Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Pre-prepared 50/50 mix of Nevermore Carbon and Nevermore Scorch; a less-hassle, best-of-both-worlds printer filtration
Combining the long-life och stellar adsobtion capacity of activated carbon with Nevermore Scorch performance in hot surroundings.
Ideal for most users with enclosed 3d printers printing ABS/ASA/PETG/PC in chamber temps of 50C +-10C.

In stock

kr151.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

Nevermore Carbon Pellets: High-Quality Air Filtration

Nevermore Carbon Pellets: High-Quality Air Filtration 2

Product available with different options

Other Accessories

Nevermore Carbon Pellets

Introducing Nevermore Aktivt Kul, the latest high-quality carbon product from the creators of the renowned Nevermore filters. Specially crafted for air filtration, our carbon lasts up to 2x longer than standard carbon pellets, ensuring cleaner, fresher air for longer. It's expertly designed to capture more Volatile Organic Compounds, enhancing your air...

View

Threadlocker Low Strength 10ml - Secure Metal Threads Easily

In stock

Other Accessories

Threadlocker low strength 10ml

Threadlocker / adhesive for securing metal threaded connections with low strength bonding. Binding in contact with metal surfaces in the absence of air. low strength initial binding up to 15 minutes full strength: steel – after 6 hours, stainless steel – after 24 hours, brass – after 1 hour temperature resistance from -55°C to +150°C

Bambu Lab Anti-Vibration Feet | Shock Absorbing Printer Pads

Bambu Lab Anti-Vibration Feet | Shock Absorbing Printer Pads 2

In stock

Other Accessories

Anti Vibration Feet For Bambu Lab X1/P1P - set of 4pcs

Enhanced printer stabilization feet featuring: Effective vibration dampening Dust-proof design Easy installation - direct replacement Improved printer isolation Increases printer height for better access

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration 2

In stock

Other Accessories

Nevermore Scorch S 850ml: Revolutionize Your 3D Printing Air Filtration

Standard (750 ml, 0.66 kg) XL (2300 ml, 2 kg) Experience unmatched efficiency with the Nevermore Scorch S 850ml, a superior air filtration solution for 3D printers. Specially designed for high-temperature environments, Scorch surpasses traditional carbon filters. Its innovative formula, a blend of zeolite and potassium permanganate, effectively captures...

Voron-Inspired Mouse Pad with Sleek Black Border

Voron-Inspired Mouse Pad with Sleek Black Border 2

Out-of-Stock

Other Accessories

Voron-Inspired Mouse Pad

Size: Expansive 900X400mm. Base: Sturdy, non-slip rubber for ultimate stability. Thickness: Comfortable 4 mm for enhanced user experience. Design: Features the distinct Voron logo with superior print quality. Style: A sleek black border that defines elegance and sophistication. Collaboration: Officially licensed from the Voron Team, blending...

View

Filament cleaner for 1.75mm filament (round)_2616

Filament cleaner for 1.75mm filament (round)_2616 2

In stock

Other Accessories

Filament cleaner for 1.75mm filament (round)

Keep your 3D printer performing at its best with our Filament Renser til 1.75mm Filament (Rund). This essential tool ensures smooth, consistent printing by effectively removing any dust or debris from your filament before it enters the extruder. Highly Effective: The round design offers comprehensive cleaning, ensuring your filament is free from any...

Ultra Strong Super Glue 20g - Fast Curing for All Plastics

In stock

Other Accessories

Super Glue - ultra strong 20g

Experience the power of our Super Glue - ultra strong 20g, a one-component, fast-curing adhesive designed for unbeatable strength and durability. With its low viscosity, it's perfect for bonding all types of plastic and rubber, ensuring a secure hold every time. Whether you're working with PLA, PETG, ASA, ABS, or TPU, our super glue has you covered. It's...

Micron-Inspired Mouse Pad with Sleek Black Border

Micron-Inspired Mouse Pad with Sleek Black Border 2

In stock

Other Accessories

Micron-Inspired Mouse Pad

Size: Expansive 900X400mm. Base: Sturdy, non-slip rubber for ultimate stability. Thickness: Comfortable 4 mm for enhanced user experience. Design: Features the distinct Micron logo with superior print quality. Style: A sleek black border that defines elegance and sophistication.

High-Strength Threadlocker 50ml for Secure Metal Joints

In stock

Other Accessories

Threadlocker high strength 50ml (for fixed installation)

Secure your metal thread joints with our high-strength Threadlocker 50ml. Engineered for fixed installations, this powerful adhesive offers exceptional binding strength, activating upon contact with metal surfaces and in the absence of oxygen.High binding strength: Ensures a stable, long-lasting bond.Corrosion protection: Shields your threads from...

