Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle (0.5mm) Tungsten Carbide Nozzle - Rentable Socks

Bozzle V2 (0.5mm) By Rentable Socks - Pre-order

Pre-order expected delivery mid December

Fully Tungsten Carbide nozzle (no insert) - The Last Nozzle You Will Ever Need

0.5mm Tungsten Carbide nozzle
High Flow, low clog geometry
High hardness for sustained printing with Filled / Abrasive Filaments
Reduced pushing force to get more from your extruder
Increased layer bonding strength when printing at same temperature as steel nozzles
Reduced filament sticking with some filaments
6mm flats to fit inside nozzle shields
V6 and Mk8 compatible

See review by Vez here https://www.youtube.com/watch?v=-7_OIoBxBtA

Diameter

0.5mm

Pre-order expected delivery mid December

kr552.00

Product Details

Thread: V6 / M6
Material: Tungsten Carbide

Reference 4995

16 other products in the same category:

E3D RapidChange Revo™ Brass Nozzle_3135

E3D RapidChange Revo™ Brass Nozzle_3135 2

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Bondtech CHT® MK8 Coated Brass Nozzle_1798

Bondtech CHT® MK8 Coated Brass Nozzle_1798 2

In stock

Nozzle

Bondtech CHT® MK8 Coated Brass Nozzle

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench

Phaetus M6 / V6 Tungsten Carbide Nozzle_2734

Out-of-Stock

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

E3D RapidChange Revo High Flow Nozzle for 3D Printing

E3D RapidChange Revo High Flow Nozzle for 3D Printing 2

In stock

Nozzle

E3D RapidChange Revo™ High Flow Nozzle

High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials. Maximum temperature: 300°C Filament diameter:...

Bondtech CHT® Coated Brass Nozzle_1801

Bondtech CHT® Coated Brass Nozzle_1801 2

In stock

Nozzle

Bondtech CHT® Coated Brass Nozzle

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Bondtech CHT Spider Brass Nozzle for 1.75 & 2.85mm Filaments

In stock

Nozzle

Bondtech CHT Spider Coated Brass Nozzle

Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6...

Phaetus Volcano Compatible Tungsten Carbide Nozzle_2742

Product available with different options

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

View

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision 2

In stock

Nozzle

Phaetus Silicon Carbide Nozzle: Ultimate 3D Printing Precision

Phaetus Silicon Carbide Nozzle: Uncompromising Performance for All Materials Elevate your 3D printing with our high-performance silicon carbide nozzle. Features include: 99.9% high purity Silicon Carbide tip for exceptional wear resistance Compatible with all materials, from PLA to PEEK and carbon fiber 550°C max printing temperature for...

Phaetus PH Volcano Brass Nozzle 1,75 mm_2802

Product available with different options

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

View

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade

Mellow RTV6 Bi-Metal Heatbreak | High-Flow Compatible Revo Upgrade 2

New

In stock

Hotend spare parts

Mellow RTV6 Bi-Metal Heatbreak for Revo Hotends

High-precision heatbreak featuring: Bi-metal design: copper & TC4 titanium Compatible with V6 and CHT nozzles Maximum temperature: 500°C Weight: 6.87g Ra 0.4 surface finish 1.75mm filament diameter Includes 2 installation socks Size: 42mm x 9.8mm (M4 thread)

E3D Volcano ObXidian Nozzle: High-Performance Printing

E3D Volcano ObXidian Nozzle: High-Performance Printing 2

-30%

In stock

Nozzle

E3D Volcano ObXidian Nozzle

kr229.04 kr327.20

ObXidian is E3D's latest abrasive Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles. Material:...

Phaetus PS M6 Copper Nozzle 1,75 mm_2777

Phaetus PS M6 Copper Nozzle 1,75 mm_2777 2

-40%

In stock

Nozzle

Phaetus PS M6 Copper Nozzle 1,75 mm

kr47.04 kr78.40

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow

Bondtech CHT BiMetal Vol Coated Nozzle for High Flow 2

In stock

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Phaetus PH Volcano Copper Nozzle 1,75 mm_2798

-40%

In stock

Nozzle

Phaetus PH Volcano Copper Nozzle 1,75 mm

kr71.52 kr119.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Phaetus PS M6 Brass Nozzle 1,75 mm_2771

In stock

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

Experience the difference with the Phaetus PS M6 Brass Nozzle 1.75 mm - a premium, high-performance nozzle that's designed to take your 3D printing to the next level. Just like a sharp pencil is essential for fine drawing, a top-quality nozzle is crucial for achieving excellent print results. This product is perfect for those who settle for nothing but...

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm_2782

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm_2782 2

-40%

In stock

Nozzle

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm

kr50.40 kr84.00

Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole Inner hole...

Product added to wishlist