Front page

Showing 625-648 of 667 item(s)

FLY DSI-LCD 5 | 5-inch Touch Display for RPi & 3D Printers

FLY DSI-LCD 5 | 5-inch Touch Display for RPi & 3D Printers 2

Out-of-Stock

Displays

FLY DSI-LCD 5 Touch Display for RPi (5-inch IPS)

Premium 5-inch DSI display featuring: 5-inch IPS panel (800×480, 60Hz) 5-point capacitive touch control 6H tempered glass (1.8mm thick) Direct Raspberry Pi mounting 4 smart function buttons Operating temp: 0-60°C Premium foam adhesive mounting Compatible with Raspberry Pi 5 (15-pin) & older models (22-pin)

View

LDO BoxTurtle | Open Source AFC Kit for Klipper & VORON Printers

Out-of-Stock

3D Printer

LDO BoxTurtle AFC Kit for Klipper Printers

Premium multi-material unit kit featuring: LDO premium pancake stepper motors AFC-Lite board (CAN/USB compatible) Anodized aluminum extrusions Omron D2HW filament sensors Pre-crimped cable set included MJF printed PA12 gears for respooler included Filametrix & Turtle Neck buffer kits Complete mounting hardware Lane-based system - no...

View

DLC Extruder Gear For Creality K1/K1C/K1 Max

Out-of-Stock

Extruder spare parts

DLC Extruder Gear For Creality K1/K1C/K1 Max

High-precision CNC machined extruder gear with DLC coating, made from premium mold steel with 62-65 HRC hardness. Specifically designed for Creality K1, K1C, and K1 Max.Features razor-sharp extruding teeth for optimal filament grip and enhanced printing quality. Perfect for carbon fiber materials with superior wear and corrosion resistance.

View

GL-C-310WL Mini WLED Controller With Music Sync For LED Strips

GL-C-310WL Mini WLED Controller With Music Sync For LED Strips 2

Out-of-Stock

LEDs

GLEDOPTO ESP32 WLED Mini Controller For Addressable LED Strips

Compact WLED controller (Model: GL-C-310WL) with built-in microphone for music-reactive lighting effects in a space-saving design.Key Features:- Built-in microphone for music synchronization- Three RGB output channels- WiFi control via WLED app- Ultra-compact size: 42x38x17mm- Operating voltage: DC 5-24V- Maximum current: 10A total (6A per channel)-...

View

3220M Precision Crimping Tool For Micro Connectors 32-20AWG

3220M Precision Crimping Tool For Micro Connectors 32-20AWG 2

Out-of-Stock

Tools

IWISS 3220M Micro Connector Pin Crimping Tool

Professional micro connector crimping tool with precision EDM-cut jaws for superior crimping quality. Model: IWS-3220M.Key Features:- Wire capacity: 0.03-0.52mm² (32-20 AWG)- Double-layer EDM precision-cut jaws- Parallel crimping design for 30% better tightness- Simultaneous conductor and insulation crimping- Ergonomic TPE handles with ratchet...

View

LDO Orbiter V2.5 Upgrade Kit | Official Extruder Upgrade

LDO Orbiter V2.5 Upgrade Kit | Official Extruder Upgrade 2

Out-of-Stock

Extruder spare parts

LDO Motors Orbiter V2.5 Upgrade Kit for V2.0 Extruder

Upgrade your Orbiter V2.0 Extruder to the latest V2.5 version with this complete upgrade kit from LDO Motors. This official upgrade kit contains all necessary components to upgrade your existing V2.0 extruder, including pre-assembled shaft and precision-manufactured gear parts. Package includes: 1x Pre-assembled shaft 1x Drive gear (0.8mm width)...

View

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

Out-of-Stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

LUKES LABORATORY

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

View

LDO ASA-CF Carbon Fiber | Premium UV-Resistant Filament

LDO ASA-CF Carbon Fiber | Premium UV-Resistant Filament 2

Out-of-Stock

ASA

LDO ASA-CF Carbon Fiber Filament - Black 1kg - AMS Compatible

Premium ASA with 15% carbon fiber - ultimate strength and UV resistance in one filament. Excellent UV resistance - 10x better than standard ABS 15% carbon fiber for enhanced strength and rigidity Perfect for outdoor and automotive applications Precise 1.75mm ±0.03mm diameter tolerance This high-performance filament combines ASA's weather...

View

Dragon Heat Block_322

Dragon Heat Block_322 2

Out-of-Stock

Hotend spare parts

Dragon Heat Block

View

PLATO 170 Red Flush Wire Cutter_810

PLATO 170 Red Flush Wire Cutter_810 2

Out-of-Stock

Tools

PLATO 170 Red Flush Wire Cutter

Introducing the PLATO 170 Red Thicken Plier - a must-have tool for every DIY enthusiast and professional alike. This high-quality, durable plier is designed for reliability and precision in every use.Robust Construction: Built with thickened high-carbon steel, this plier guarantees durability and long-lasting performance.Comfortable Grip: Its red PVC...

