Dragon ST/HF Silicone Sock

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.
A silicone sock also helps insulate your heatblock, providing a more stable temperature

Colour

Black
Orange

In stock

kr31.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Brand

Reference 14151

7 other products in the same category:

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

Bondtech CHT® MK8 Coated Brass Nozzle_1798

In stock

Nozzle

Bondtech CHT® MK8 Coated Brass Nozzle

Bondtech

4428

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Bondtech CHT Spider Brass Nozzle for 1.75 & 2.85mm Filaments

-30%

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Bondtech

kr83.44 kr119.20

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

Customers who bought this product also bought:

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing 2

In stock

Helper Boards

BTT Smart Filament Sensor SFS V2.0

25156

kr175.20

Introducing the BTT Smart Filament Sensor SFS V2.0, an innovative solution for your 3D printing needs. This advanced sensor ensures optimal performance by accurately monitoring filament consumption in real-time. Smart Detection: The sensor can detect filament breakage, run-out, and even blockage for a seamless 3D printing experience.High Compatibility: It...

Vibration damper / Shock absorber Nema17_2813

In stock

Stepper Motors

Vibration damper / Shock absorber Nema17

35600

kr19.20

Vibrationsdæmper til Nema17 is your ultimate solution to reduce motor vibrations. Designed specifically for Nema17 stepper motors, these dampers work efficiently to minimize vibration and noise, enhancing the performance of your motors. Key features:Reduces Motor Vibrations: Effectively minimizes the vibrations of Nema17 motors, ensuring smooth...

Original Gates Belts (GATES-LL-2GT) - Price per meter_767

In stock

Belts

Original Gates Belts (GATES-LL-2GT) - Price per meter

42279

kr62.40

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

Phaetus

4583

kr308.00

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

In stock

Displays

VORON V0 DISPLAY

BIQU

25400

kr263.20

VORON V0 DISPLAY Screen size: 1.3 inches Color: Black Compatible with 3D printer VORON V0, the monitor is also compatible with the Raspberry Pi 3B+

High-Quality AzureFilm PLA Red 1Kg for 3D Printing

High-Quality AzureFilm PLA Red 1Kg for 3D Printing 2

In stock

PLA

AzureFilm PLA Red 1Kg

AzureFilm

FP171-3020

kr119.20

Made in EU, high quality PLA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 200–230°C Heated bed: Not required (recommended 50–60°C) Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

High Wattage Cartridge Heaters - 24v & 48v

Product available with different options

Heater

High Wattage Cartridge Heaters - 24v & 48v

LUKES LABORATORY

kr127.20

Cartridge Heaters Sizes: 6mm Diameter, 20mm and 47mm length Wattage: 50, 80, 100, 120, 140w Voltages: 24, 48V Casing: Rated for 550c Continuous Usage, Wires rated for up to 300c Chamber. Gauge: 18ga Wire Length: 150mm

View

Out-of-Stock

Mainboards

LDO NiteHawk SB toolhead board

LDO

kr312.00

Nitehawk is a toolhead PCB with an RP2040 MCU, TMC2209, and accelerometer, all integrated into one board. The form factor is based on HartK’s two-piece stealth burner toolhead PCB but with some minor changes. Read more here

View

Customers who bought this product also bought:

In stock

Displays

MINI12864 V1.0 LCD Screen VORON

BIQU

25358

kr103.20

2.4" High Contrast Graphic LCD MINI12864 V1.0 LCD screen as from Voron Bill of Materials Uses EXP1 and EXP2, Supports multiple colors

In stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Phaetus

4591

kr56.00

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

5015 Blower Fan by HoneyBadger | 9200 RPM, PWM/Tach Control - Open Beta

In stock

Fans

5015 Blower Fan by HoneyBadger - 9200 RPM (4 wires PWM/Tach) Open Beta

HoneyBadger

kr71.20

5015 Blower Fan by HoneyBadger - 9200 RPM (4 wires PWM/Tach) Open Beta - Upgrade your 3D printing setup with the robust HoneyBadger 5015 blower fan. Engineered for superior performance, this fan delivers a potent 9200 RPM, ensuring efficient cooling, even in enclosed spaces. With Class A insulation rated up to 95°C, it thrives in high-temperature...

In stock

Complete hotends

Phaetus Dragonfly BMO

Phaetus

1042

kr359.20

Upgrade your 3D printing capabilities with the Phaetus Dragonfly BMO, a superior alternative to the standard V6 hotend. This model supports temperatures up to 500°, enabling you to work with a wider range of materials. With its consistent flow rate and improved heatbreak precision, you'll enjoy smoother prints with fewer imperfections. High Temperature...

3DO Nozzle Camera Kit V2 - Sony 4K for 3D Printers

3DO Nozzle Camera Kit V2 - Sony 4K for 3D Printers 2

In stock

Cameras

3DO Nozzle Camera Kit V2 - Sony 4K for 3D Printers

3DO

kr316.00

3DO Nozzle Camera Kit V2 - Sony 4K for 3D Printers – A fully modular solution designed for 3D printing enthusiasts who demand flexibility and customization. Choose from various camera sensors, FPC cable lengths, and optional LED support to create the perfect setup tailored to your specific needs. After observing countless DIY nozzle camera projects, we...

3DO PLA 2.0 Tough Græsgrøn 1KG - High-Quality 3D Filament

In stock

PLA

3DO PLA 2.0 Tough 1KG - Græsgrøn

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower 2

In stock

Fans

CPAP Fan Pipe 1.8M Soft for WS7040

34695

kr199.20

Introducing our premium CPAP Fan Pipe 1.8M Soft for WS7040, the perfect companion for your WS7040 blower. This fan pipe is designed with a soft and flexible material that reduces resistance, ensuring smooth and effortless movement.Our unique shell design prevents folding or blockage, providing consistent and uninterrupted airflow. This fan pipe requires a...

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

637

kr15.20

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...