PTFE Teflon 2*4mm

Colour

White
Transperant
Blue

Length

1 Meter
2 Meters

In stock

kr40.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Reference 16451

16 other products in the same category:

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders 2

In stock

Extruder spare parts

OEM Reverse Integrated Drive Gear Assembly

Bondtech

kr119.20

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

kr9.60

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

Bambu X1/P1P Extrusion Gear Kit: CNC Nanocoated Upgrade

In stock

Extruder spare parts

Improved Bambu X1/P1P CNC Nanocoated Extrusion Gear Kit

kr199.20

Elevate your 3D printing experience with our Improved Nano Coating Extrusion Gear Kit designed for Bambu 3D Printers. This meticulously engineered kit enhances your printer's extrusion system performance. Key Features: Integrated Shaft Design: Ensures superior gear concentricity, reducing eccentric rotation during assembly for even filament transport....

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

Out-of-Stock

Extruder spare parts

OEM IDGA Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Compatible only with the following extruders: Voron ClockWork 2 (CW2)

View

50-Tooth CNC Hollow POM Gear - Precision & Strength

50-Tooth CNC Hollow POM Gear - Precision & Strength 2

In stock

Extruder spare parts

50 Tooth Pom Gear

41729

kr72.00

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments 2

In stock

Extruder spare parts

BIQU Panda Claw Hardened Gear Set for Bambu Lab for X1/P1

BIQU

kr159.00

Premium gear set with RNC nano-coating and hardened steel - designed for demanding filaments! Hardened steel with gold nano-coating for extreme wear resistance Self-lubricating brass spur gear with optimized tooth shape CNC-machined idler arm in AL6061 T6 aluminum Includes MoS2 lubricating grease for silk-smooth extrusion The optimized design...

PTFE Adapter for Bambu / AMS / K1 Series – Silver

PTFE Adapter for Bambu / AMS / K1 Series – Silver 2

In stock

Accessory

Filament Hub PTFE Adapter – Bambu X1 / P1 / A1 / AMS / AD5M / K1 Series

kr15.20

Filament Hub PTFE Adapter – Expansion port for smooth material feeding on Bambu and Creality printers. This lightweight, durable adapter is made of aluminum alloy and plastic, designed for a precise fit with Bambu Lab and K1 series printers. Compatible With: Bambu Lab X1 / P1 / A1 / A1 mini / AMS Creality AD5M / AD5M Pro / K1 Series...

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

Bowden Tube Buckle for 4mm PTFE tube

kr4.00

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

kr119.20

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr12.00

Thumbscrew replacement for Bondtech extruder.

LDO Orbiter 2 Filament Sensor Kit_2944 2

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

kr119.20

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

In stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

OEM Reverse Set for HextrudORT - Ultimate Feeding System

In stock

Extruder spare parts

OEM Reverse Set for HextrudORT

Bondtech

41486

kr279.20

Original Bondtech OEM set of parts to use on the HextrudORT from the HevORT project. Includes a set with the Hardened Steel R.I.D.G.A. V2 and BMG original 1.75mm secondary Drive Gear. Precision cnc-machined. Sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with...

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr7.20

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

Customers who bought this product also bought:

VORON V2.4 Anti-Vibration Rubber Landing Mat Feet Set

VORON V2.4 Anti-Vibration Rubber Landing Mat Feet Set 2

In stock

Frame accessories

VORON V2.4 4pcs Anti vibration Rubber Landing Mat Feet

47728

kr39.20

In stock

Heat inserts

LDO Heat Insert tool M3

LDO

6338

kr39.20

Introducing the LDO Heat Insert Værktøj M3, your ultimate tool for inserting heat-set inserts in M3 size. This tool conveniently attaches to a compatible soldering iron, making your work easier and more efficient.Efficient: Designed for precise and quick insertion of heat-set inserts.Compatible: Easily attaches to your existing soldering iron.Quality:...

In stock

Endstops / switches

Voron Mechanical endstop XY

38587

kr63.20

Introducing the Voron Mekanisk Endstop XY, a top-tier mechanical limit switch designed for precision and reliability in your 3D printing projects. This high-quality endstop ensures accurate positioning, offering a seamless printing experience. Key Features:Precision: Guarantees exact positioning to avoid printing errors.Reliability: Made with robust...

