XT30U(2+2)-F Connector for CAN Bus Toolhead Boards

XT30U(2+2)-F Female Connector for CAN Bus Toolhead Boards

The XT30U(2+2)-F Female Connector by Amass is perfect for CAN Bus toolhead boards in 3D printers. This connector features built-in signal pins, eliminating the need for MOLEX terminals. Solder directly on for a secure and efficient connection.

Ideal for: CAN Bus toolhead boards in 3D printers
Features: Built-in signal pins, no MOLEX needed
Connector Type: Female

Out-of-Stock

kr8.00

Subscribe To When In Stock

You have successfully subscribed to this product

Product Details

16 other products in the same category:

WAGO 3x Terminal Block: 0.08-4.0mm Universal Electrical Connector

WAGO 3x Terminal Block: 0.08-4.0mm Universal Electrical Connector 2

Out-of-Stock

Wiring

WAGO 3x 0.08 - 4.0 mm

kr2.80

Introducing the WAGO 3x 0.08 - 4.0 mm, your reliable solution for seamless electrical connections. This high-quality terminal block is designed for maximum efficiency and safety. Universal Compatibility: With a range of 0.08 - 4.0 mm, it accommodates a wide variety of wire sizes.High-Quality Material: Crafted from top-grade copper alloy, it ensures...

View

WAGO 2x 0.08-4.0 mm: Efficient Wire Connector Tool

WAGO 2x 0.08-4.0 mm: Efficient Wire Connector Tool 2

Out-of-Stock

Wiring

WAGO 2x 0.08 - 4.0 mm

kr2.40

Introducing the WAGO 2x 0.08 - 4.0 mm! This versatile tool is designed to make your wiring tasks easier and more efficient. Universal Compatibility: WAGO 2x 0.08 - 4.0 mm is designed to accommodate a wide range of wire sizes, making it a must-have tool for any electrical project.Easy to Use: Its user-friendly design ensures easy handling, allowing you to...

View

3DO High Temp USB A-C Cable for 3D Printing - FEP+Silicone

In stock

Wiring

3DO High Temperatur USB A - USB C Cable (FEP+Silicone)

kr87.20

Highly Reliable: It features a 1x Twisted 28AWG data pair, 2x 24AWG power wires, and a drain/ground wire for optimal performance. Durable Construction: The FEP jacket with an outer silicone sheath ensures long-lasting use and resistance to wear and tear. Superior Isolation: With Graphene EMI isolation, this cable guarantees smooth data transfer...

3DO 5-Pin Connectors with Crimp Pins for USB Hub & Cameras (1.0mm Pitch)

In stock

Wiring

5x 3DO Connectors with 30 Crimp Pins (1.0mm Pitch)

3DO

kr20.00

Set includes 5 connectors and 30 crimp pins 1.0mm pitch for secure connections Designed for 3DO USB hub, nozzle camera, and enclosure camera Durable and reliable for custom projects Easy to install for various 3DO devices

3DO CAN BUS+USB Cable for 3D Printers - High-Performance & Durable

3DO CAN BUS+USB Cable for 3D Printers - High-Performance & Durable 2

In stock

Wiring

3DO CAN BUS + USB Cable - FEP/Silicone - 26AWG/2P+24AWG/2C+20AWG/2C

kr103.20

Experience the power of reliable data transfer with our 3DO CAN BUS + USB Cable, specifically designed to meet the demands of 3D printers. This cable isn't your average find on the market; we've crafted it ourselves to ensure it ticks every box. Features 2x Twisted data pairs 26AWG for robust data transmission and 2x Power wire 24AWG & 2x Power wire...

Out-of-Stock

Wiring

WAGO 5x 0.08 - 4.0 mm - 25Pcs

kr95.20

Introducing the WAGO 221-415 - a pack of 25 compact and reliable connectors designed to simplify your electrical installations. Each connector can accommodate a wide range of wire sizes from 0.08 to 4.0 mm, providing exceptional versatility for all your wiring needs. Universal Compatibility: Ideal for solid, stranded, and fine-stranded wires.Easy to Use:...

View

In stock

Wiring

Ferrit noise filter

40374

kr9.60

Introducing the Ferritstøjfilter, a compact and efficient solution to electronic interference. This clever device, measuring just 30x15x17mm, is designed to reduce noise and improve the performance of your electronic equipment.Featuring a 210Ω impedance, the Ferritstøjfilter is easy to install - simply clip it onto your wires or cables. Its small size and...

Out-of-Stock

Wiring

WAGO 5x 0.08 - 4.0 mm

kr4.40

Upgrade your electrical connections with the WAGO 5x 0.08 - 4.0 mm! This compact and versatile connector is perfect for a variety of wiring tasks, ensuring safe and reliable connections every time. Universal Compatibility: With a size range of 0.08 - 4.0 mm, it can accommodate a wide range of wire sizes.Easy to Use: Its user-friendly design allows for...

