Dragon ST/HF Silicone Sock

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.
A silicone sock also helps insulate your heatblock, providing a more stable temperature

Colour

Black
Orange

In stock

kr31.20

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Brand

Reference 14151

8 other products in the same category:

E3D RapidChange Revo High Flow Nozzle for 3D Printing

In stock

Nozzle

E3D RapidChange Revo™ High Flow Nozzle

E3D

4662

kr335.20

High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials. Maximum temperature: 300°C Filament diameter:...

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

Bondtech CHT® MK8 Coated Brass Nozzle_1798

In stock

Nozzle

Bondtech CHT® MK8 Coated Brass Nozzle

Bondtech

4428

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Bondtech

kr119.20

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Customers who bought this product also bought:

3DO ASA 1KG Makita Blue: UV-Resistant Copolymer

3DO ASA 1KG Makita Blue: UV-Resistant Copolymer 2

In stock

ASA

3DO ASA 1KG - Makita Blue

3DO

52627

kr199.20

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

4010 Axial Fan 24v 9600RPM - HoneyBadger High SP Cooling

In stock

Fans

4010 Axial fan 24v by HoneyBadger - High SP (9400 RPM)

HoneyBadger

kr71.20

Experience high-performance cooling with the 4010 Axial fan 24v by HoneyBadger. This robust fan features a high-speed motor that reaches up to 9600 RPM, providing superior air flow of 9.81 CFM. With a dual ball bearing construction, it ensures long-lasting durability and efficiency. Model: 4010A-24V-9400Max Air Pressure: 9.02 mmH2ONoise: 38.25 DB - quiet...

AzureFilm ASA 1Kg: High Quality, Clear 3D Prints

AzureFilm ASA 1Kg: High Quality, Clear 3D Prints 2

In stock

ASA

AzureFilm ASA Natural 1Kg

AzureFilm

FS171-0000

kr140.00

Made in EU, high quality ASA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 240–260°C Heated bed: Recommended 100–120°C + Enclosure Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

In stock

Endstops / switches

Micro Omron SS-5GL Switch

38209

kr8.00

Discover the Micro Omron SS-5GL Switch, a compact, high-performance switch designed for optimal efficiency and reliability. This versatile device is a perfect solution for a wide range of applications, offering superior performance with minimal footprint. Compact Design: Despite its small size, the Micro Omron SS-5GL Switch delivers big on performance,...

Titanium Extrusion Backers for Voron V2.4 & Trident | Enhance Frame Ri

In stock

Frame accessories

Titanium Extrusion Backers for Voron V2.4/Trident - Honeybadger Series

kr480.00

Titanium backers for Voron V2.4 and Trident counteract the bimetallic nature of the frame and rails, creating a flatter, more rigid structure. From the Github: "Due to differing thermal expansion coefficients between steel (rails) and aluminum (extrusions), the Voron V2 gantry acts like a large bimetallic temperature sensor, warping as chamber...

In stock

Belts

Original Gates Belts (GT3 LL-2MGT) - Price per meter

42279

kr52.00

Original Gates belts are produced to perfection. They are incredibly durable, and while in use, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. GT3 Gates belts are approximately 20% stiffer and stretch less than 2GT belts, while being backward compatible with the 2GT tooth profile

HoneyBadger MGN9C Rail - Precision Engineered Linear Guides

HoneyBadger MGN9C Rail - Precision Engineered Linear Guides 2

In stock

Linear rails

HoneyBadger Stainless MGN9C Rail

LDO

32404

kr140.00

Boost your machine's performance with the HoneyBadger Rustfri MGN9C Rail. This superior rail features MGN9C rails with medium-high custom preload for enhanced precision and speed. Experience a seamless setup with our New! Class H Rails, designed for a consistent and better out-of-the-box experience. Our rails come pre-lubed with EP2 for smooth, tight...

