Bowden Tube Buckle

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

In stock

€0.53

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Reference 198

16 other products in the same category:

LDO Orbiter 2 Filament Sensor Kit_2944 2

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

€15.89

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab

BIQU Panda CNC Housing | Lightweight Upgrade for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda CNC Extruder Housing for Bambu Lab

BIQU

€37.86

Premium lightweight extruder housing in aerospace-grade aluminum - 20% lighter than standard housing! CNC-milled AI6061T6 aluminum with open frame structure Optimized cooling design keeps motor stable during extended prints Premium anodized finish for durability and corrosion protection Drop-in upgrade...

Bambu X1/P1P Extrusion Gear Kit: CNC Nanocoated Upgrade

In stock

Extruder spare parts

Improved Bambu X1/P1P CNC Nanocoated Extrusion Gear Kit

€26.55

Elevate your 3D printing experience with our Improved Nano Coating Extrusion Gear Kit designed for Bambu 3D Printers. This meticulously engineered kit enhances your printer's extrusion system performance. Key Features: Integrated Shaft Design: Ensures superior gear concentricity, reducing eccentric rotation during assembly for even filament transport....

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

€15.89

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

50-Tooth CNC Hollow POM Gear - Precision & Strength

50-Tooth CNC Hollow POM Gear - Precision & Strength 2

In stock

Extruder spare parts

50 Tooth Pom Gear

41729

€9.60

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today

Galileo 2 Extruder Kit: Upgrade Your 3D Printer Today 2

Out-of-Stock

Extruder spare parts

Galileo 2 – Extruder Kit by LDO

€52.15

Galileo 2 StandaloneDrop-in replacement of Orbiter 2.0 or Sherpa MiniSTL / Guide: https://github.com/JaredC01/Galileo2 Galileo 2 Stealthburnerdrop-in replacement of the CW2 extruder with Stealthburner toolheadSTL / Guide: https://github.com/JaredC01/Galileo2 Kit Includes: LDO-36STH20-1004AHG(9T) Stepper Motor, 1 piece Ring Gear Housing MFJ, 1...

View

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

4mm bowden collet clip

€0.53

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

In stock

Extruder spare parts

Ballbearing 4x8x3.0

Bondtech

€1.60

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

€1.60

Thumbscrew replacement for Bondtech extruder.

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders 2

In stock

Extruder spare parts

OEM Reverse Integrated Drive Gear Assembly

Bondtech

€15.89

Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED). Compatible only with : new HextrudORT extruder

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab

BIQU Panda Jetpack | Enhanced Cooling for Bambu Lab 2

In stock

Extruder spare parts

BIQU Panda Jetpack Cooling Cover for Bambu Lab Printers

BIQU

€37.86

Upgrade your Bambu Lab printer with this innovative MJF nylon cooling cover Premium lightweight design with enhanced airflow Specially designed air outlet for optimal nozzle cooling Reduces deformation in overhangs and bridges Crafted from high-quality MJF nylon with excellent temperature...

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

€24.42

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

In stock

Extruder spare parts

PTFE Teflon 3*4mm

€8.42

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

€1.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

Out-of-Stock

Extruder spare parts

OEM IDGA Set

€15.89

View

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

€0.96

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

Customers who bought this product also bought:

SUNON 5015 12v Blower Fan - 42.2dBA 6000RPM_2760

SUNON 5015 12v Blower Fan - 42.2dBA 6000RPM_2760 2

In stock

Fans

SUNON 5015 12v Blower Fan - 42.2dBA 6000RPM

34538

€13.76

Experience superior cooling performance with the SUNON 5015 12v Blower Fan. This compact fan, measuring just 50*50*15mm, packs a punch with a speed of 6000RPM±10%, ensuring your devices stay cool under pressure. Despite its power, it operates at a noise level of just 42.2dBA, making it a quiet solution for your cooling needs. Compact Size: Easily fits...

In stock

Helper Boards

ADXL345

25399

€3.84

Experience precise motion tracking with the compact and low-power ADXL345 accelerometer. This small yet powerful device offers 13-bit resolution and detects motion in three axes, with a maximum range of ± 16 G and sensitivity down to 0.04 G. The ADXL345 is equipped with two interrupt outputs, enabling additional features such as activity/inactivity...