View

Heavy Duty TC+FEP Wire 20AWG | Industrial Cable Solutions

Heavy Duty TC+FEP Wire 20AWG | Industrial Cable Solutions 2

In stock

Wiring

3DO High Temperature TC+FEP Wire 20AWG/0.50mm2 - 50meter

kr279.20

Heavy duty industrial wire for demanding applications TC+FEP construction - UL1332 compliant Gauge: 20AWG (0.50mm2) Strands: 100/0.08TS Outer diameter: 1.6mm Working temperature: -50°C to +200°C Minimum bend radius: 8mm static, 11mm dynamic Length: 50 meter per reel

10cm 3DO 5-Pin Breakout Cable for USB Hub & Cameras

In stock

Wiring

10cm 3DO 5-Pin Breakout Cable for USB Hub/Cameras

3DO

kr7.20

10cm 3DO 5-pin breakout cable 1.0mm pitch connector Designed for 3DO USB hub, nozzle camera, and enclosure camera Color-coded wires for easy connection Compact and reliable for tight spaces

In stock

Wiring

Voron 2.4 Wiring kit

40406

kr311.20

Introducing the Voron 2.4 Ledningsnet, a comprehensive wiring solution designed for your 3D printer needs. This versatile kit is compatible with both the Voron 2.4 and Trident models. The package includes PTFE (24AWG - 200C) wiring for your heater, thermistor, fans, inductive probe, X/Y endstop, and extruder motor. Its silicone (24AWG) wiring ensures...

LDO Voron Toolhead Harness for Enhanced 3D Printing

LDO Voron Toolhead Harness for Enhanced 3D Printing 2

In stock

Wiring

LDO Voron Toolhead Harness

kr140.00

Enhance your 3D printing experience with the LDO Voron Toolhead Harness. Designed for optimal performance, this toolhead harness is compatible with a range of models including the Trident-250, Trident-300, V2.4-300, and V2.4-350. Each variant is tailored to seamlessly fit the corresponding model, ensuring a hassle-free installation process. Part NO....

3DO High Temp USB A-C Cable for 3D Printing - FEP+Silicone 2

In stock

Wiring

3DO High Temperatur USB A - USB C Cable (FEP+Silicone) 90 Degree

kr87.20

3DO USB Cable - FEP/Silicone - 28AWG/2P+24AWG/2C | Durable and Reliable

In stock

Wiring

3DO USB Data Cable - FEP/Silicone - 28AWG/2P+24AWG/2C

kr60.00

The 3DO USB Data Cable is purpose-built for precise data transfer and reliable power delivery in high-performance environments. Designed with advanced materials and engineered to stringent specifications, this cable meets the rigorous demands of industrial and technical applications. Features 2x Twisted data pairs 28AWG for stable and accurate data...

WAGO 221-413 Connectors 50Pcs - Secure & Easy Electrical Fix

WAGO 221-413 Connectors 50Pcs - Secure & Easy Electrical Fix 2

Out-of-Stock

Wiring

WAGO 3x 0.08 - 4.0 mm - 50Pcs

kr116.00

Introducing the WAGO 3x 0.08 - 4.0 mm - 50Stk, your efficient solution for secure and reliable electrical connections. This pack contains 50 pieces of the acclaimed WAGO 221-413 connector, designed with the user in mind.Universal Compatibility: These connectors can accommodate a wide range of wire sizes from 0.08 to 4.0 mm, making them perfect for various...

View

In stock

Wiring

USB SD / Micro SD cardreader

40560

kr63.20

Experience swift, seamless data transfer with our 3.0 USB SD / Micro SD kortlæser. Designed to support both USB A and USB C interfaces, this versatile device also includes 2x micro USB adapters. Universal Compatibility: Works effortlessly with all USB C and USB A devices, making it a must-have for every tech-savvy individual.High-Speed Data Transfer:...

Customers who bought this product also bought:

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

3DO Enclosure / Nozzle Camera V2 DSP PCB

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 DSP PCB

3DO

kr183.20

The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter_770

In stock

Belts

Original Gates Belts EPDM (GATES-LL-2GT) Price per meter

42280

kr79.20

Original Gates belts are produced to perfection. Incredibly durable and while driving, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. The EPDM version of Gates is made to stand between -45C to 135C, with the standard version going -35C to 80C.In addition, the EPDM version has up to 2x loins live time...

In stock

Wiring

5x 3DO Connectors with 30 Crimp Pins (1.0mm Pitch)

3DO

kr20.00

Chube Heat Shield Three Pack | Heat Protection for Chube

Chube Heat Shield Three Pack | Heat Protection for Chube 2

In stock

Hotend spare parts

Chube Heat Shield - Three Pack Heat Shields

LUKES LABORATORY

kr75.00

Keep your Chube in perfect condition with these replaceable heat shields - now in a convenient three-pack! Protects your Chube from heat exposure Easy to replace when needed Value pack with three shields Perfect fit for Chube With this three-pack of heat shields, you can easily maintain your Chube's protection and ensure long-lasting...

