PTFE Teflon 2*4mm

Colour

White
Transperant
Blue

Length

1 Meter
2 Meters

In stock

kr40.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Reference 16451

16 other products in the same category:

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

kr183.20

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

In stock

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

1915

kr9.60

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

In stock

Extruder spare parts

OEM IDGA Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Compatible only with the following extruders: Voron ClockWork 2 (CW2)

OEM RIDGA V2 Set: Enhanced 3D Print Quality

OEM RIDGA V2 Set: Enhanced 3D Print Quality 2

In stock

Extruder spare parts

OEM RIDGA (V2) Set

Bondtech

kr119.20

A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Designed for the following Open Source extruders: HextrudORT Sherpa Mini Voron Mini StealthBurner Why a V2? The OEM RIDGA V2 allows for ideal engagement between main gear and an 8T or 10T motor gear, while retaining a safe...

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech

41487

kr204.00

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders 2

In stock

Extruder spare parts

OEM Reverse Integrated Drive Gear Assembly

Bondtech

kr119.20

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

Bowden Tube Buckle for 4mm PTFE tube

kr4.00

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers 2

In stock

Complete extruders

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO

kr439.20

The Jabberwocky Basic Kit delivers a robust, easy-to-maintain toolhead tailored for multi-material printers.Equipped with Bondtech drive gears, a NEMA14 motor, tool-free hinged extruder, and efficient cooling fans, it ensures reliable filament handling and clean swaps.Includes integrated cutter, filament sensor, and status LEDs—an excellent foundation for...

50-Tooth CNC Hollow POM Gear - Precision & Strength

50-Tooth CNC Hollow POM Gear - Precision & Strength 2

In stock

Extruder spare parts

50 Tooth Pom Gear

41729

kr72.00

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda Jetpack Cooling Cover for Bambu Lab Printers

BIQU

kr284.00

Upgrade your Bambu Lab printer with this innovative MJF nylon cooling cover Premium lightweight design with enhanced airflow Specially designed air outlet for optimal nozzle cooling Reduces deformation in overhangs and bridges Crafted from high-quality MJF nylon with excellent temperature...

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

Out-of-Stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

View

LDO Orbiter 2 Filament Sensor Kit_2944 2

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

kr119.20

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

Customers who bought this product also bought:

3DO 5050 WWCW SK6812 LED Pack - Bright, Compact Lighting

In stock

Cameras

3DO 5050 WWCW SK6812 LED (10Pcs.)

kr100.00

We made this tiny 5050 (5mm x 5mm) WWCW LED, doing our nozzle camera project, as we wanted as much light as possible, while still keeping the SK6812 protocol. Single LED: 5mm x 5mm / 0.2" x 0.2" We don't have any more specifics about this particular LED other than it is 6000-6500K color temp and has 3 white LEDs in place of the regular Red/Green/Blue...

LDO 2x2 XH Splicer PCB: Compact & High-Performance

LDO 2x2 XH Splicer PCB: Compact & High-Performance 2

In stock

Electronics

LDO 2x2 XH Splicer PCB

kr9.60

Introducing the LDO 2x2 XH Splicer PCB - a high-quality, reliable solution for your electronic projects. This compact PCB is designed to offer seamless connectivity and superior performance. Highly Compatible: The LDO 2x2 XH Splicer PCB is compatible with a wide range of devices, making it an ideal choice for various applications.Superior Performance:...

3DO PETG 1KG Transparent Filament - High Quality & Durable

In stock

PETG

3DO PETG 1KG - Transperant

3DO

51505

kr151.20

3DO PETG is designed for a wide variety of applications where a good mix of mechanical and optical material properties is required.The raw material has been authorized in accordance with FDA, REACH, and RoHS regulations.At a wall thickness of 3.2 mm, PETG is flame retardant according to UL 94. Nozzle: 225-245°C Heatbed: 60-70°C

In stock

Tools

Plastic trimmer knife

6196

kr31.20

Refine your 3D prints with our ergonomically designed finishing tool. Its precision tip easily removes excess material and enhances details, while the durable plastic ensures long-lasting use. Lightweight and easy to maneuver for a flawless finish. Suitable for various print materials.

3D Print Filament Vacuum Bags - Keep Filaments Dry & Ready

3D Print Filament Vacuum Bags - Keep Filaments Dry & Ready 2

Out-of-Stock

Storage Solutions

3D Print Filament Reusable Vacuum Storage Bags - 10 Pack

kr47.20

Optimize your 3D printing experience with our set of 10 Genanvendelige Vakuum Opbevaringsposer til 3D Filament. These reusable vacuum storage bags, measuring 300 x 340mm, are perfect for keeping your filaments dry, dust-free, and ready for use. Each lightweight bag (only 22g) features a robust construction with a special blue seal for an airtight...

