In stock Nozzle Phaetus Volcano Compatible Tungsten Carbide Nozzle Phaetus 4585 kr287.20 The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From... Add to cart
-25% In stock Nozzle E3D RapidChange Revo™ Brass Nozzle 0.6mm E3D 4661 kr131.40 kr175.20 Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten... Add to cart
In stock Nozzle Phaetus PH Volcano Brass Nozzle 1,75 mm Phaetus 4598 kr71.20 The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster... Add to cart
In stock Nozzle Bozzle V2 (0.5mm) By Rentable Socks 4654 kr632.00 Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles... Add to cart
In stock Nozzle Bondtech Volcano CHT® Coated Brass Nozzle Bondtech 4622 kr188.00 Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance... Add to cart
In stock Nozzle Bondtech CHT® MK8 Coated Brass Nozzle Bondtech 4428 kr148.00 1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench Add to cart
Remote storage 2-3 days Nozzle Phaetus MK8 Tungsten Carbide Nozzle Phaetus 4584 kr287.20 The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From... Add to cart
In stock Hotend spare parts Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends kr199.20 High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread) Add to cart
In stock Nozzle Phaetus PS M6 Brass Nozzle 1,75 mm Phaetus 4591 kr56.00 Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but... Add to cart
Product available with different options Nozzle Phaetus M6 / V6 Tungsten Carbide Nozzle Phaetus 4583 kr308.00 The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From... View
In stock Nozzle Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision Phaetus kr303.20 Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for... Add to cart
Remote warehouse 2-3 days Nozzle E3D RapidChange Revo™ Brass Nozzle E3D 4661 kr175.20 Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten... Add to cart
In stock Nozzle Bondtech CHT BiMetal Vol Coated Nozzle Bondtech 4727 kr335.20 Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house, Add to cart
-30% In stock Nozzle Bondtech CHT Spider Coated Brass Nozzle Bondtech kr83.44 kr119.20 Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6... Add to cart
In stock ASA AzureFilm ASA Grey 1Kg AzureFilm FS171-7001 kr140.00 Made in EU, high quality ASA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 240–260°C Heated bed: Recommended 100–120°C + Enclosure Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers. Add to cart
In stock Tape Kapton high temperature tape - 33Meter 6282 kr12.00 Kapton Høj Temperaturs Tape - 33Meter is an exceptional, high-performance tape designed to withstand extreme temperatures. This versatile tape is perfect for a broad range of applications, from insulating circuit boards to protecting sensitive components in electronics. High-Temperature Resistance: Withstand temperatures up to 260°C, making it ideal for... Add to cart
In stock Frame accessories Titanium Extrusion Backers for Voron V2.4/Trident - Honeybadger Series kr480.00 Titanium backers for Voron V2.4 and Trident counteract the bimetallic nature of the frame and rails, creating a flatter, more rigid structure. From the Github: "Due to differing thermal expansion coefficients between steel (rails) and aluminum (extrusions), the Voron V2 gantry acts like a large bimetallic temperature sensor, warping as chamber... Add to cart
In stock Nozzle Bondtech CHT® MK8 Coated Brass Nozzle Bondtech 4428 kr148.00 1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench Add to cart
In stock Bearings 608ZZ ABEC-5 45388 kr9.60 Experience the excellence of the 608ZZ ABEC-5, a top-tier, high-performance bearing designed for maximum efficiency and durability. Perfect for a variety of applications, from skateboards to 3D printers, it's a versatile solution for all your bearing needs. Superior Performance: With ABEC-5 precision rating, enjoy smoother, quieter operation and higher... Add to cart
In stock Cameras 3DO Enclosure / Nozzle Camera V2 DSP PCB 3DO kr183.20 The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2 Add to cart
In stock ASA 3DO ASA 1KG - Red 3DO 52501 kr199.20 3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB... Add to cart
In stock Wiring XT30U(2+2)-F Female Connector for CAN Bus Toolhead Boards kr8.00 The XT30U(2+2)-F Female Connector by Amass is perfect for CAN Bus toolhead boards in 3D printers. This connector features built-in signal pins, eliminating the need for MOLEX terminals. Solder directly on for a secure and efficient connection. Ideal for: CAN Bus toolhead boards in 3D printers Features: Built-in signal pins, no MOLEX needed Connector... Add to cart
In stock Build surfaces HoneyBadger P-Series Smooth Black PEI beds HoneyBadger 33742 kr150.00 Experience the ultimate in 3D printing with the HoneyBadger P-Series Smooth Black PEI beds. Crafted from premium Japanese PEI, this printing surface is as smooth as glass, ensuring flawless prints every time. Durable: Features 0.5mm spring steel for superior strength and longevity (0.4mm on Bambu, in line with OEM specifications). High Quality: Made... Add to cart
In stock Wiring WAGO 2x 0.08 - 4.0 mm kr2.40 Introducing the WAGO 2x 0.08 - 4.0 mm! This versatile tool is designed to make your wiring tasks easier and more efficient. Universal Compatibility: WAGO 2x 0.08 - 4.0 mm is designed to accommodate a wide range of wire sizes, making it a must-have tool for any electrical project.Easy to Use: Its user-friendly design ensures easy handling, allowing you to... Add to cart
In stock ASA 3DO ASA 1KG - RatRig Green 3DO 52599 kr199.20 3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB... Add to cart
In stock Fans GDSTIME 3010 24v Blower Fan - 29.2dBA 9500RPM 34636 kr71.20 Introducing the GDSTIME 3010 24v Blower Fan - an efficient, high-speed solution for your cooling needs. This compact fan combines power and performance, operating at a swift 9500 RPM while maintaining a pleasantly low noise level of 29.2dBA.Bearing Type: Ball - for long-lasting and reliable performance.Air Flow: 1.85 CFM - ensuring efficient air... Add to cart
Out-of-Stock Screws M4 Knurled Nut (DIN 466-B) - 4Pcs 54544 kr52.00 4 pcs. M4 Knurled Nut (DIN 466-B) View
Product available with different options Cameras 3DO Enclosure / Nozzle Camera V2 FPC Cable 3DO kr76.00 FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2 View
In stock Extruder spare parts Bowden Tube Buckle for 6.35mm PTFE tube 198 kr4.00 spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced. Add to cart
In stock Extruder spare parts Capricorn Bowden PTFE Capricorn 1617 kr103.20 Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter Add to cart