High-Quality 4mm Bowden Collet Clip for 3D Printers

Bowden Tube Buckle for 4mm PTFE tube

In stock

kr4.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr7.20

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr9.60

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34 2

In stock

Extruder spare parts

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

1913

kr9.60

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

kr183.20

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

Bondtech Shaft Assembly for BMG & Direct Extruders

Bondtech Shaft Assembly for BMG & Direct Extruders 2

In stock

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

In stock

Extruder spare parts

Extruder Spring Extra Hard

20431

kr4.80

Length 20mmThread diameter 1.2mm

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders 2

In stock

Extruder spare parts

OEM Reverse Integrated Drive Gear Assembly

Bondtech

kr119.20

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

In stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr12.00

Thumbscrew replacement for Bondtech extruder.

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 8.0

Bondtech

41488

kr204.00

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

In stock

Extruder spare parts

Bowden Tube Buckle for 6.35mm PTFE tube

198

kr4.00

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

PTFE Adapter for Bambu / AMS / K1 Series – Silver

PTFE Adapter for Bambu / AMS / K1 Series – Silver 2

In stock

Accessory

Filament Hub PTFE Adapter – Bambu X1 / P1 / A1 / AMS / AD5M / K1 Series

kr15.20

Filament Hub PTFE Adapter – Expansion port for smooth material feeding on Bambu and Creality printers. This lightweight, durable adapter is made of aluminum alloy and plastic, designed for a precise fit with Bambu Lab and K1 series printers. Compatible With: Bambu Lab X1 / P1 / A1 / A1 mini / AMS Creality AD5M / AD5M Pro / K1 Series...

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda CNC Extruder Housing for Bambu Lab

BIQU

kr284.00

Premium lightweight extruder housing in aerospace-grade aluminum - 20% lighter than standard housing! CNC-milled AI6061T6 aluminum with open frame structure Optimized cooling design keeps motor stable during extended prints Premium anodized finish for durability and corrosion protection Drop-in upgrade...

Customers who bought this product also bought:

In stock

Bearings

608ZZ ABEC-5

45388

kr9.60

Experience the excellence of the 608ZZ ABEC-5, a top-tier, high-performance bearing designed for maximum efficiency and durability. Perfect for a variety of applications, from skateboards to 3D printers, it's a versatile solution for all your bearing needs. Superior Performance: With ABEC-5 precision rating, enjoy smoother, quieter operation and higher...

In stock

Endstops / switches

Limit Switch with 1m Cable

38206

kr31.20

Discover the power and versatility of our Limit Switch with 1m Cable. This robust device is designed to control machinery and equipment, providing a high level of safety and reliability. High Durability: Built to withstand harsh conditions, ensuring long-lasting performance.Flexible Installation: Comes with a 1m cable for easy and flexible installation in...

In stock

Pulleys/Idlers/Gears

Pulley 2GT 16T (Bore/ID 5mm)

42384

kr19.20

Experience the power of precision with our Pulley 2GT 16T (Bore/ID 5mm). This high-quality pulley boasts a minimal tolerance of just 0.4um, ensuring you avoid the micro slippage often seen with cheaper alternatives.Manufactured using original molds/tools supplied by Gates, this pulley adheres to the stringent specifications and requirements set by the...

BIQU Universal Turbo Kit - CPAP Blower Fan, 6.5KPA, 45,000 RPM

BIQU Universal Turbo Kit - CPAP Blower Fan, 6.5KPA, 45,000 RPM 2

In stock

Fans

BIQU Universal Turbo Kit CPAP WS7040 Blower Fan

BIQU

kr439.20

Enhanced Performance: Experience up to 6.5KPA air pressure, 45,000 RPM speed, and 14.7 CFM air volume, thanks to our specially designed adapter plate that maximizes the brushless driver's potential. Effortless Connectivity: Enjoy quick-connect terminals and a 2-meter cable that can be easily customized to fit your printer layout, simplifying the...

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr30.40

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and...

