Bondtech CHT® MK8 Coated Brass Nozzle_1798

Bondtech CHT® MK8 Coated Brass Nozzle_1797

Bondtech CHT® MK8 Coated Brass Nozzle

Name: Bondtech CHT® MK8 Coated Brass Nozzle
Brand: Bondtech
SKU: 4428
Price: 148 DKK
Availability: InStock

1 unit per pack;

Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm;

Optimized for 1.75mm filament;

Compatible with 2.85mm filament.

Requires an 8mm wrench

Diameter

In stock

kr148.00

Product Details

Thread: MK8

Brand

Reference 4623

13 other products in the same category:

Bondtech Volcano CHT® Coated Brass Nozzle_2950

In stock

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance...

Remote storage 2-3 days

Nozzle

Phaetus MK8 Tungsten Carbide Nozzle

Phaetus

4584

kr287.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

Product available with different options

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Phaetus

4591

kr56.00

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

View

Product available with different options

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

Phaetus

4583

kr287.20

View

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

E3D

4661

kr175.20

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

In stock

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

Phaetus

4598

kr71.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

In stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

kr199.20

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

In stock

Nozzle

Bozzle V2 (0.5mm) By Rentable Socks

4654

kr632.00

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need 0.5mm Tungsten Carbide nozzle High Flow, low clog geometry High hardness for sustained printing with Filled / Abrasive Filaments Reduced pushing force to get more from your extruder Increased layer bonding strength when printing at same temperature as steel nozzles...

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Bondtech

kr119.20

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

In stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus

kr303.20

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

In stock

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

Phaetus

4585

kr287.20

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Customers who bought this product also bought:

3DO CAN BUS Cable for 3D Printers - High-Temperature Resistance

3DO CAN BUS Cable for 3D Printers - High-Temperature Resistance 2

In stock

Wiring

3DO CAN BUS Cable - FEP/Silicone - 26AWG/1P+20AWG/2C

kr76.00

Introducing the 3DO CAN BUS Cable - FEP/Silicone - 26AWG/1P+20AWG/2C, the perfect solution for your 3D printer needs. Designed in-house after finding no satisfactory options on the market, this cable is built to meet the rigorous demands of 3D printers. High-quality components: Features a twisted data pair (26AWG), two power wires (20AWG), and a...

Silica Gel 1Kg - Loose beads with indicator_1737

Silica Gel 1Kg - Loose beads with indicator_1737 2

In stock

Storage Solutions

Silica Gel 1Kg - Loose beads with indicator

46414

kr156.00

Introducing the Silica Gel 1Kg - Løse kulger med indicator, your ultimate solution for absorbing unwanted moisture. This 1Kg silica gel works efficiently to trap condensation, ensuring a dry and safe environment.Highly Absorbent: The silica gel absorbs moisture and locks it in, protecting your belongings from dampness and humidity.Color Indicator: It...

In stock

Tools

PTFE Cutting Knife

638

kr13.60

Make your work easier and more precise with our PTFE Cutting Knife. This knife is designed to refresh the end of a used PTFE tube, or to cut new tubes without damaging the material. With our cutting knife, you always get a straight cut and avoid deforming the PTFE tube. Precision: Always achieve a straight cut without deforming the PTFE tube....

In stock

Bed adhesives

DimaFix Spray

6272

kr95.20

Experience the perfect adhesion every time with DimaFix Spray. Engineered for materials that are challenging to adhere, like ABS/ASA, it's an essential tool for 3D printing. Excellent Adhesion: Say goodbye to warping. DimaFix ensures a strong bond between your print and the bed, especially with high-temperature materials and a heatbed over 70C.Easy...

AzureFilm PLA Transparent Filament 1Kg - High Quality 3D Prints

AzureFilm PLA Transparent Filament 1Kg - High Quality 3D Prints 2

In stock

PLA

AzureFilm PLA Transparent 1Kg

AzureFilm

FP171-0000

kr119.20

Made in EU, high quality PLA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 200–230°C Heated bed: Not required (recommended 50–60°C) Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

3DO ASA 1KG Makita Blue: UV-Resistant Copolymer

3DO ASA 1KG Makita Blue: UV-Resistant Copolymer 2

In stock

ASA

3DO ASA 1KG - Makita Blue

3DO

52627

kr199.20

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial applications. It offers high mechanical strength, thermal stability, and low warping tendencies, making it ideal for outdoor and automotive components. Superior UV and weather resistance Matte surface finish for a professional look Fire retardant according to UL94 HB...

In stock

High Flow

Dragon ST/HF Silicone Sock

Phaetus

1483

kr31.20

Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34 2

In stock

Extruder spare parts

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

1913

kr9.60

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

Customers who bought this product also bought:

In stock

Extruder spare parts

Capricorn Bowden PTFE

Capricorn

1617

kr103.20

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

In stock

Wiring

USB SD / Micro SD cardreader

40560

kr63.20

Experience swift, seamless data transfer with our 3.0 USB SD / Micro SD kortlæser. Designed to support both USB A and USB C interfaces, this versatile device also includes 2x micro USB adapters. Universal Compatibility: Works effortlessly with all USB C and USB A devices, making it a must-have for every tech-savvy individual.High-Speed Data Transfer:...

In stock

Extruder spare parts

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

1913

kr9.60

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

In stock

Bed adhesives

DimaFix Spray

6272

kr95.20

In stock

Belts

Original Gates Belts (GT3 LL-2MGT) - Price per meter

42279

kr52.00

Original Gates belts are produced to perfection. They are incredibly durable, and while in use, the belt can effectively reduce the appearance of vibrations as well as dust on the tooth surface. GT3 Gates belts are approximately 20% stiffer and stretch less than 2GT belts, while being backward compatible with the 2GT tooth profile

Adhesive insulation - thickness 10mm_1435

Adhesive insulation - thickness 10mm_1435 2

-50%

In stock

Spare parts for print bed

Adhesive insulation - thickness 10mm

33364

kr19.60 kr39.20

Adhesive multi-size cotton insulation, 10 mm thick

In stock

Wiring

Ferrit noise filter

40374

kr9.60

Introducing the Ferritstøjfilter, a compact and efficient solution to electronic interference. This clever device, measuring just 30x15x17mm, is designed to reduce noise and improve the performance of your electronic equipment.Featuring a 210Ω impedance, the Ferritstøjfilter is easy to install - simply clip it onto your wires or cables. Its small size and...

In stock

Tools

PTFE Cutting Knife

638

kr13.60

In stock

Tools

Torque key for nozzle changes

6430

kr191.20

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer.Medfølger 7mm & 8mm socket, der passer...

In stock

Spare parts for print bed

Glass Hotbed Clip 1stk

33245

kr4.80