutter – A multifunctional tool for quick and precise stripping of 0.03–10mm² wires without manual adjustments. Perfect for both professional and DIY use, this automatic wire stripper is built for efficiency and ease. Key Features: Self-Adjusting: Automatically adapts to wire sizes from 25–5 AWG (0.03–10mm²). Built-in...

High Temp Silicone Sealant Black 80g - Resists -65°C to +380°C

Out-of-Stock

Other Accessories

High Temperature Silicone Sealant - Black 80g

€4.16

High-temperature resistant sealant, resistant to high (+380°C) and low temperatures (-65°C). Elastic, fast curing sealant that forms lasting, not shrinking and UV-resistant fi lling compound. Seals and glues most surfaces such as glass, ceramics, aluminum and metal perfectly. curing time: 3 mm/24 h tooling time: 10-20 min operating temperature from...

View

LDO Orbiter V2.5 - Premium Direct Drive Extruder System

LDO Orbiter V2.5 - Premium Direct Drive Extruder System 2

In stock

Complete extruders

LDO Orbiter V2.5 Direct Drive Extruder

€56.41

HoneyBadger P-Series PEI Beds for 3D Printing

HoneyBadger P-Series PEI Beds for 3D Printing 2

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds