Pulley 1.5GT 27T (Bore/ID 5mm)

This 27-tooth 1.5GT Pulley is intended for Gates LL-1.5GT belts and other belts with the same 1.5mm tooth profile. The fine pitch provides a compact pulley with low rotational mass and precise power transmission.

As with 3DO's other Gates-spec pulley variants, the part is produced using original Gates moulds/tooling and manufactured to Gates requirements and specifications.

Variants

• 7mm – for 6mm belt: 7mm tooth width and approximately 16mm overall height.
• 11mm – for 9/10mm belt: 11mm tooth width and approximately 20mm overall height.

Specifications

• Tooth profile: 1.5GT / LL-1.5GT
• Tooth count: 27T
• Bore/ID: 5mm
• Material: aluminium
• Mounting: hub with set screws
• A 27T 1.5GT pulley is the approximate size alternative to a 20T 2GT pulley

Compatibility

Always verify the tooth profile, belt width, shaft diameter and available installation height. 1.5GT and 2GT/GT2 use different tooth pitches and cannot be mixed within the same belt drive.

Package contents

• 1 × 1.5GT 27T Pulley in the selected width