View

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Out-of-Stock

Other Accessories

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

kr151.20

Pre-prepared 50/50 mix of Nevermore Carbon and Nevermore Scorch; a less-hassle, best-of-both-worlds printer filtration Combining the long-life och stellar adsobtion capacity of activated carbon with Nevermore Scorch performance in hot surroundings. Ideal for most users with enclosed 3d printers printing ABS/ASA/PETG/PC in chamber temps of 50C +-10C.

View

In stock

T-nuts

T-Nut (Spring) M3 - 100Pcs (for 2020 profil)

54691

kr119.20

Enhance your construction and DIY projects with our T-Nut (Spring) M3 - 100Stk (til 2020 profiler). Perfectly designed for 2020 profile systems, these T-Nuts provide a secure, sturdy, and reliable connection. High Quality: Made from durable, rust-resistant material, ensuring longevity and performance.Easy Installation: Spring-loaded ball bearing on the...

In stock

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

1915

kr9.60

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

Customers who bought this product also bought:

In stock

Hotend spare parts

Dragon HF HeatBreak

1575

kr199.20

Dragon High Flow heatbreak for Dragon heatsink. The HF model is comes with ceramic insulation which ensures less heat loss as well as longer melting zone. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

In stock

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

In stock

Heat inserts

LDO Heat Insert tool M3

LDO

6338

kr39.20

Introducing the LDO Heat Insert Værktøj M3, your ultimate tool for inserting heat-set inserts in M3 size. This tool conveniently attaches to a compatible soldering iron, making your work easier and more efficient.Efficient: Designed for precise and quick insertion of heat-set inserts.Compatible: Easily attaches to your existing soldering iron.Quality:...

EBB SB2209 CAN Kit for Voron StealthBurner - Enhance 3D Printing

In stock

CAN BUS Boards

EBB SB2209 CAN V1.0 for Voron StealthBurner

kr279.20

Introducing the EBB SB2209 CAN V1.0 for Voron StealthBurner - your ultimate solution for achieving the highest quality 3D printing. This kit is designed to provide smooth, efficient, and reliable operation of your Voron StealthBurner. EBB SB2209 includes: EBB 2209 CAN x1 - the heart of the system, ensuring accurate, high-speed performance. EBB SB0000...

In stock

Silicon socks

Dragonfly BMS/BMO Silicone Sock

Phaetus

1484

kr31.20

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature

High-Quality AzureFilm PETG 1Kg for Clear, Vibrant 3D Prints

Out-of-Stock

PETG

AzureFilm PETG Transp. 1Kg

AzureFilm

FG171-0000

kr119.20

Made in EU, high quality PETG, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 220–240°C Heated bed: Recommended 60-80°C Print speed: 50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

View

In stock

Bearings

F8-16M ABEC-5

45389

kr12.80

Experience the exceptional performance of the F8-16M ABEC-5! This high-quality, precision-engineered product is designed to deliver unparalleled speed and smoothness. Perfect for a variety of applications, it's sure to exceed your expectations. Precision-engineered for ultimate performance and durability.Features ABEC-5 rated bearings for superior speed...

In stock

Bearings

F695ZZ ABEC-5

45682

kr15.20

Introducing the F695ZZ ABEC-5 Flanged Ball Bearing!Engineered for precision, this high-quality bearing is designed to deliver superior performance and extended durability. It's perfect for a wide range of applications, from robotics to small machinery and more.Compact Size: With dimensions of 5*13*4mm (hole size*diameter*width), it's compact yet robust,...

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

In stock

Extruder spare parts

BMG Drive Gears IDGA Kit

kr239.20

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

GDSTIME 2510 5v Axial Fan - 27.46dBA 12000RPM_981

GDSTIME 2510 5v Axial Fan - 27.46dBA 12000RPM_981 2

In stock

Fans

GDSTIME 2510 5v Axial Fan - 27.46dBA 12000RPM

34186

kr55.20

Introducing the GDSTIME 2510 5v Axial Fan - a compact, high-performance cooling solution. With a Ball Bearing design and a remarkable 12000 RPM, this fan delivers an efficient airflow of 2.45 CFM and an air pressure of 0.24 In H2O.Enjoy quiet operation with a noise level of just 27.46 dBA.Powered by a 24VDC voltage, it consumes a mere 0.15A, making it an...