Threadlocker Low Strength 10ml - Secure Metal Threads Easily

Threadlocker Low Strength 10ml - Secure Metal Threads Easily

Threadlocker low strength 10ml

Threadlocker / adhesive for securing metal threaded connections with low strength bonding. Binding in contact with metal surfaces in the absence of air.

low strength
initial binding up to 15 minutes
full strength: steel – after 6 hours, stainless steel – after 24 hours, brass – after 1 hour
temperature resistance from -55°C to +150°C

In stock

kr47.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

HEPA filter for Paean & nevermore mini

Out-of-Stock

Other Accessories

HEPA filter for Paean & nevermore mini

Designed to enhance Nevermore activated carbon filtration systems, the Paean HEPA Filter is your next step for safer printing. It helps maintain a clean and welcoming environment around your printer or any space you select. 190mm x 45mm

View

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration 2

In stock

Other Accessories

Nevermore StealthMax Filter Kit (Hardware Only)

Advanced 3D printer air filtration kit featuring: Raspberry Pi Pico W WiFi module HEPA filter system (2.5 micron filtration) 24V to 12V step-down converter Pre-soldered electronics Plug-and-play installation Compatible with 4mm activated carbon (not included) Print files: github.com/nevermore3d/StealthMax

Ultra Strong Super Glue 20g - Fast Curing for All Plastics

In stock

Other Accessories

Super Glue - ultra strong 20g

Experience the power of our Super Glue - ultra strong 20g, a one-component, fast-curing adhesive designed for unbeatable strength and durability. With its low viscosity, it's perfect for bonding all types of plastic and rubber, ensuring a secure hold every time. Whether you're working with PLA, PETG, ASA, ABS, or TPU, our super glue has you covered. It's...

Nevermore Carbon Pellets: High-Quality Air Filtration

Nevermore Carbon Pellets: High-Quality Air Filtration 2

Product available with different options

Other Accessories

Nevermore Carbon Pellets

Introducing Nevermore Aktivt Kul, the latest high-quality carbon product from the creators of the renowned Nevermore filters. Specially crafted for air filtration, our carbon lasts up to 2x longer than standard carbon pellets, ensuring cleaner, fresher air for longer. It's expertly designed to capture more Volatile Organic Compounds, enhancing your air...

View

Bambu Lab Anti-Vibration Feet | Shock Absorbing Printer Pads

Bambu Lab Anti-Vibration Feet | Shock Absorbing Printer Pads 2

In stock

Other Accessories

Anti Vibration Feet For Bambu Lab X1/P1P - set of 4pcs

Enhanced printer stabilization feet featuring: Effective vibration dampening Dust-proof design Easy installation - direct replacement Improved printer isolation Increases printer height for better access

Voron-Inspired Mouse Pad with Sleek Black Border

Voron-Inspired Mouse Pad with Sleek Black Border 2

Out-of-Stock

Other Accessories

Voron-Inspired Mouse Pad

Size: Expansive 900X400mm. Base: Sturdy, non-slip rubber for ultimate stability. Thickness: Comfortable 4 mm for enhanced user experience. Design: Features the distinct Voron logo with superior print quality. Style: A sleek black border that defines elegance and sophistication. Collaboration: Officially licensed from the Voron Team, blending...

View

3DO Panda Plushie 23cm

In stock

Other Accessories

3DO Panda Plushie 23cm

Filament cleaner for 1.75mm filament (round)_2616

Filament cleaner for 1.75mm filament (round)_2616 2

In stock

Other Accessories

Filament cleaner for 1.75mm filament (round)

Keep your 3D printer performing at its best with our Filament Renser til 1.75mm Filament (Rund). This essential tool ensures smooth, consistent printing by effectively removing any dust or debris from your filament before it enters the extruder. Highly Effective: The round design offers comprehensive cleaning, ensuring your filament is free from any...

Micron-Inspired Mouse Pad with Sleek Black Border

Micron-Inspired Mouse Pad with Sleek Black Border 2

In stock

Other Accessories

Micron-Inspired Mouse Pad

Size: Expansive 900X400mm. Base: Sturdy, non-slip rubber for ultimate stability. Thickness: Comfortable 4 mm for enhanced user experience. Design: Features the distinct Micron logo with superior print quality. Style: A sleek black border that defines elegance and sophistication.

Creality K1 Series Silicone Nozzle Brush | 3D Printer Cleaning Tool

Creality K1 Series Silicone Nozzle Brush | 3D Printer Cleaning Tool 2

In stock

Other Accessories

Silicone Nozzle Brush for Creality K1 Series (3pcs)

Gentle nozzle cleaning brushes featuring: Soft silicone construction - won't scratch nozzles Easy to clean and maintain Compatible with K1, K1C, and K1 MAX Effective residue removal 3 pieces per pack

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration 2

In stock

Other Accessories

Nevermore Scorch S 850ml: Revolutionize Your 3D Printing Air Filtration

Standard (750 ml, 0.66 kg) XL (2300 ml, 2 kg) Experience unmatched efficiency with the Nevermore Scorch S 850ml, a superior air filtration solution for 3D printers. Specially designed for high-temperature environments, Scorch surpasses traditional carbon filters. Its innovative formula, a blend of zeolite and potassium permanganate, effectively captures...