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

€1.28

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

In stock

Extruder spare parts

BMG IDGA Retro-fit Set

€15.89

Product available with different options

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Phaetus

4591

€7.46

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

View

LDO Orbiter V2.5 - Premium Direct Drive Extruder System

LDO Orbiter V2.5 - Premium Direct Drive Extruder System 2

Out-of-Stock

Complete extruders

LDO Orbiter V2.5 Direct Drive Extruder

LDO

€52.79

View

In stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

€15.89

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

3DO ASA 1KG Antracit: UV-Resistant Copolymer for Industrial Use

3DO ASA 1KG Antracit: UV-Resistant Copolymer for Industrial Use 2

In stock

ASA

3DO ASA 1KG - Antracit

3DO

52581

€26.55

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

Customers who bought this product also bought:

High Temp Silicone Sealant Black 80g - Resists -65°C to +380°C

Out-of-Stock

Other Accessories

High Temperature Silicone Sealant - Black 80g

€4.16

High-temperature resistant sealant, resistant to high (+380°C) and low temperatures (-65°C). Elastic, fast curing sealant that forms lasting, not shrinking and UV-resistant fi lling compound. Seals and glues most surfaces such as glass, ceramics, aluminum and metal perfectly. curing time: 3 mm/24 h tooling time: 10-20 min operating temperature from...

View

In stock

Stepper Motors

NEMA17 Heatsink (adhesive)

35380

€1.71

Keep your NEMA17 stepper motor running cool and efficient with our NEMA17 Heatsink (selvklæbende). This adhesive heat sink is designed to fit perfectly on NEMA17 size stepper motors, providing optimal heat dissipation to extend the life of your motor and improve its performance. Size: With a compact size of 40x40x11 mm, it easily fits on your motor...

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth_1087

In stock

Pulleys/Idlers/Gears

Idler 7mm 16/20T (Bore/ID 3mm) - with/without teeth

42316

€3.09

Introducing the Idler 7mm 16/20T (Bore/ID 3mm) - med/uden tænder, a high-quality idler boasting minimal tolerance of just 0.4um. This ensures you avoid the micro-slippage commonly experienced with cheaper idlers. Exceptional Quality: Crafted to perfection, this idler offers superior performance and longevity.Low Tolerance: With a minimal tolerance of...

In stock

Helper Boards

ADXL345

25399

€3.84

Product available with different options

Complete hotends

Phaetus Dragon Voron

Phaetus

1067

€78.81

Experience the power of the Phaetus Dragon Voron, a high-temperature hotend authorized by the Voron Team. Designed to fit seamlessly onto their printhead, this model is capable of handling temperatures up to 500° without any heat creep, thanks to its specially designed heatbreak. Two Heatbreak Options: Choose between the standard flow (SF) and high flow...

View

Out-of-Stock

Complete extruders

LDO Orbiter V2.5 Direct Drive Extruder

LDO

€52.79

View

BIGTREETECH Octopus Pro V1.0(F429)_1365 2

In stock

Mainboards

BIGTREETECH Octopus Pro V1.0 (F446)

BIQU

25357

€52.79

Introducing the BIGTREETECH Octopus Pro V1.0 (F446), a cutting-edge 3D printer motherboard packed with powerful features. With an ARM Cortex-M4 series processor and the F446 chip, it supports 8 axes and is fully compatible with RepRap firmware.Size: Compact design with a size of 160x100mm and mounting hole distance of 150x90mm.Power Input: Operates on a...

VORON V2.4 Anti-Vibration Rubber Landing Mat Feet Set

VORON V2.4 Anti-Vibration Rubber Landing Mat Feet Set 2

In stock

Frame accessories

VORON V2.4 4pcs Anti vibration Rubber Landing Mat Feet

47728

€5.23

In stock

Complete hotends

Phaetus Dragonfly BMO

Phaetus

1042

€47.88

Upgrade your 3D printing capabilities with the Phaetus Dragonfly BMO, a superior alternative to the standard V6 hotend. This model supports temperatures up to 500°, enabling you to work with a wider range of materials. With its consistent flow rate and improved heatbreak precision, you'll enjoy smoother prints with fewer imperfections. High Temperature...

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM_1298

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM_1298 2

In stock

Fans

GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM

34192

€7.36

Experience superior cooling with the GDSTIME 5015 12v Blower Fan - 34.6dBA 6000RPM. This high-performance fan operates at a swift 6000 RPM, delivering an impressive air flow of 15.3 CFM for efficient cooling. Despite its power, it maintains a low noise level of 34.6dBA, ensuring a quiet operation.Ball Bearing: Guarantees a smooth and long-lasting...