Heatsink for TMC2209 - 3DO

Heatsink for TMC2209 - 3DO

Heatsink for TMC2209 - 3DO

Heatsink for TMC2209 - 3DO

Heatsink for TMC2209 - 3DO

Heatsink for TMC2209 - 3DO

Heatsink for TMC2209

kr3.20

Heatsink for TMC2209

Product Details

Reference 27559

In stock 69 Items

8 other products in the same category:

BTT TMC2209 V1.2 - 3DO

BTT TMC2209 V1.2 - 3DO 2

Drivers

BTT TMC2209 V1.3

BIGTREETECH EZ5160 Pro V1.0 (High Volt Driver) - 3DO

BIGTREETECH EZ5160 Pro V1.0 (High Volt Driver) - 3DO 2

Drivers

BIGTREETECH EZ5160 Pro V1.0 (High Volt Driver)

Driver Chip: TMC5160-TA Power Supply Voltage(VM): 8-48V Maximum Current: 2.5A Maximum Subdivision: 256 Operating Mode: SPI

TMC5160T Plus w/ Case

New

Drivers

TMC5160T Plus w/ Case

TMC5160T Plus stepper driver features 8 separately mounted MOSFETs on the board that supports a maximum voltage of 60V.

BTT EZ2209 - 3DO

BTT EZ2209 - 3DO 2

Drivers

BTT EZ2209

BTT TMC2209 V1.2 - 3DO

BTT TMC2209 V1.2 - 3DO 2

Drivers

BTT TMC2240

Watterott TMC5160 HV Driver V1.5 - 3DO

Watterott TMC5160 HV Driver V1.5 - 3DO 2

Drivers

Watterott TMC5160 HV Driver V1.5

Stepper Motor Driver based on a Trinamic TMC5160. Further infos: learn.watterott.com/silentstepstick Features: Drive capability up to 3A (RMS) continuous coil current Step/Dir interface with up to 256 microsteps SPI interface for configuration Motion controller Motor supply voltage: 10...50V Logic supply voltage: 3.3...5V RSense: 0.075 Ohm...

BTT EZ-Driver Connector V1.0 - 3DO

Drivers

BTT EZ-Driver Connector V1.0

BIGTREETECH TMC5160T pro V1.0 (High Volt Driver)

Drivers

BIGTREETECH TMC5160T pro V1.0 (High Volt Driver)

BTT TMC5160 Pro V1.1 Driver Chip: TMC5160-WA Product Size: 15.3x20.4mm Power Supply Voltage(VM): 8-56V Maximum Current: 3A (2.54 single-row pins allow a maximum current of 3A) Maximum Subdivision: 256 Operating Modes: SPI mode, SD mode

Customers who bought this product also bought:

3DO ASA 1KG - Black - 3DO

3DO ASA 1KG - Black - 3DO 2

ASA

3DO ASA 1KG - Black

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial uses.It has a high level of process dependability and is well suited for mechanically stressed components. It's an electrically insulating substance.The layer adhesion, thermal stability, flow characteristics, and warping tendencies of 3DO ASA have all been optimized.The raw...

Heat Insert M3/M4/M5 - 3DO

Heat Insert M3/M4/M5 - 3DO 2

Accessory

Heat Insert M3/M4/M5

Brass Heat insert

Buy GDSTIME 4010 24v Axial Fan - 29.8dBA 7500RPM

Buy GDSTIME 4010 24v Axial Fan - 29.8dBA 7500RPM 2

Fans

GDSTIME 4010 24v Axial Fan - 29.8dBA 7500RPM

Bearing: Ball RPM:7500 Air flow CFM:8.29 Air Pressure (In H2O):0.22 Noise level dBA:29.8 Voltage: 24VDC Usage:0.04A Connector: XH2.54-2P Cable length: 200MM Size:40x40x10mm

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE) - 3DO

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE) - 3DO 2

Accessory

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)

Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It is ideally suited for industrial machinery and equipment. Machinery lasts longer, downtime is reduced, and productivity is increased. It is an...