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

In stock

Other Accessories

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Pre-prepared 50/50 mix of Nevermore Carbon and Nevermore Scorch; a less-hassle, best-of-both-worlds printer filtration Combining the long-life och stellar adsobtion capacity of activated carbon with Nevermore Scorch performance in hot surroundings. Ideal for most users with enclosed 3d printers printing ABS/ASA/PETG/PC in chamber temps of 50C +-10C.

High-Strength Threadlocker 50ml for Secure Metal Joints

In stock

Other Accessories

Threadlocker high strength 50ml (for fixed installation)

Secure your metal thread joints with our high-strength Threadlocker 50ml. Engineered for fixed installations, this powerful adhesive offers exceptional binding strength, activating upon contact with metal surfaces and in the absence of oxygen.High binding strength: Ensures a stable, long-lasting bond.Corrosion protection: Shields your threads from...

Plastic Repellent Paint™_2071

Plastic Repellent Paint™_2071 2

In stock

Other Accessories

Slice Engineering Plastic Repellent Paint™

Safeguard your 3D printer's nozzles and hotblock with Slice Engineering Plastic Repellent Paint™.This innovative solution is a water-based PTFE nanosuspension designed to repel plastic from your printer's vital components. Its easy-to-use brush top allows for quick and uniform application, bonding with clean metal surfaces to form a dry, transparent...

High Temp Silicone Sealant Black 80g - Resists -65°C to +380°C

Out-of-Stock

Other Accessories

High Temperature Silicone Sealant - Black 80g

High-temperature resistant sealant, resistant to high (+380°C) and low temperatures (-65°C). Elastic, fast curing sealant that forms lasting, not shrinking and UV-resistant fi lling compound. Seals and glues most surfaces such as glass, ceramics, aluminum and metal perfectly. curing time: 3 mm/24 h tooling time: 10-20 min operating temperature from...

View

Bambu A1 mini Silicone Nozzle Brush | 3D Printer Cleaning Tool

In stock

Other Accessories

Silicone Nozzle Brush for Bambu A1 Mini (3pcs)

Gentle nozzle cleaning brushes featuring: Soft silicone construction - won't scratch nozzles Easy to clean and maintain Highly reusable design Compatible with Bambu A1 Mini 3 pieces per pack

Customers who bought this product also bought:

Internal Soldering Iron Tip Kit for Heat Inserts | 3D Printing

Internal Soldering Iron Tip Kit for Heat Inserts | 3D Printing 2

In stock

Tools

Internal Universal Soldering Iron Heat Insert Tip Kit

Internal Universal Soldering Iron Heat Insert Tip Kit - Precision tools for 3D printing and plastic embedding. Fully interchangeable with standard 936 soldering iron tips, this kit supports M2 to M6 (1/4") inserts, streamlining the embedding of hot-melt copper nuts in plastics and printed parts. Compatible with standard 936 tips Ideal for hot-melt nut...

Upgrade with Voron V0.2/Mini SB Performance Fans

Upgrade with Voron V0.2/Mini SB Performance Fans 2

Out-of-Stock

Fans

Voron V0.2/Mini SB performance Fan kit By Honey Badger

Boost your toolhead's performance with the Voron V0.2/Mini SB Performance Fan Kit by Honey Badger. The kit features HoneyBadger P-Series 3010 fans, known for their sturdy motor and high static pressure. These 24V fans are designed to tackle any modern toolhead type. Kit includes:1 x HB Performance 3010 Axial fan2 x HB Performance 3010 Blower FansThese...

View

PT1000 Thermocouple_2580

PT1000 Thermocouple_2580 2

In stock

Thermistor

PT1000 Thermocouple

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

E3D RapidChange Revo™ Brass Nozzle_3135

E3D RapidChange Revo™ Brass Nozzle_3135 2

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Klicky PCB Kit: Precision 3D Printing Probe Package

Klicky PCB Kit: Precision 3D Printing Probe Package 2

In stock

Probes

Klicky PCB Kit

Everything thats great about the Klicky probe now in an awesome PCB package for even more precision. Print parts link：https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky

BIGTREETECH K-Touch: Wireless Control for Klipper 3D Printers

BIGTREETECH K-Touch: Wireless Control for Klipper 3D Printers 2

In stock

Displays

BIGTREETECH K-Touch: Wireless Control Pad for Klipper 3D Printers

BIGTREETECH K-Touch: Intuitive Wireless Control for Your Klipper 3D Printer Enhance your 3D printing experience with the K-Touch wireless control pad. Key features include: 5-inch IPS touchscreen with intuitive control panel Wireless control and monitoring (requires same WiFi network) Magnetically rechargeable battery with 30-minute life...