High Temp Silicone Sealant Black 80g - Resists -65°C to +380°C

In stock

Other Accessories

High Temperature Silicone Sealant - Black 80g

High-temperature resistant sealant, resistant to high (+380°C) and low temperatures (-65°C). Elastic, fast curing sealant that forms lasting, not shrinking and UV-resistant fi lling compound. Seals and glues most surfaces such as glass, ceramics, aluminum and metal perfectly. curing time: 3 mm/24 h tooling time: 10-20 min operating temperature from...

Bambu A1 mini Silicone Nozzle Brush | 3D Printer Cleaning Tool

In stock

Other Accessories

Silicone Nozzle Brush for Bambu A1 Mini (3pcs)

Gentle nozzle cleaning brushes featuring: Soft silicone construction - won't scratch nozzles Easy to clean and maintain Highly reusable design Compatible with Bambu A1 Mini 3 pieces per pack

HEPA filter for Paean & nevermore mini

Out-of-Stock

Other Accessories

HEPA filter for Paean & nevermore mini

Designed to enhance Nevermore activated carbon filtration systems, the Paean HEPA Filter is your next step for safer printing. It helps maintain a clean and welcoming environment around your printer or any space you select. 190mm x 45mm

View

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration 2

In stock

Other Accessories

Nevermore StealthMax Filter Kit (Hardware Only)

Advanced 3D printer air filtration kit featuring: Raspberry Pi Pico W WiFi module HEPA filter system (2.5 micron filtration) 24V to 12V step-down converter Pre-soldered electronics Plug-and-play installation Compatible with 4mm activated carbon (not included) Print files: github.com/nevermore3d/StealthMax

Creality K1 Series Silicone Nozzle Brush | 3D Printer Cleaning Tool

Creality K1 Series Silicone Nozzle Brush | 3D Printer Cleaning Tool 2

In stock

Other Accessories

Silicone Nozzle Brush for Creality K1 Series (3pcs)

Gentle nozzle cleaning brushes featuring: Soft silicone construction - won't scratch nozzles Easy to clean and maintain Compatible with K1, K1C, and K1 MAX Effective residue removal 3 pieces per pack

3DO Panda Plushie 23cm

In stock

Other Accessories

3DO Panda Plushie 23cm

Plastic Repellent Paint™_2071

Plastic Repellent Paint™_2071 2

In stock

Other Accessories

Slice Engineering Plastic Repellent Paint™

Safeguard your 3D printer's nozzles and hotblock with Slice Engineering Plastic Repellent Paint™.This innovative solution is a water-based PTFE nanosuspension designed to repel plastic from your printer's vital components. Its easy-to-use brush top allows for quick and uniform application, bonding with clean metal surfaces to form a dry, transparent...

Customers who bought this product also bought:

Voron V0.1 wiring kit_1483

Voron V0.1 wiring kit_1483 2

In stock

Wiring

Voron V0.1 wiring kit

Experience the ease and convenience of the Komplet Voron V0.1 ledningsnet, a plug-and-play solution for your electrical needs. This high-quality wiring harness is designed to provide seamless connectivity and superior performance.Plug-and-Play: No need for complicated setups. Just plug it in and you're good to go.High-Quality: Made with top-notch...

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)_1762

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)_1762 2

In stock

Lubrication

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)

Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It is ideally suited for industrial machinery and equipment. Machinery lasts longer, downtime is reduced, and productivity is increased. It is an...

PTFE Cutting Knife_83

PTFE Cutting Knife_83 2

In stock

Tools

PTFE Cutting Knife

Make your work easier and more precise with our PTFE Cutting Knife. This knife is designed to refresh the end of a used PTFE tube, or to cut new tubes without damaging the material. With our cutting knife, you always get a straight cut and avoid deforming the PTFE tube. Precision: Always achieve a straight cut without deforming the PTFE tube....

Bed Spring 4 pcs (Hard)_743

Bed Spring 4 pcs (Hard)_743 2

In stock

Spare parts for print bed

Bed Spring 4 pcs (Hard)

PTFE Teflon 2*4mm_352

PTFE Teflon 2*4mm_352 2

In stock

Extruder spare parts

PTFE Teflon 2*4mm

3DO Enclosure / Nozzle Camera V2 DSP PCB

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 DSP PCB

The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Steel Blue

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

4010 Blower P-Series Fan - High-Speed 9500rpm Cooling Solution

4010 Blower P-Series Fan - High-Speed 9500rpm Cooling Solution 2

In stock

Fans

4010 blower P-Series fan by HoneyBadger

Introducing the 4010 Blower P-Series Fan by HoneyBadger, designed for high-performance and reliability. This compact yet powerful fan operates at a stunning 9500 rpm ±10%, ensuring consistent and efficient air circulation. Powered by a 24v supply, it delivers an impressive airflow of ~3 cfm ±10%. The static pressure is yet to be determined, but rest...

