Electronics

Showing 157-168 of 195 item(s)

BD Sensor Kit: Revolutionize Bed Leveling with High-Accuracy Probe

BD Sensor Kit: Revolutionize Bed Leveling with High-Accuracy Probe 2

In stock

Probes

BD Sensor Kit

BD Sensor is a super fast new inductive bed leveling probe with 0.01mm resolution. It works slightly different than normal bed probes because it can measure & compensate for differences in realtime however you can still run it as a normal bedmesh if preferred. more info here: https://github.com/markniu/Bed_Distance_sensor

24V 48W Ceramic Heater X1C with JST-XH Connector

In stock

Heater

Ceramic Heater X1C

Introducing the Ceramic Heater X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days. For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and...

BIGTREETECH Panda Touch V1.0 | 5'' Touchscreen for Bambu Lab Printers

BIGTREETECH Panda Touch V1.0 | 5'' Touchscreen for Bambu Lab Printers 2

In stock

Displays

BIGTREETECH Panda Touch V1.0 - 5'' Touchscreen Display

BIGTREETECH Panda Touch V1.0 - 5'' Touchscreen Display - Revolutionize your 3D printing experience with the Panda Touch, developed by BIGTREE Technology Co., LTD. This 5'' touchscreen boasts a beautiful UI and offers plug-and-play convenience, perfect as a replacement or alternative screen for Bambu Lab printers including the P1P, P1S, X1, and A1 series....

3DO Enclosure / Nozzle Camera V2 Sensor

3DO Enclosure / Nozzle Camera V2 Sensor 2

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 Sensor

Sensor and lens for 3DO Nozzle / Enclosure Camera V2. Choose between three options: Nozzle camera glued (lens glued to 3.45cm focus range from behind FPC) Nozzle camera not glued (lens not glued and can be adjusted to your desired focus range) Enclosure camera not glued, 120° FoV (lens not glued and can be adjusted to your desired focus range)...

3DO Enclosure / Nozzle Camera V2 DSP PCB

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 DSP PCB

The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

3DO Enclosure / Nozzle Camera V2 FPC Cable

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 FPC Cable

FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

Remote warehouse 2-3 days

Cameras

Generic USB Cable for Nozzle Camera (USB A to 5P) - 2 Meters

Generic USB A to 5P JST SH for 3DO Nozzle Camera DSP PCB.

LDO NiteHawk SB toolhead board

LDO NiteHawk SB toolhead board 2

In stock

Mainboards

LDO NiteHawk SB toolhead board

Nitehawk is a toolhead PCB with an RP2040 MCU, TMC2209, and accelerometer, all integrated into one board. The form factor is based on HartK’s two-piece stealth burner toolhead PCB but with some minor changes. Read more here

BTT EBB 42 CAN V1.2 Board - Maximize Your Tech Projects

BTT EBB 42 CAN V1.2 Board - Maximize Your Tech Projects 2

In stock

CAN BUS Boards

BTT EBB 42 CAN V1.2 with max31865

Introducing the BTT EBB 42 CAN V1.2 with max31865 - a compact and powerful device designed to revolutionize your tech projects. This product boasts a 40mmx40mm external dimension and is powered by an ARM Cortex-M0 STM32F072C8T6 48MHz microprocessor for swift operations. It supports an input voltage of DC12V-DC24V 9A and a logic voltage of DC 3.3V. With an...

High-Performance GDSTIME GDA2507 5V Axial Fan

High-Performance GDSTIME GDA2507 5V Axial Fan 2

In stock

Fans

GDSTIME 2507 5v Axial Fan - 28dBA 10.000RPM

Introducing the GDSTIME GDA2507 5v Axial Fan - a compact, high-performance cooling solution. With a Sleeve Bearing design and an impressive 10,000 RPM, this fan delivers an efficient airflow of 2.06 CFM and an air pressure of 0.19 In H2O. Powered by a 5VDC voltage, it consumes a mere 0.1A, making it an energy-efficient choice. Equipped with a JST XH...

Thermistor Ceramic Heater for Bambu Lab P1P/P1S

Thermistor Ceramic Heater for Bambu Lab P1P/P1S 2

In stock

Heater

Thermistor & Ceramic Heater for Bambu Lab P1P/P1S

This ceramic heater and thermistor module is designed for the Bambu Lab P1P and P1S 3D printers. It combines a 24V 48W heating element with a 100K Ohm NTC 3950 thermistor for accurate temperature control and efficient heating. Heating slice: 24V 48W Thermistor: 100K Ohm NTC 3950 Resistance Accuracy: ±1% Temperature Range: -40℃ to +300℃ Max Rated...

FLY SHT36 V3.0 Pro Kit for 3D Printer Extruder Heads

FLY SHT36 V3.0 Pro Kit for 3D Printer Extruder Heads 2

In stock

CAN BUS Boards

FLY SHT36 V3.0 Pro Kit

The FLY-SHT36 V3 is a tool board designed for 3D printer extruder heads, simplifying the wiring between the mainboard and print head with just four wires. It supports 36-step motors and integrates CAN & RS232 transceivers, a USB port, TMC2209 driver, LIS2DW accelerometer, and two controllable fans. Compatible with Klipper firmware, the Max version also...

1
…
13
14
15
…
17

Product added to wishlist