Bowden Tube Buckle for 6.35mm PTFE tube

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

In stock

€0.53

Subscribe To When In Stock

You have successfully subscribed to this product

Closed

Closed Jan 31 – Feb 3 due to relocation. Back on Feb 4.

Product Details

Reference 198

16 other products in the same category:

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing

OEM IDGA Set for Bondtech BMG - Enhance Your 3D Printing 2

In stock

Extruder spare parts

OEM IDGA Set

€15.89

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Compatible only with the following extruders: Voron ClockWork 2 (CW2)

In stock

Extruder spare parts

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech

41487

€27.19

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

Bambu X1/P1P Extrusion Gear Kit: CNC Nanocoated Upgrade

Out-of-Stock

Extruder spare parts

Improved Bambu X1/P1P CNC Nanocoated Extrusion Gear Kit

€26.55

Elevate your 3D printing experience with our Improved Nano Coating Extrusion Gear Kit designed for Bambu 3D Printers. This meticulously engineered kit enhances your printer's extrusion system performance. Key Features: Integrated Shaft Design: Ensures superior gear concentricity, reducing eccentric rotation during assembly for even filament transport....

View

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

In stock

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

1915

€1.28

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers 2

In stock

Complete extruders

LDO Jabberwocky Toolhead Basic Kit – Toolhead for Filament Changers

LDO

€58.55

The Jabberwocky Basic Kit delivers a robust, easy-to-maintain toolhead tailored for multi-material printers.Equipped with Bondtech drive gears, a NEMA14 motor, tool-free hinged extruder, and efficient cooling fans, it ensures reliable filament handling and clean swaps.Includes integrated cutter, filament sensor, and status LEDs—an excellent foundation for...

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

Out-of-Stock

Extruder spare parts

BMG Drive Gears IDGA Kit

€31.89

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

View

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34 2

In stock

Extruder spare parts

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

1913

€1.28

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

BigTreeTech Panda Claw Hardened Gear Set – For Bambu Lab A1 / A1 Mini

BigTreeTech Panda Claw Hardened Gear Set – For Bambu Lab A1 / A1 Mini 2

In stock

Extruder spare parts

BigTreeTech Panda Claw Hardened Gear Set – For Bambu Lab A1 / A1 Mini

€20.15

Upgrade your A1 or A1 Mini with the BigTreeTech Panda Claw Hardened Gear Set, engineered for smoother, more durable filament delivery. Featuring RNC nano-coated hardened steel gears and a lightweight CNC-machined aluminum idler arm, this kit enhances precision, stability, and wear resistance — even when printing abrasive filaments. The five-spoke...

DLC Extruder Gear For Creality K1/K1C/K1 Max

In stock

Extruder spare parts

DLC Extruder Gear For Creality K1/K1C/K1 Max

€16.96

High-precision CNC machined extruder gear with DLC coating, made from premium mold steel with 62-65 HRC hardness. Specifically designed for Creality K1, K1C, and K1 Max.Features razor-sharp extruding teeth for optimal filament grip and enhanced printing quality. Perfect for carbon fiber materials with superior wear and corrosion resistance.

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

€5.33

In stock

Extruder spare parts

Bondtech Thumbscrew Assembly

Bondtech

20687

€1.60

Thumbscrew replacement for Bondtech extruder.

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

€0.96

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

Upgrade Your LGX Lite with the V2 Upgrade Set

Upgrade Your LGX Lite with the V2 Upgrade Set 2

Out-of-Stock

Extruder spare parts

LGX Lite to LGX Lite V2 Upgrade Set

Bondtech

€24.42

Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. Make your LGX Lite more robust and stable.

View

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

In stock

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

1916

€1.60

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

High-Quality 4mm Bowden Collet Clip for 3D Printers

In stock

Extruder spare parts

Bowden Tube Buckle for 4mm PTFE tube

€0.53

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

In stock

Extruder spare parts

M6 Pneumatic Connector for 4mm PFTE tube

199

€1.28

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

Customers who bought this product also bought:

3DO ASA 1KG - High-Quality Grey Filament

3DO ASA 1KG - High-Quality Grey Filament 2

Out-of-Stock

ASA

3DO ASA 1KG - Grey

3DO

52580

€26.55

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

View

In stock

Extruder spare parts

PTFE Teflon 2*4mm

1692

€5.33

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration

Nevermore StealthMax Air Filter Kit | 3D Printer VOC & Particle Filtration 2

In stock

Other Accessories

Nevermore StealthMax Filter Kit (Hardware Only)

€74.11

Advanced 3D printer air filtration kit featuring: Raspberry Pi Pico W WiFi module HEPA filter system (2.5 micron filtration) 24V to 12V step-down converter Pre-soldered electronics Plug-and-play installation Compatible with 4mm activated carbon (not included) Print files: github.com/nevermore3d/StealthMax

In stock

Relays

Alpha Therm Thermal Fuse - SK150

18632

€5.23

Thermal fuse, to be used as a failsafe against malfunction in heat producing elements. Example: A faulty thermistor can cause an incorrectly reading of the temperature and thereby signaling the heater to keep producing heat past the target temperature and possibly starting a fire. Rated Temperature: 150c Trigger “Fusing” Temperature: 145 ± 2c...