Voron StealthBurner LED Kit - Enhance Your 3D Printing

Voron StealthBurner LED Kit - Enhance Your 3D Printing 2

In stock

LEDs

Voron StealthBurner Fully Assembled LED Kit By Fysetc - Rainbow BARF

20620

kr71.20

Illuminate your 3D printing experience with the Voron StealthBurner Fully Assembled LED Kit by Fysetc. Designed to enhance visibility and precision, this kit is a must-have for every 3D printing enthusiast.Easy Installation: Arriving fully assembled, this kit is user-friendly, saving you time and effort.Superior Brightness: Equipped with high-quality...

Customers who bought this product also bought:

SUNON 3006 5v Axial Fan - 23.6dBA 9100RPM_3015

SUNON 3006 5v Axial Fan - 23.6dBA 9100RPM_3015 2

In stock

Fans

SUNON 3006 5v Axial Fan - 23.6dBA 9100RPM

34638

kr96.00

Keep your electronics cool and running smoothly with the SUNON 3006 5v Axial Fan. This compact, high-performance fan measures just 30*30*6mm, making it a perfect fit for a variety of applications. It operates on a DC24V voltage and uses only 0.72W of power, providing efficient cooling without draining your resources. With a speed of 9100RPM+- 15%, it...

Original Gates Belts (GATES-LL-2GT) - Price per meter_767

In stock

Belts

Original Gates Belts (GATES-LL-2GT) - Price per meter

42279

kr62.40

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM_2758

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM_2758 2

In stock

Fans

SUNON 5015 24v Blower Fan - 43.8dB 6000RPM

34586

kr111.20

Introducing the SUNON 5015 24v Blower Fan, a compact and powerful solution for your cooling needs. This high-performance fan measures just 50*50*15mm, making it an ideal fit for a variety of applications.Efficient Power: Operating at a DC24V voltage, it uses a maximum of 81mA current and 1.95W power, ensuring energy-efficient performance.High Speed: With...

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

In stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament

3DO PLA 2.0 Tough Steel Blue 1KG - High-Quality 3D Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Steel Blue

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

Omron G3NB-210B-1 DC5-24 Solid state relay (SSR)_3209

In stock

Relays

Omron G3NB-210B-1 DC5-24 Solid state relay (SSR)

28670

kr199.20

Input rated voltage: DC5～24V Applicable output load: 10 A at 24 to 220 VAC (at 40°C)

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM_1295

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM_1295 2

In stock

Bearings

GDSTIME 5015 24v Blower Fan - 34.6dBA 6000RPM

34193

kr55.20

Introducing the GDSTIME 5015 24v Blower Fan – a powerful, compact, and quiet cooling solution. This high-performance fan operates at a swift 6000 RPM, ensuring optimal cooling for your devices. Despite its impressive speed, it maintains a low noise level at 34.6dBA, enabling a peaceful work environment. Ball Bearing for smooth, long-lasting operation....

Out-of-Stock

Bed adhesives

DimaFix Pen

6273

kr87.20

Experience the ultimate convenience in 3D printing with the DimaFix Pen. This gas-free adhesive solution ensures a perfect grip on your print bed every time, eliminating the risk of warping. It's especially recommended for materials that are difficult to adhere, like ABS/ASA. Optimized for use with heatbed and high-temperature materials, performing best...

View

Original Gates Closed Loop (GATES-188-2GT) 6mm*188mm_764

Original Gates Closed Loop (GATES-188-2GT) 6mm*188mm_764 2

In stock

Belts

Original Gates Closed Loop (GATES-188-2GT) 6mm*188mm

42278

kr23.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.

4010 Blower P-Series Fan - High-Speed 9500rpm Cooling Solution

4010 Blower P-Series Fan - High-Speed 9500rpm Cooling Solution 2

In stock

Fans

4010 blower P-Series fan by HoneyBadger

HoneyBadger

kr55.20

Introducing the 4010 Blower P-Series Fan by HoneyBadger, designed for high-performance and reliability. This compact yet powerful fan operates at a stunning 9500 rpm ±10%, ensuring consistent and efficient air circulation. Powered by a 24v supply, it delivers an impressive airflow of ~3 cfm ±10%. The static pressure is yet to be determined, but rest...