M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_16

M6 Pneumatic Connector for 4mm PFTE tube

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

In stock

kr9.60

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Reference 199

16 other products in the same category:

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

kr12.00

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

LGX Steel Drive Train Upgrade for Bondtech Extruders

LGX Steel Drive Train Upgrade for Bondtech Extruders 2

Out-of-Stock

Extruder spare parts

LGX Steel Drive Train Upgrade Set

kr263.20

Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder : LGX LGX Lite Recommended to feed Engineering grade thermoplastics. To use our LGX extruders above our default recommendations: with thicker mounting plates; at higher environment temperatures; at...

View

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech

41487

kr204.00

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

kr119.20

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda Jetpack Cooling Cover for Bambu Lab Printers

BIQU

kr284.00

Upgrade your Bambu Lab printer with this innovative MJF nylon cooling cover Premium lightweight design with enhanced airflow Specially designed air outlet for optimal nozzle cooling Reduces deformation in overhangs and bridges Crafted from high-quality MJF nylon with excellent temperature...

50-Tooth CNC Hollow POM Gear - Precision & Strength

50-Tooth CNC Hollow POM Gear - Precision & Strength 2

In stock

Extruder spare parts

50 Tooth Pom Gear

41729

kr72.00

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers 2

In stock

Complete extruders

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO

kr439.20

The Jabberwocky Basic Kit delivers a robust, easy-to-maintain toolhead tailored for multi-material printers.Equipped with Bondtech drive gears, a NEMA14 motor, tool-free hinged extruder, and efficient cooling fans, it ensures reliable filament handling and clean swaps.Includes integrated cutter, filament sensor, and status LEDs—an excellent foundation for...

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

kr7.20

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

In stock

Extruder spare parts

Extruder Spring Extra Hard

20431

kr4.80

Length 20mmThread diameter 1.2mm

Out-of-Stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

kr12.00

Thumbscrew replacement for Bondtech extruder.

View

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 8.0

Bondtech

41488

kr204.00

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments

BIQU Panda Claw | Hardened Gear Set for Abrasive Filaments 2

Out-of-Stock

Extruder spare parts

BIQU Panda Claw Hardened Gear Set for Bambu Lab for X1/P1

BIQU

kr159.00

Premium gear set with RNC nano-coating and hardened steel - designed for demanding filaments! Hardened steel with gold nano-coating for extreme wear resistance Self-lubricating brass spur gear with optimized tooth shape CNC-machined idler arm in AL6061 T6 aluminum Includes MoS2 lubricating grease for silk-smooth extrusion The optimized design...

View

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

Out-of-Stock

Extruder spare parts

OEM IDGA Set

kr119.20

View

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

In stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

kr12.00

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda CNC Extruder Housing for Bambu Lab

BIQU

kr284.00

Premium lightweight extruder housing in aerospace-grade aluminum - 20% lighter than standard housing! CNC-milled AI6061T6 aluminum with open frame structure Optimized cooling design keeps motor stable during extended prints Premium anodized finish for durability and corrosion protection Drop-in upgrade...

Customers who bought this product also bought:

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

LDO NEMA 14 VORON LDO-35STH48-1684AH(VRN)_2656

In stock

Stepper Motors

LDO NEMA 17 MOTOR SUPER-SLIM LDO-42STH20-1004AS1

LDO

35558

kr151.20

Meet the LDO NEMA 17 Motor Super-Slim LDO-42STH20-1004AS1, a powerful and compact solution for your automation needs. With its NEMA 17 size and 20mm slim body, this motor is perfect for tight spaces without sacrificing performance. It boasts a 1.8° step angle and 200 steps per revolution for precise motion control. Running on 1.0 Amp, it delivers a robust...

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration 2

In stock

Other Accessories

Nevermore StealthMax Filter Kit (Hardware Only)

kr556.00

Advanced 3D printer air filtration kit featuring: Raspberry Pi Pico W WiFi module HEPA filter system (2.5 micron filtration) 24V to 12V step-down converter Pre-soldered electronics Plug-and-play installation Compatible with 4mm activated carbon (not included) Print files: github.com/nevermore3d/StealthMax

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

In stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr31.20

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort. Compact and...