PG7 Cable gland with strain relief - 1pcs

PG7 Cable gland with strain relief - 1pcs 2

Cables

PG7 Cable gland with strain relief - 1pcs

GDSTIME 2510 5v Axial Fan - 27.46dBA 12000RPM - 3DO

GDSTIME 2510 5v Axial Fan - 27.46dBA 12000RPM - 3DO 2

Fans

GDSTIME 2510 5v Axial Fan - 27.46dBA 12000RPM

Bearing: Ball RPM:12000 Air flow CFM:2.45 Air Pressure (In H2O):0.24 Noise level dBA:27.46 Voltage: 24VDC Usage:0.15A Connector: XH2.54-2P Cable length: 150MM Size:25x25x10mm

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM - 3DO

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM - 3DO 2

Fans

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM

Bearing: Ball RPM:12000 Air flow CFM:2.45 Air Pressure (In H2O):0.24 Noise level dBA:27.46 Voltage: 24VDC Usage:0.06A Connector: XH2.54-2P Cable length: 150MM Size:25x25x10mm

BTT SKR Pico V1.0 Control Board - 3DO

Out-of-Stock

Boards

BTT SKR Pico V1.0 Control Board

Using Raspberry Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware. BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful and...

View

Customers who bought this product also bought:

N52 Neodym Magnet 6x3mm - 50pcs black

Frame

N52 Neodym Magnet 6x3mm - 50pcs black

Cleaning brush soft brass - for nozzles / hotend - 3DO

Cleaning brush soft brass - for nozzles / hotend - 3DO 2

Accessory

Cleaning brush soft brass - for nozzles / hotend

Cleaning brush for removing dirt and burnt plastic. Can be used for both hot end and nozzle.

Optical Endstop Switch with 1m Cable - 3DO

Optical Endstop Switch with 1m Cable - 3DO 2

Endstops / switches

Optical Endstop Switch with 1m Cable

Pulley 2GT 20T (Bore/ID 5mm) - 3DO

Pulley 2GT 20T (Bore/ID 5mm) - 3DO 2

Product available with different options

Belts / Pulleys / Idler

Pulley 2GT 20T (Bore/ID 5mm)

Quality pulley with minimal tolarance of just 0.4um, ensuring you avoid the micro slip as seen by cheap pulleys. Produced with original molds/tools supplied by Gates, according to Gates requirements and specifications.

View

Dragon Heat Block - 3DO

Dragon Heat Block - 3DO 2

Spare parts

Dragon Heat Block

3DO ASA 1KG - Steel Blue - 3DO

3DO ASA 1KG - Steel Blue - 3DO 2

ASA

3DO ASA 1KG - Steel Blue

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial uses.It has a high level of process dependability and is well suited for mechanically stressed components. It's an electrically insulating substance.The layer adhesion, thermal stability, flow characteristics, and warping tendencies of 3DO ASA have all been optimized.The raw...

LDO Heat Insert tool M3 - 3DO

Accessory

LDO Heat Insert tool M3

Tool for inserting heat-set inserts in M3 size. Install on a compatible soldering iron.

Bondtech Volcano CHT® Coated Brass Nozzle - 3DO

Bondtech Volcano CHT® Coated Brass Nozzle - 3DO 2

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance price...

Bondtech CHT® Coated Brass Nozzle - 3DO

Bondtech CHT® Coated Brass Nozzle - 3DO 2

Nozzle

Bondtech CHT® Coated Brass Nozzle

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Fly SB2040 V1 Board For Stealthburner

Fly SB2040 V1 Board For Stealthburner 2

Boards

Fly SB2040 V1 Board For Stealthburner

The SB2040 board uses can communication to connect the upper computer to the UTOC board, and then communicates with the SB2040 through the UTOC. For SB2040 board, it is recommended to choose FLY-UTOC-1 Board, because most of the upper computer and the main board through usb communication is enough, so there is no need to use Can communication. Board...

Product added to wishlist

We use cookies to ensure that we give you the best experience on our website.
Read more in our cookie and privacy policy