Customers who bought this product also bought:

Unlock 3D Printing Potential with Klipper Expander Board

Unlock 3D Printing Potential with Klipper Expander Board 2

In stock

Helper Boards

Klipper expander board

Unleash the full potential of your 3D printer with the Klipper Expander Board. Designed specifically for use with Klipper 3D Printer firmware, this simple MCU board is packed with powerful features. The STM32F042F6P6 MCU with an internal oscillator ensures precise control, while the SWD (Serial Wire Debug) header allows for easy debugging. 4 3A Mosfet...

LDO ABS Filament Dark Teal | Premium 1kg AMS Compatible

LDO ABS Filament Dark Teal | Premium 1kg AMS Compatible 2

In stock

ABS

LDO Premium ABS Filament - Dark Teal 1kg - AMS Compatible

Premium ABS filament in dark teal from LDO - professional quality for demanding prints. Precise 1.75mm ±0.02mm diameter tolerance Excellent layer adhesion and impact resistance High heat resistance (HDT: 97°C) Perfect for functional prototypes and end-use parts This high-performance ABS filament is designed for professionals who demand strong...

3DO Enclosure / Nozzle Camera V2 FPC Cable

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 FPC Cable

FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

N52 Neodymium Magnets 6x3mm 50pcs - Super Strong & Versatile

In stock

Magnets

N52 Neodym Magnet 6x3mm - 50pcs black

Discover the power of our N52 Neodymium Magnets 6x3mm - 50pcs set. These super-strong magnets are perfect for a variety of applications, from DIY projects to professional use. High-Quality Material: Made from N52 grade neodymium, the strongest magnetic material available.Perfect Size: With a 6x3mm size, these magnets are small enough for precision work,...

Voron Mechanical endstop XY_2748

Voron Mechanical endstop XY_2748 2

In stock

Endstops / switches

Voron Mechanical endstop XY

Introducing the Voron Mekanisk Endstop XY, a top-tier mechanical limit switch designed for precision and reliability in your 3D printing projects. This high-quality endstop ensures accurate positioning, offering a seamless printing experience. Key Features:Precision: Guarantees exact positioning to avoid printing errors.Reliability: Made with robust...

Alpha Term Thermal Fuse - SK150_2990

In stock

Relays

Alpha Therm Thermal Fuse - SK150

Thermal fuse, to be used as a failsafe against malfunction in heat producing elements. Example: A faulty thermistor can cause an incorrectly reading of the temperature and thereby signaling the heater to keep producing heat past the target temperature and possibly starting a fire. Rated Temperature: 150c Trigger “Fusing” Temperature: 145 ± 2c...

608ZZ ABEC-5_1663

608ZZ ABEC-5_1663 2

Out-of-Stock

Bearings

608ZZ ABEC-5

Experience the excellence of the 608ZZ ABEC-5, a top-tier, high-performance bearing designed for maximum efficiency and durability. Perfect for a variety of applications, from skateboards to 3D printers, it's a versatile solution for all your bearing needs. Superior Performance: With ABEC-5 precision rating, enjoy smoother, quieter operation and higher...

View

3DO Budget ASA – 1kg Random Colors (1.75mm)

3DO Budget ASA – 1kg Random Colors (1.75mm) 2

-35%

In stock

ASA

3DO Budget ASA – 1kg Random Colors 1.75mm

kr72.80 kr112.00

Make the most of your 3D printing projects with our 3DO Budget ASA !This filament is ideal for prototyping and experimentation, perfect for those who want to add a touch of unique, random colors to their designs. Each spool is vacuum packed in a sturdy cardboard box.Please note that colors may vary, and each spool may contain nuances and color shifts,...

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...

Zero G Mercury One Kit for Ender 5/Pro - Core XY Upgrade

Zero G Mercury One Kit for Ender 5/Pro - Core XY Upgrade 2

In stock

Frame kits

Zero G Mercury One Kit

What is it The Mercury One kit is designed for the Ender 5/Pro Core XY conversion, built to BOM+ specifications using high-quality materials, including complete stainless steel bolts, stainless steel linear rails, and motors. For more information about the Mercury One project, click here. Preorder Information: Items are expected to arrive by early...

Product added to wishlist