-40%

Phaetus PH Volcano Copper Nozzle 1,75 mm_2798

Phaetus PH Volcano Copper Nozzle 1,75 mm_2798

Phaetus PH Volcano Copper Nozzle 1,75 mm

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best!

Highlights

High Temperature Performance
Low Pushing Force
Faster Extrusion Speed

Diameter

0.4mm
0.6mm
0.8mm
1.0mm
1.2mm

In stock

kr71.52 kr119.20 -40%

Product Details

Thread: V6 / M6
Filament Diameter: 1.75mm
Material: Plated Copper

Brand

Reference 4921

Viewed products

Voron Mini Neopixel LED Sequins with Teflon Wire

Voron Mini Neopixel LED Sequins with Teflon Wire 2

In stock

LEDs

Voron Mini SB Sequins Neopixel 4pcs WS2812 leds + 1M 26AWG Teflon wire

Light up your world with the Voron Mini SB Sequins Neopixel! This compact and versatile lighting solution features 4 high-quality WS2812 LEDs that offer vibrant, customizable colors. Each set comes with a 1M 26AWG Teflon wire, renowned for its durability and heat resistance. Customizable Colors: The WS2812 LEDs offer a full spectrum of vibrant...

High Wattage Cartridge Heaters - 24v & 48v

High Wattage Cartridge Heaters - 24v & 48v 2

Product available with different options

Heater

High Wattage Cartridge Heaters - 24v & 48v

LUKES LABORATORY

Cartridge Heaters Sizes: 6mm Diameter, 20mm and 47mm length Wattage: 50, 80, 100, 120, 140w Voltages: 24, 48V Casing: Rated for 550c Continuous Usage, Wires rated for up to 300c Chamber. Gauge: 18ga Wire Length: 150mm

View

Bondtech Volcano CHT® Coated Brass Nozzle_2950

Bondtech Volcano CHT® Coated Brass Nozzle_2950 2

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

16 other products in the same category:

Phaetus M6 / V6 Tungsten Carbide Nozzle_2734

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

E3D RapidChange Revo™ Brass Nozzle_3135

E3D RapidChange Revo™ Brass Nozzle_3135 2

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Bondtech CHT® Coated Brass Nozzle_1801

Bondtech CHT® Coated Brass Nozzle_1801 2

Product available with different options

Nozzle

Bondtech CHT® Coated Brass Nozzle

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

View

Bondtech CHT® MK8 Coated Brass Nozzle_1798

Bondtech CHT® MK8 Coated Brass Nozzle_1798 2

In stock

Nozzle

Bondtech CHT® MK8 Coated Brass Nozzle

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench

Phaetus PH Volcano Hardened Steel Nozzle 1,75 mm_2787

-40%

In stock

Accessories

Phaetus PH Volcano Hardened Steel Nozzle 1,75 mm

kr84.00 kr140.00

Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole Inner hole...

Bondtech Volcano CHT® Coated Brass Nozzle_2950

Bondtech Volcano CHT® Coated Brass Nozzle_2950 2

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

Phaetus PH Volcano Brass Nozzle 1,75 mm_2802

In stock

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Phaetus PS M6 Copper Nozzle 1,75 mm_2777

Phaetus PS M6 Copper Nozzle 1,75 mm_2777 2

-40%

In stock

Nozzle

Phaetus PS M6 Copper Nozzle 1,75 mm

kr47.04 kr78.40

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow 2

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision 2

In stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

E3D Volcano ObXidian Nozzle: High-Performance Printing

E3D Volcano ObXidian Nozzle: High-Performance Printing 2

-30%

In stock

Nozzle

E3D Volcano ObXidian Nozzle

kr229.04 kr327.20

ObXidian is E3D's latest abrasive Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles. Material:...

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

Phaetus MK8 Tungsten Carbide Nozzle_2738

Remote storage 2-3 days

Nozzle

Phaetus MK8 Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

Phaetus Volcano Compatible Tungsten Carbide Nozzle_2742

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

E3D RapidChange Revo High Flow Nozzle for 3D Printing

E3D RapidChange Revo High Flow Nozzle for 3D Printing 2

In stock

Nozzle

E3D RapidChange Revo™ High Flow Nozzle

High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials. Maximum temperature: 300°C Filament diameter:...

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm_2782

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm_2782 2

-40%

In stock

Nozzle

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm

kr50.40 kr84.00

Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole Inner hole...

Customers who bought this product also bought:

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

ATC Semitec 104GT-2 Thermistor - 1 Meter_342 2

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and...