HoneyBadger 5015 Blower Fan 6400RPM PWM - High-Speed Cooling

HoneyBadger 5015 Blower Fan 6400RPM PWM - High-Speed Cooling 2

In stock

Fans

5015 blower fan by HoneyBadger - 6400 RPM (PWM version)

Introducing the robust HoneyBadger P-Series 5015 Blower Fan, expertly engineered for your printer's cooling needs. With its Class A insulation, this workhorse can withstand temperatures up to 95°C, making it perfect for enclosed environments. This PWM version fan features a dual ball bearing construction for enhanced durability and a powerful speed of...

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_2766

Out-of-Stock

Lubrication

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

View

Customers who bought this product also bought:

HoneyBadger V0.2 Metal Toolhead Carriage - Lightweight & Sturdy

HoneyBadger V0.2 Metal Toolhead Carriage - Lightweight & Sturdy 2

Out-of-Stock

Frame accessories

V0.2 Metal toolhead carriage for V0.2 by HoneyBadger - MGN7H

Introducing the v0.2 Metal Carriage by Honeybadger. This lightweight, yet sturdy toolhead mounting solution is designed to improve stiffness and enhance performance. It eliminates the speed penalty typically associated with metal parts while providing superior rigidity. The v0.2 Metal Carriage allows for better input shaper results and is available in...

View

GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM_3004

GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM_3004 2

In stock

Fans

GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM

Introducing the GDSTIME 3010 24v Blower Fan - an efficient, high-speed solution for your cooling needs. This compact fan combines power and performance, operating at a swift 9500 RPM while maintaining a pleasantly low noise level of 29.2dBA.Bearing Type: Ball - for long-lasting and reliable performance.Air Flow: 1.85 CFM - ensuring efficient air...

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...

HoneyBadger 5015 Blower Fan - High-Speed 7200RPM with PWM

HoneyBadger 5015 Blower Fan - High-Speed 7200RPM with PWM 2

In stock

Fans

5015 blower fan by HoneyBadger - 7200 RPM (3 wire PWM for nevermore)

Introducing the HoneyBadger 5015 Blower Fan, a high-performing addition to our P-Series fans. Engineered after rigorous testing, this fan is designed to withstand the toughest conditions, thanks to its Class A insulation rated up to 95C. Perfect for enclosed environments!Our 3 wire PWM version runs at full throttle or switches off, unless used with a 3...

Slice Engineering Thermal Paste_3254

In stock

Hotend spare parts

Slice Engineering Thermal Paste

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

3D Print Filament Vacuum Bags - Keep Filaments Dry & Ready

3D Print Filament Vacuum Bags - Keep Filaments Dry & Ready 2

In stock

Storage Solutions

3D Print Filament Reusable Vacuum Storage Bags - 10 Pack

Optimize your 3D printing experience with our set of 10 Genanvendelige Vakuum Opbevaringsposer til 3D Filament. These reusable vacuum storage bags, measuring 300 x 340mm, are perfect for keeping your filaments dry, dust-free, and ready for use. Each lightweight bag (only 22g) features a robust construction with a special blue seal for an airtight...

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM_1298

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM_1298 2

In stock

Fans

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM

Experience superior cooling with the GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM. This high-performance fan operates at a swift 6000 RPM, delivering an impressive air flow of 15.3 CFM for efficient cooling. Despite its power, it maintains a low noise level of 34.6dBA, ensuring a quiet operation.Ball Bearing: Guarantees a smooth and long-lasting...

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770 2

In stock

Belts

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. The EPDM version of Gates is made to stand between -45C to 135C, with the standard version going -35C to 80C.In addition, the EPDM version has up to 2x loins live time...

NEMA17 SUPER POWER Stepper Motor - High Torque & Precision

NEMA17 SUPER POWER Stepper Motor - High Torque & Precision 2

In stock

Stepper Motors

NEMA17 SUPER POWER (42STH48-2804AH)

Unleash the power of the NEMA17 SUPER POWER (42STH48-2804AH) stepper motor! This high-performance motor is designed to deliver superior torque and precision for all your automation needs. Superior Torque: With its high torque capacity, it ensures optimal performance even in demanding applications.High Precision: It offers precise control and positioning,...

3DLAC Stick 80ml: Premium 3D Printing Adhesive

3DLAC Stick 80ml: Premium 3D Printing Adhesive 2

In stock

Bed adhesives

3DLAC 80ml Adhesive Stick

Experience the unmatched performance of the 3DLAC Stick, a top-tier adhesive specifically crafted for FFF/FDM 3D printing. This adhesive ensures your 3D printed parts remain firmly in place throughout the printing process, effectively eliminating errors like warping.Key FeaturesSuperior Fixation: Provides an exceptional level of grip, ensuring your 3D...

Product added to wishlist