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770

In stock

Belts

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter

42280

kr79.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. The EPDM version of Gates is made to stand between -45C to 135C, with the standard version going -35C to 80C.In addition, the EPDM version has up to 2x loins live time...

HoneyBadger P-Series PEI Beds for 3D Printing

HoneyBadger P-Series PEI Beds for 3D Printing 2

In stock

Build surfaces

HoneyBadger P-Series Smooth Black PEI beds

HoneyBadger

33742

kr150.00

Experience the ultimate in 3D printing with the HoneyBadger P-Series Smooth Black PEI beds. Crafted from premium Japanese PEI, this printing surface is as smooth as glass, ensuring flawless prints every time. Durable: Features 0.5mm spring steel for superior strength and longevity (0.4mm on Bambu, in line with OEM specifications). High Quality: Made...

Customers who bought this product also bought:

External Soldering Iron Tip Kit for Heat Inserts | Advanced 3D Tools

In stock

Tools

External Universal Soldering Iron Heat Insert Tip Kit

kr60.00

External Universal Soldering Iron Heat Insert Tip Kit - Elevate your soldering efficiency with this versatile tool, compatible with standard 936 soldering iron tips. Designed for sizes M2 to M8, this kit facilitates the embedding of hot-melt copper nuts and inserts in plastics and 3D printed components. Interchangeable with standard 936 general-purpose...

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Steel Blue

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

Chube Air Hotend: High-Performance, Lightweight 3D Printing

Chube Air Hotend: High-Performance, Lightweight 3D Printing 2

In stock

Complete hotends

Chube Air

LUKES LABORATORY

kr1,836.00

The Chube Air hotend delivers exceptional high-flow, high-speed, high-temperature printing in a compact and lightweight design. Compact and Lightweight: 42mm meltzone, weighs 69g Advanced Technology: Features Chalice Heatbreak for extreme temperature handling and heat creep prevention Durable and Efficient: Rated for 500°C operation, perfect for...

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Anthracite

3DO

50497

kr143.20

In stock

Bearings

608ZZ ABEC-5

45388

kr9.60

In stock

Extruder spare parts

PTFE Teflon 3*4mm

kr63.20

Alpha Therm SK130 Thermal Fuse - Safety & Reliability

In stock

Relays

Alpha Therm Termisk sikring - SK130

kr39.20

Thermal fuse, to be used as a failsafe against malfunction in heat producing elements. Example: A faulty thermistor can cause an incorrectly reading of the temperature and thereby signaling the heater to keep producing heat past the target temperature and possibly starting a fire. Rated Temperature: 130c Trigger “Fusing” Temperature: 125 ± 2c Rated...

GDSTIME 3007 5v Axial Fan - 31.6dBA 12000RPM_3010

In stock

Fans

GDSTIME 3007 5v Axial Fan - 31.6dBA 12000RPM

34637

kr60.00

Experience the power and efficiency of the GDSTIME 3007 5v Axial Fan. With a high-speed rotation of 12000 RPM and an impressive air flow of 3.93 CFM, this fan delivers top-notch cooling performance. Despite its power, it maintains a relatively low noise level of 31.6dBA, ensuring a quiet operation. Ball Bearing: Ensures smooth, long-lasting operation.5VDC...

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)_1762

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)_1762 2

In stock

Lubrication

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)

6419

kr49.60

Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It is ideally suited for industrial machinery and equipment. Machinery lasts longer, downtime is reduced, and productivity is increased. It is an...

NEMA17 SUPER POWER S80 Stepper Motor for Precision Control

NEMA17 SUPER POWER S80 Stepper Motor for Precision Control 2

In stock

Stepper Motors

NEMA17 SUPER POWER (42STH48-2804AH) S80

LDO

35332

kr247.20

Introducing the NEMA17 SUPER POWER (42STH48-2804AH) S80 - a top-tier stepper motor designed for superior performance and reliability. This powerhouse guarantees exceptional precision and control, making it ideal for a wide range of applications.High Torque: The NEMA17 SUPER POWER delivers an impressive torque output, ensuring optimal performance even in...