Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle V2 (0.5mm) By Rentable Socks

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need

0.5mm Tungsten Carbide nozzle
High Flow, low clog geometry
High hardness for sustained printing with Filled / Abrasive Filaments
Reduced pushing force to get more from your extruder
Increased layer bonding strength when printing at same temperature as steel nozzles
Reduced filament sticking with some filaments
6mm flats to fit inside nozzle shields
V6 and Mk8 compatible

See review by Vez here https://www.youtube.com/watch?v=-7_OIoBxBtA

Diameter

0.5mm

In stock

kr632.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

Thread: V6 / M6
Material: Tungsten Carbide

Reference 4995

12 other products in the same category:

E3D RapidChange Revo™ Brass Nozzle_3135

E3D RapidChange Revo™ Brass Nozzle_3135 2

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Bondtech Volcano CHT® Coated Brass Nozzle_2950

Bondtech Volcano CHT® Coated Brass Nozzle_2950 2

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

Bondtech CHT® Coated Brass Nozzle_1801

Bondtech CHT® Coated Brass Nozzle_1801 2

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Bondtech CHT Spider Brass Nozzle for 1.75 & 2.85mm Filaments

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

E3D RapidChange Revo™ Brass Nozzle_3135

E3D RapidChange Revo™ Brass Nozzle_3135 2

In stock

Nozzle

E3D RapidChange Revo™ Brass Nozzle 0.6mm

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Phaetus M6/V6 Tungsten Carbide Nozzle for Precision Printing

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision 2

Out-of-Stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

View

Phaetus PH Volcano Brass Nozzle 1,75 mm_2802

In stock

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Phaetus PS M6 Brass Nozzle 1,75 mm_2771

In stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow 2

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Phaetus Volcano Compatible Tungsten Carbide Nozzle_2742

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

Out-of-Stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

View

Customers who bought this product also bought:

Sharp edge spatula_1

Sharp edge spatula_1 2

In stock

Tools

Sharp edge spatula

Introducing the Spartel med skarp kant - a must-have tool for all your print removal needs. This indispensable tool is perfect for printers with non-removable beds, providing an easy and effective solution for stuck prints. High-quality Metal Construction: Built to last, this sturdy spatula ensures durability and reliability. Sharp Edge: The sharp...

Chube Conduction Hotend: Precision High-Flow 3D Printing

Chube Conduction Hotend: Precision High-Flow 3D Printing 2

Out-of-Stock

Complete hotends

Chube Conduction

LUKES LABORATORY

The Chube Conduction hotend is built for precision and high-performance printing. Precision Design: 52mm meltzone, weighs 74g Advanced Technology: Includes Chalice Heatbreak for superior performance in extreme conditions Durable and Efficient: Rated for 500°C operation with a stainless steel cooling shield User-Friendly: Compatible with RepRap...

View

3DO ASA 1KG RatRig Green - UV-Resistant Copolymer

3DO ASA 1KG RatRig Green - UV-Resistant Copolymer 2

In stock

ASA

3DO ASA 1KG - RatRig Green

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

Out-of-Stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

LUKES LABORATORY

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

View

Honey Badger HighTemp Magnetic Sheets | Durable & Custom

Product available with different options

Spare parts for print bed

Honey Badger HighTemp Magnetic Sheets

Thickness: Total 1.75 mm (magnet + adhesive) High-Temperature Adhesive: Features 3M 468MP glue capable of withstanding up to 204°C short-term and 149°C long-term Enhanced Durability: Offers 35% higher temperature resistance than standard 300LSE adhesive

View

3M 5952 VHB Tape 3m - Strong, Durable Bonding Solution

In stock

Tape

3M 5952 VHB Tape - 3 meter

Experience the remarkable strength and enduring durability of the 3M 5952 VHB Tape. This user-friendly permanent bonding method offers instant adhesion upon contact, thanks to its pressure-sensitive adhesive. Key Features:Maximum operating temperature of 149 ℃Thickness of 1.1 mmGenerous length of 3 metersSet a new standard in bonding with this product,...

Hollow Clock Kit: DIY 3D Printed Timepiece Project

Out-of-Stock

3D Printer Project Kits

Hollow Clock Kit DIY 3D Printed Clock Project

Hollow Clock Kit: Create Your Own 3D Printed Timepiece Embark on a fascinating DIY project with the Hollow Clock Kit. Key features include: High-quality 3D printing model kit for 3D printer enthusiasts Includes all necessary electronic components Pre-flashed control panel for immediate use Minute hand moves every 60 seconds Option to modify code...

View

Thermistor Ceramic Heater for Bambu Lab P1P/P1S

Thermistor Ceramic Heater for Bambu Lab P1P/P1S 2

In stock

Heater

Thermistor & Ceramic Heater for Bambu Lab P1P/P1S

This ceramic heater and thermistor module is designed for the Bambu Lab P1P and P1S 3D printers. It combines a 24V 48W heating element with a 100K Ohm NTC 3950 thermistor for accurate temperature control and efficient heating. Heating slice: 24V 48W Thermistor: 100K Ohm NTC 3950 Resistance Accuracy: ±1% Temperature Range: -40℃ to +300℃ Max Rated...