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM_1298

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM_1298 2

In stock

Fans

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM

34192

kr55.20

Experience superior cooling with the GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM. This high-performance fan operates at a swift 6000 RPM, delivering an impressive air flow of 15.3 CFM for efficient cooling. Despite its power, it maintains a low noise level of 34.6dBA, ensuring a quiet operation.Ball Bearing: Guarantees a smooth and long-lasting...

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_2766

In stock

Lubrication

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

6588

kr95.20

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

In stock

Bed adhesives

DimaFix Pen

6273

kr87.20

Experience the ultimate convenience in 3D printing with the DimaFix Pen. This gas-free adhesive solution ensures a perfect grip on your print bed every time, eliminating the risk of warping. It's especially recommended for materials that are difficult to adhere, like ABS/ASA. Optimized for use with heatbed and high-temperature materials, performing best...

In stock

Tools

Torque key for nozzle changes

6430

kr191.20

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer.Medfølger 7mm & 8mm socket, der passer...

Customers who bought this product also bought:

PG7 Cable Gland with Strain Relief - Protect Your Cables

PG7 Cable Gland with Strain Relief - Protect Your Cables 2

In stock

Electronics

PG7 Cable gland with strain relief - 1pcs

kr12.00

Secure your cables efficiently with our PG7 Kabelforskruning med trækaflastning - 1stk. This high-quality cable gland is designed to provide superior strain relief, ensuring your cables remain intact and functional. Durable: Made from robust materials, it guarantees long-lasting performance.Easy Installation: Its simple design allows for effortless setup...

M10 Pneumatic Connector for 4mm PFTE tube_27

In stock

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

1914

kr9.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

AzureFilm PETG White 1Kg - High-Quality 3D Printing Filament

In stock

PETG

AzureFilm PETG White 1Kg

AzureFilm

FG171-9010

kr119.20

Made in EU, high quality PETG, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 220–240°C Heated bed: Recommended 60-80°C Print speed: 50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

Filament cleaner for 1.75mm filament (round)_2616

Filament cleaner for 1.75mm filament (round)_2616 2

In stock

Other Accessories

Filament cleaner for 1.75mm filament (round)

6549

kr8.00

Keep your 3D printer performing at its best with our Filament Renser til 1.75mm Filament (Rund). This essential tool ensures smooth, consistent printing by effectively removing any dust or debris from your filament before it enters the extruder. Highly Effective: The round design offers comprehensive cleaning, ensuring your filament is free from any...

In stock

Wiring

WAGO 5x 0.08 - 4.0 mm

kr4.40

Upgrade your electrical connections with the WAGO 5x 0.08 - 4.0 mm! This compact and versatile connector is perfect for a variety of wiring tasks, ensuring safe and reliable connections every time. Universal Compatibility: With a size range of 0.08 - 4.0 mm, it can accommodate a wide range of wire sizes.Easy to Use: Its user-friendly design allows for...

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Anthracite

3DO

50497

kr143.20

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_1764

In stock

Lubrication

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

6420

kr47.20

In stock

Helper Boards

ADXL345

25399

kr28.80

Experience precise motion tracking with the compact and low-power ADXL345 accelerometer. This small yet powerful device offers 13-bit resolution and detects motion in three axes, with a maximum range of ± 16 G and sensitivity down to 0.04 G. The ADXL345 is equipped with two interrupt outputs, enabling additional features such as activity/inactivity...

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

In stock

Tools

Cleaning brush soft brass - for nozzles / hotend

637

kr15.20

Keep your 3D printer running smoothly with the Rensebørste blød messing - a versatile cleaning brush designed specifically for hotends and nozzles. This tool is perfect for removing dirt and burnt plastic, ensuring optimal performance of your device.Effective Cleaning: Easily removes dirt, residue, and burnt plastic, enhancing the longevity of your 3D...

In stock

Spare parts for print bed

Ends Glass Clip 1stk

33248

kr4.80