In stock

Spare parts for print bed

Glass Hotbed Clip 1stk

33245

kr4.80

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

In stock

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

1915

kr9.60

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

EBB SB2209 CAN Kit for Voron StealthBurner - Enhance 3D Printing

EBB SB2209 CAN Kit for Voron StealthBurner - Enhance 3D Printing 2

In stock

CAN BUS Boards

EBB SB2209 CAN V1.0 for Voron StealthBurner

kr279.20

Introducing the EBB SB2209 CAN V1.0 for Voron StealthBurner - your ultimate solution for achieving the highest quality 3D printing. This kit is designed to provide smooth, efficient, and reliable operation of your Voron StealthBurner. EBB SB2209 includes: EBB 2209 CAN x1 - the heart of the system, ensuring accurate, high-speed performance. EBB SB0000...

Goliath Hotend by Mellow - Elevate 3D Printing

Goliath Hotend by Mellow - Elevate 3D Printing 2

In stock

Complete hotends

Goliath Hotend (AKA LSD) From VzBoT By Mellow

10744

kr1,196.00

Introducing the Goliath Hotend (AKA LSD) by VzBoT from Mellow, the ultimate tool for 3D printing enthusiasts. This innovative hotend boasts a choice of air-cooled or water-cooled aluminum heatsink for optimal performance. Its unique bi-material copper and zirconia heatbreak ensures efficient heat transfer. With ceramic spacers and a nickle-plated copper...

Idler 2GT 20T (Bore/ID 5mm) - with/without teeth_1093

Idler 2GT 20T (Bore/ID 5mm) - with/without teeth_1093 2

In stock

Pulleys/Idlers/Gears

Idler 2GT 20T (Bore/ID 5mm) - with/without teeth

42317

kr23.20

Experience the precision and quality of our Idler 2GT 20T pulley with a 5mm bore. Designed and crafted with original Gates tools, this pulley adheres strictly to Gates' high standards and specifications. Superior Quality: Our pulley offers a minimal tolerance of just 0.4um, ensuring you avoid micro-slippage commonly seen with cheaper pulleys. Flexible...

Customers who bought this product also bought:

3DO PLA 2.0 Tough Blue 1KG - Premium Matte Finish

3DO PLA 2.0 Tough Blue 1KG - Premium Matte Finish 2

Out-of-Stock

PLA

3DO PLA 2.0 Tough 1KG - Blue

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

View

In stock

Complete hotends

Phaetus Dragonfly BMO

Phaetus

1042

kr359.20

Upgrade your 3D printing capabilities with the Phaetus Dragonfly BMO, a superior alternative to the standard V6 hotend. This model supports temperatures up to 500°, enabling you to work with a wider range of materials. With its consistent flow rate and improved heatbreak precision, you'll enjoy smoother prints with fewer imperfections. High Temperature...

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

kr183.20

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_1764

In stock

Lubrication

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

6420

kr47.20

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

In stock

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

MOONS' NEMA14 High-Temperature Motor for 3D Printers

MOONS' NEMA14 High-Temperature Motor for 3D Printers 2

In stock

Stepper Motors

Moons NEMA14 36mm 10T - High Temperature

kr151.20

Introducing the MOONS' NEMA14 36mm 10T High-Temperature Motor - the first of its kind designed specifically for 3D printers. This motor is engineered to operate efficiently up to 130 degrees Celsius and maintains an impressive 80% energy efficiency even at 180 degrees Celsius. Its unique bearing design, utilized as the flange surface, maximizes stator...

In stock

Endstops / switches

Micro switch 12.7x5.8x6.65mm

38368

kr6.00

Introducing the Micro Switch 12.7x5.8x6.65mm, a compact, high-performing gadget designed for optimal efficiency. This 3-pole micro switch is engineered to handle a power of 3A/125V, ensuring a reliable and safe operation.Compact Design: With dimensions of just 12.7x5.8x6.65mm, this micro switch is perfect for applications where space is at a premium.High...

In stock

Silicon socks

Rapido HF Silicone Sock

Phaetus

14582

kr39.20

Protects and insulates your Rapido heating block and nozzle!

High-Quality AzureFilm PETG Black 1Kg for 3D Printing

Out-of-Stock

PETG

AzureFilm PETG Black 1Kg

AzureFilm

FG171-9005

kr119.20

Made in EU, high quality PETG, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 220–240°C Heated bed: Recommended 60-80°C Print speed: 50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

View

Vibration damper / Shock absorber Nema17_2813

In stock

Stepper Motors

Vibration damper / Shock absorber Nema17

35600

kr19.20

Vibrationsdæmper til Nema17 is your ultimate solution to reduce motor vibrations. Designed specifically for Nema17 stepper motors, these dampers work efficiently to minimize vibration and noise, enhancing the performance of your motors. Key features:Reduces Motor Vibrations: Effectively minimizes the vibrations of Nema17 motors, ensuring smooth...