Customers who bought this product also bought:

Phaetus Rapido Plus v2 (PT1000): 3D Printing Revolution

Phaetus Rapido Plus v2 (PT1000): 3D Printing Revolution 2

Out-of-Stock

Complete hotends

Phaetus Rapido Plus v2 (PT1000)

Experience the power of the Phaetus Rapido Plus v2 (PT1000), an upgraded 3D printing innovation designed for high-speed, high-temperature printing. This state-of-the-art tool features a modular heater, thermistor, and block construction for reduced maintenance costs and enhanced durability.Its new heat block design boasts a larger melt zone, perfect for...

View

High Temp Silicone Sealant Black 80g - Resists -65°C to +380°C

Out-of-Stock

Other Accessories

High Temperature Silicone Sealant - Black 80g

High-temperature resistant sealant, resistant to high (+380°C) and low temperatures (-65°C). Elastic, fast curing sealant that forms lasting, not shrinking and UV-resistant fi lling compound. Seals and glues most surfaces such as glass, ceramics, aluminum and metal perfectly. curing time: 3 mm/24 h tooling time: 10-20 min operating temperature from...

View

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower

CPAP Fan Pipe 1.8M Soft for WS7040 - Upgrade Your Blower 2

In stock

Fans

CPAP Fan Pipe 1.8M Soft for WS7040

Introducing our premium CPAP Fan Pipe 1.8M Soft for WS7040, the perfect companion for your WS7040 blower. This fan pipe is designed with a soft and flexible material that reduces resistance, ensuring smooth and effortless movement.Our unique shell design prevents folding or blockage, providing consistent and uninterrupted airflow. This fan pipe requires a...

3DO ASA 1KG Steel Blue: Durable & UV-Resistant Filament

3DO ASA 1KG Steel Blue: Durable & UV-Resistant Filament 2

In stock

ASA

3DO ASA 1KG - Steel Blue

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

3DO ASA GF Makita Blue 1KG - UV-Resistant Industrial Filament

3DO ASA GF Makita Blue 1KG - UV-Resistant Industrial Filament 2

In stock

ASA

3DO ASA GF Makita Blue 1KG - Glass Fiber

3DO ASA-GF is a glass fiber-reinforced, UV-resistant, and weatherproof copolymer designed for high-performance industrial applications.It offers exceptional rigidity, heat resistance, and low warping, making it ideal for mechanically stressed components exposed to outdoor conditions.A hardened nozzle is recommended due to the abrasive nature of the glass...

Micro Omron SS-5GL Switch_840

Micro Omron SS-5GL Switch_840 2

In stock

Endstops / switches

Micro Omron SS-5GL Switch

Discover the Micro Omron SS-5GL Switch, a compact, high-performance switch designed for optimal efficiency and reliability. This versatile device is a perfect solution for a wide range of applications, offering superior performance with minimal footprint. Compact Design: Despite its small size, the Micro Omron SS-5GL Switch delivers big on performance,...

Nevermore Carbon Pellets: High-Quality Air Filtration

Nevermore Carbon Pellets: High-Quality Air Filtration 2

Out-of-Stock

Other Accessories

Nevermore Carbon Pellets

Introducing Nevermore Aktivt Kul, the latest high-quality carbon product from the creators of the renowned Nevermore filters. Specially crafted for air filtration, our carbon lasts up to 2x longer than standard carbon pellets, ensuring cleaner, fresher air for longer. It's expertly designed to capture more Volatile Organic Compounds, enhancing your air...

View

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

Out-of-Stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

View

All-Metal Pancake Motor Heat Sink for 3D Printers | Cooling Upgrade

All-Metal Pancake Motor Heat Sink for 3D Printers | Cooling Upgrade 2

In stock

Stepper Motors

All-Metal Pancake Motor Heat Sink for 3D Printers

Enhance Your 3D Printer's Performance with Superior Heat Dissipation Upgrade your 3D printer's extruder motor cooling with our all-metal heat sink. Key features include: Designed for Creality K1, K1 Max, K1C, and similar 3D printers Compatible with round motors up to 36mm outer diameter Fits Moons' Nema14 36mm Pancake Stepper Motors All-metal...

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration

Nevermore Scorch S 850ml: Enhanced 3D Printing Filtration 2

In stock

Other Accessories

Nevermore Scorch S 850ml: Revolutionize Your 3D Printing Air Filtration

Standard (750 ml, 0.66 kg) XL (2300 ml, 2 kg) Experience unmatched efficiency with the Nevermore Scorch S 850ml, a superior air filtration solution for 3D printers. Specially designed for high-temperature environments, Scorch surpasses traditional carbon filters. Its innovative formula, a blend of zeolite and potassium permanganate, effectively captures...

Product added to wishlist