GDSTIME 3010 24v Axial Fan - 27.46dBA 12000RPM_1288

GDSTIME 3010 24v Axial Fan - 27.46dBA 12000RPM_1288 2

In stock

Fans

GDSTIME 3010 24v Axial Fan - 27.46dBA 12000RPM

34347

€8.00

Introducing the GDSTIME 3010 24v Axial Fan - a compact, high-performance cooling solution. This powerful fan operates at a speed of 12000RPM, ensuring optimal airflow of 4.7 CFM to keep your devices cool and efficient. Despite its power, it maintains a low noise level of 27.46dBA, making it ideal for quiet environments. Ball Bearing Design: Ensures...

In stock

Extruder spare parts

MR85ZZ Kugleleje - BMG Bearing

20281

€0.96

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

LDO Orbiter 2 Filament Sensor Kit_2944 2

Out-of-Stock

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit O2SS

LDO

20621

€15.89

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

View

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

€10.13

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

Customers who bought this product also bought:

118.29ml Super Lube® Super Clean (NSF A1 Cleaner)_3069

In stock

Lubrication

118.29ml Super Lube® Super Clean (NSF A1 Cleaner)

6652

€10.13

Cleaner/degreaser - Food safe - NSF A1 Super Lube® Super Kleen Cleaner/Degreaser is a specially formulated, industrial strength, multi-purpose non-solvent solution designed for cleaning dirt, grease, grime and ink on virtually any water safe surface. Super Lube® Super Kleen Cleaner/Degreaser works effortlessly. Use full strength or dilute as required....

In stock

Spare parts for print bed

Glass Clip 1stk

33337

€0.64

In stock

Bearings

608ZZ ABEC-5

45388

€1.28

Experience the excellence of the 608ZZ ABEC-5, a top-tier, high-performance bearing designed for maximum efficiency and durability. Perfect for a variety of applications, from skateboards to 3D printers, it's a versatile solution for all your bearing needs. Superior Performance: With ABEC-5 precision rating, enjoy smoother, quieter operation and higher...

BIGTREETECH Octopus Pro V1.0(F429)_1365 2

In stock

Mainboards

BIGTREETECH Octopus Pro V1.0 (F446)

BIQU

25357

€52.79

Introducing the BIGTREETECH Octopus Pro V1.0 (F446), a cutting-edge 3D printer motherboard packed with powerful features. With an ARM Cortex-M4 series processor and the F446 chip, it supports 8 axes and is fully compatible with RepRap firmware.Size: Compact design with a size of 160x100mm and mounting hole distance of 150x90mm.Power Input: Operates on a...

In stock

Tools

Sharp edge spatula

€4.16

Introducing the Spartel med skarp kant - a must-have tool for all your print removal needs. This indispensable tool is perfect for printers with non-removable beds, providing an easy and effective solution for stuck prints. High-quality Metal Construction: Built to last, this sturdy spatula ensures durability and reliability. Sharp Edge: The sharp...

GDSTIME 4020 12v Blower Fan - 32.5dBA 6500RPM_1259

GDSTIME 4020 12v Blower Fan - 32.5dBA 6500RPM_1259 2

In stock

Fans

GDSTIME 4020 12v Blower Fan - 32.5dBA 6500RPM

34343

€7.36

Experience the power and efficiency of the GDSTIME 4020 12v Blower Fan. This compact cooling solution operates at a swift 6500 RPM, delivering an impressive 3.67 CFM air flow to keep your devices at optimal temperatures. Despite its power, it maintains a modest noise level of 32.5 dBA, ensuring a quiet working environment. Ball Bearing for smooth,...

3DO CAN BUS+USB Cable for 3D Printers - High-Performance & Durable

3DO CAN BUS+USB Cable for 3D Printers - High-Performance & Durable 2

In stock

Wiring

3DO CAN BUS + USB Cable - FEP/Silicone - 26AWG/2P+24AWG/2C+20AWG/2C

€13.76

Experience the power of reliable data transfer with our 3DO CAN BUS + USB Cable, specifically designed to meet the demands of 3D printers. This cable isn't your average find on the market; we've crafted it ourselves to ensure it ticks every box. Features 2x Twisted data pairs 26AWG for robust data transmission and 2x Power wire 24AWG & 2x Power wire...

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament

3DO PLA 2.0 Tough 1KG - Durable & Fast Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Anthracite

3DO

50497

€19.09

3DO PLA 2.0 is a high-quality PLA filament designed for 3D printing projects that require precision, strength, and safety.It offers improved mechanical properties, excellent printability, and a smooth matte finish, making it ideal for a wide range of applications, including toy manufacturing. Improved mechanical strength for durable prints Compliant...

Original Gates Belts (GATES-LL-2GT) - Price per meter_767

In stock

Belts

Original Gates Belts (GATES-LL-2GT) - Price per meter

42279

€8.32

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface.

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

Phaetus

4585

€38.28

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...