AzureFilm Refill LumberLay Pine Filament – Pine

AzureFilm Refill LumberLay Pine combines 40% recycled wood with 60% PLA. The wood fibres give prints a natural appearance, a warm surface and a feel similar to real wood. The Pine variant has a light, neutral wood colour suited to decorations, figures, vases, interior objects and models.

Natural variation in the wood fibres means the shade may differ slightly between production batches.

Important before printing

• The filament must be dried for 8 hours at 55°C before use
• Do not use with a 0.2mm nozzle
• A wear-resistant nozzle of 0.6mm or larger is recommended due to the wood fibres
• Recommended nozzle temperature: 200–230°C
• Recommended bed temperature: 60°C

Refill and compatibility

The refill format reduces the use of disposable spools. Fit the filament to an AzureFilm Master Spool or compatible Bambu Lab reusable spool. Master Spool is not included and must be purchased separately.

Technical information

• Material: 40% recycled wood / 60% PLA
• Colour: Pine / light wood
• Diameter: 1.75mm
• Net weight: 750g
• Low flexibility
• Medium strength and durability
• Minimal shrinkage and warping
• Not soluble

Package contents

• 1 × 750g AzureFilm Refill LumberLay Pine