View

NEMA17 Heatsink_822

NEMA17 Heatsink_822 2

Out-of-Stock

Stepper Motors

NEMA17 Heatsink

Stay Cool with the NEMA17 HeatsinkThe NEMA17 Heatsink is a must-have for your 3D printer or CNC machine. Designed to keep your stepper motor cool, it ensures optimal performance and longevity of your device. Superior Heat Dissipation: Crafted with high-quality aluminum, it effectively pulls heat away from your motor, preventing overheating and ensuring...

View

DimaFix Spray_711

Out-of-Stock

Bed adhesives

DimaFix Spray

Experience the perfect adhesion every time with DimaFix Spray. Engineered for materials that are challenging to adhere, like ABS/ASA, it's an essential tool for 3D printing. Excellent Adhesion: Say goodbye to warping. DimaFix ensures a strong bond between your print and the bed, especially with high-temperature materials and a heatbed over 70C.Easy...

View

DimaFix Pen_713

Out-of-Stock

Bed adhesives

DimaFix Pen

Experience the ultimate convenience in 3D printing with the DimaFix Pen. This gas-free adhesive solution ensures a perfect grip on your print bed every time, eliminating the risk of warping. It's especially recommended for materials that are difficult to adhere, like ABS/ASA. Optimized for use with heatbed and high-temperature materials, performing best...

View

Flex coupler 5mm:8mm_1795

Flex coupler 5mm:8mm_1795 2

Out-of-Stock

Couplers

Flex coupler 5mm:8mm

Introducing our Flex Coupler 5mm:8mm, a must-have tool for any DIY enthusiast or professional engineer. This versatile coupling device is designed to connect two rotating shafts while allowing for some degree of misalignment or end movement.Quality Material: Crafted from high-grade aluminum, it ensures durability and long-lasting performance.Flexible...

View

BMG Drivegear kit 1.75 / 5.0_2067

Out-of-Stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

View

3DO ASA 1KG White - UV-Resistant Industrial Filament

3DO ASA 1KG White - UV-Resistant Industrial Filament 2

Out-of-Stock

ASA

3DO ASA 1KG - White

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

View

M4 Knurled Nut (DIN 466-B) - 4Pcs_2601

Out-of-Stock

Screws

M4 Knurled Nut (DIN 466-B) - 4Pcs

4 pcs. M4 Knurled Nut (DIN 466-B)

View

Heatsink for TMC2209_2658

Heatsink for TMC2209_2658 2

Out-of-Stock

Stepper Drivers

Heatsink for TMC2209

Keep your stepper motor drivers cool with the Heatsink til TMC2209. This high-quality, durable heatsink is designed specifically for TMC2209 drivers, ensuring optimal thermal management and prolonged lifespan of your hardware. Enhanced Cooling: Effectively dissipates heat, maintaining optimal operating temperatures even under high load conditions.Easy...

View

311g Super Lube® synthetic multipurpose spray oil with Syncolon® (PTFE)_3067

Out-of-Stock

Lubrication

311g Super Lube® synthetic multipurpose spray oil with Syncolon® (PTFE)

Multipurpose oil in spray form that can be safely used on anything that slides, turns or rolls. Multi-Purpose Spray Oil with Syncolon® (PTFE) is a synthetic, heavy-duty lubricant that provides excellent protection against wear.

View

3DO ASA 1KG Neon Pink: UV-Resistant & Weatherproof Filament

3DO ASA 1KG Neon Pink: UV-Resistant & Weatherproof Filament 2

Out-of-Stock

ASA

3DO ASA 1KG - Neon Pink

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

View

Out-of-Stock

T-nuts

T-Nut (Spring) M3 - 100Pcs (for 2020 profil)

Enhance your construction and DIY projects with our T-Nut (Spring) M3 - 100Stk (til 2020 profiler). Perfectly designed for 2020 profile systems, these T-Nuts provide a secure, sturdy, and reliable connection. High Quality: Made from durable, rust-resistant material, ensuring longevity and performance.Easy Installation: Spring-loaded ball bearing on the...

View

Out-of-Stock

T-nuts

T-Nut (Spring) M5 - 100Pcs (for 2020 profil)

Introducing the T-Nut (Spring) M5 - 100Stk, the perfect accessory for your 2020 profiler. These nuts are designed to provide a firm and secure connection, enhancing the stability and strength of your structures. High-Quality Material: Crafted from top-grade steel, these T-Nuts offer superior durability and resistance against wear and tear.Easy...

View

Bondtech CHT BiMetal MK8 Nozzle - Enhanced 3D Printing

Bondtech CHT BiMetal MK8 Nozzle - Enhanced 3D Printing 2

Out-of-Stock

Abrasive resistant

Bondtech CHT BiMetal MK8 Coated Nozzle

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your MK8 style heat block by 50% They are manufactured by Bondtech in-house

View

LDO V0.2 Upgrade Kit - Enhance Voron V0.1 Easily

LDO V0.2 Upgrade Kit - Enhance Voron V0.1 Easily 2

-40%

Out-of-Stock

Frame kits

LDO V0.2 Upgrade Kit - 100mm tophat

kr215.52 kr359.20

LDO kit for upgrading voron v0.1 to v0.2See whats included below.

View

1
…
26
27
28

Product added to wishlist