Capricorn Bowden PTFE_2570

Capricorn Bowden PTFE_2570 2

In stock

Extruder spare parts

Capricorn Bowden PTFE

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

Phaetus Volcano Compatible Tungsten Carbide Nozzle_2742

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

LGX Steel Drive Train Upgrade for Bondtech Extruders

LGX Steel Drive Train Upgrade for Bondtech Extruders 2

Out-of-Stock

Extruder spare parts

LGX Steel Drive Train Upgrade Set

Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder : LGX LGX Lite Recommended to feed Engineering grade thermoplastics. To use our LGX extruders above our default recommendations: with thicker mounting plates; at higher environment temperatures; at...

View

PTFE Teflon 2*4mm_352

PTFE Teflon 2*4mm_352 2

In stock

Extruder spare parts

PTFE Teflon 2*4mm

Filament cleaner for 1.75mm filament (round)_2616

Filament cleaner for 1.75mm filament (round)_2616 2

In stock

Other Accessories

Filament cleaner for 1.75mm filament (round)

Keep your 3D printer performing at its best with our Filament Renser til 1.75mm Filament (Rund). This essential tool ensures smooth, consistent printing by effectively removing any dust or debris from your filament before it enters the extruder. Highly Effective: The round design offers comprehensive cleaning, ensuring your filament is free from any...

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth_1087

In stock

Pulleys/Idlers/Gears

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth

Introducing the Idler 7mm 16/20T (Bore/ID 3mm) - med/uden tænder, a high-quality idler boasting minimal tolerance of just 0.4um. This ensures you avoid the micro-slippage commonly experienced with cheaper idlers. Exceptional Quality: Crafted to perfection, this idler offers superior performance and longevity.Low Tolerance: With a minimal tolerance of...

DimaFix Spray_711

Out-of-Stock

Bed adhesives

DimaFix Spray

Experience the perfect adhesion every time with DimaFix Spray. Engineered for materials that are challenging to adhere, like ABS/ASA, it's an essential tool for 3D printing. Excellent Adhesion: Say goodbye to warping. DimaFix ensures a strong bond between your print and the bed, especially with high-temperature materials and a heatbed over 70C.Easy...

View

Customers who bought this product also bought:

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing

BTT Smart Filament Sensor SFS V2.0: Upgrade Your 3D Printing 2

In stock

Helper Boards

BTT Smart Filament Sensor SFS V2.0

Introducing the BTT Smart Filament Sensor SFS V2.0, an innovative solution for your 3D printing needs. This advanced sensor ensures optimal performance by accurately monitoring filament consumption in real-time. Smart Detection: The sensor can detect filament breakage, run-out, and even blockage for a seamless 3D printing experience.High Compatibility: It...

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

ATC Semitec 104GT-2 Thermistor - 1 Meter_342 2

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and...

Capricorn Bowden PTFE_2570

Capricorn Bowden PTFE_2570 2

In stock

Extruder spare parts

Capricorn Bowden PTFE

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

DimaFix Spray_711

Out-of-Stock

Bed adhesives

DimaFix Spray

Experience the perfect adhesion every time with DimaFix Spray. Engineered for materials that are challenging to adhere, like ABS/ASA, it's an essential tool for 3D printing. Excellent Adhesion: Say goodbye to warping. DimaFix ensures a strong bond between your print and the bed, especially with high-temperature materials and a heatbed over 70C.Easy...

View

XOL Toolhead Rev for Voron Printers - Top Performance

XOL Toolhead Rev for Voron Printers - Top Performance 2

Out-of-Stock

Hotend spare parts

XOL (newest rev) Toolhead by Armchair Engineering 12k

One of the lightest, highest performing tool heads available for the Voron printer family.Now shipping the newest revision of XOL including bones! Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOM Cube. After finding that...

View

Phaetus Volcano Compatible Tungsten Carbide Nozzle_2742

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

PTFE Teflon 2*4mm_352

PTFE Teflon 2*4mm_352 2

In stock

Extruder spare parts

PTFE Teflon 2*4mm

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration 2

In stock

Other Accessories

Nevermore Scorch S 850ml: Revolutionize Your 3D Printing Air Filtration

Standard (750 ml, 0.66 kg) XL (2300 ml, 2 kg) Experience unmatched efficiency with the Nevermore Scorch S 850ml, a superior air filtration solution for 3D printers. Specially designed for high-temperature environments, Scorch surpasses traditional carbon filters. Its innovative formula, a blend of zeolite and potassium permanganate, effectively captures...

DimaFix Pen_713

Out-of-Stock

Bed adhesives

DimaFix Pen

Experience the ultimate convenience in 3D printing with the DimaFix Pen. This gas-free adhesive solution ensures a perfect grip on your print bed every time, eliminating the risk of warping. It's especially recommended for materials that are difficult to adhere, like ABS/ASA. Optimized for use with heatbed and high-temperature materials, performing best...

View

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

4mm bowden collet clip

Product added to wishlist