3DO Enclosure / Nozzle Camera V2 Sensor 2

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 Sensor

3DO

kr156.00

Sensor and lens for 3DO Nozzle / Enclosure Camera V2. Choose between three options: Nozzle camera glued (lens glued to 3.45cm focus range from behind FPC) Nozzle camera not glued (lens not glued and can be adjusted to your desired focus range) Enclosure camera not glued, 120° FoV (lens not glued and can be adjusted to your desired focus range)...

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

In stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus

kr303.20

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

Titanium Extrusion Backers for Voron V2.4 & Trident | Enhance Frame Ri

In stock

Frame accessories

Titanium Extrusion Backers for Voron V2.4/Trident - Honeybadger Series

kr480.00

Titanium backers for Voron V2.4 and Trident counteract the bimetallic nature of the frame and rails, creating a flatter, more rigid structure. From the Github: "Due to differing thermal expansion coefficients between steel (rails) and aluminum (extrusions), the Voron V2 gantry acts like a large bimetallic temperature sensor, warping as chamber...

Customers who bought this product also bought:

HoneyBadger 2510 Performance 24V Axial Fan - High-Speed Cooling

HoneyBadger 2510 Performance 24V Axial Fan - High-Speed Cooling 2

In stock

Fans

2510 Performance axial fan 24V by HoneyBadger

HoneyBadger

kr55.20

Introducing the HoneyBadger 2510 Performance Axial Fan 24V, part of our renowned P-Series. This high-performance fan is designed with a robust motor and impressive static pressure, making it a perfect fit for modern toolheads. Model: 2510B-12V-20000Construction: Built with a dual ball bearing design for durability and longevity.Voltage: Operates on 12v/24...

In stock

T-nuts

T-Nut (Spring) M3 - 100Pcs (for 2020 profil)

54691

kr119.20

Enhance your construction and DIY projects with our T-Nut (Spring) M3 - 100Stk (til 2020 profiler). Perfectly designed for 2020 profile systems, these T-Nuts provide a secure, sturdy, and reliable connection. High Quality: Made from durable, rust-resistant material, ensuring longevity and performance.Easy Installation: Spring-loaded ball bearing on the...

In stock

Hotend spare parts

Slice Engineering Thermal Paste

15685

kr76.00

Boron Nitride thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while...

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_2766

Out-of-Stock

Lubrication

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

6588

kr95.20

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

View

In stock

Tools

Plastic trimmer knife

6196

kr31.20

Refine your 3D prints with our ergonomically designed finishing tool. Its precision tip easily removes excess material and enhances details, while the durable plastic ensures long-lasting use. Lightweight and easy to maneuver for a flawless finish. Suitable for various print materials.

In stock

Wiring

5x 3DO Connectors with 30 Crimp Pins (1.0mm Pitch)

3DO

kr20.00

Vz-Hextrudort Aluminum Extruder Shell - VzBoT by Mellow

Vz-Hextrudort Aluminum Extruder Shell - VzBoT by Mellow 2

In stock

Complete extruders

Vz-Hextrudort From VzBoT By Mellow

22738

kr476.00

Introducing the Vz-Hextrudort from VzBoT by Mellow, a high-precision extruder shell crafted from 6061 aluminum alloy. This lightweight yet robust shell outperforms plastic alternatives, offering superior strength and precision. High Precision: CNC machining guarantees accuracy and consistency in every product.Lightweight & Strong: The 6061 aluminum alloy...

In stock

Wiring

10cm 3DO 5-Pin Breakout Cable for USB Hub/Cameras

3DO

kr7.20

10cm 3DO 5-pin breakout cable 1.0mm pitch connector Designed for 3DO USB hub, nozzle camera, and enclosure camera Color-coded wires for easy connection Compact and reliable for tight spaces

Goliath Hotend by Mellow - Elevate 3D Printing

Goliath Hotend by Mellow - Elevate 3D Printing 2

In stock

Complete hotends

Goliath Hotend (AKA LSD) From VzBoT By Mellow

10744

kr1,196.00

Introducing the Goliath Hotend (AKA LSD) by VzBoT from Mellow, the ultimate tool for 3D printing enthusiasts. This innovative hotend boasts a choice of air-cooled or water-cooled aluminum heatsink for optimal performance. Its unique bi-material copper and zirconia heatbreak ensures efficient heat transfer. With ceramic spacers and a nickle-plated copper...

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap

Boost Printing with Bondtech CHT BiMetal Nozzle for RepRap 2

In stock

High Flow

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Upgrade your 3D printing experience with the Bondtech CHT BiMetal RepRap Coated Nozzle. Crafted from a blend of copper and hardened vanadium steel, this nozzle is designed for high-flow applications and abrasive materials. The nozzle comes with a nickel coating for enhanced durability and performance. It's designed to increase the maximum volumetric flow...