3DO Dyse Kamera
Efter at have set en masse seje videoer af DIY dyse kameraer...
Besluttede vi os for at lave et rigtigt "Dyse Kamera" til 3D-printere.
Demo video:
https://www.youtube.com/watch?v=BjG8rhLlGIU
Sættet indeholder
- 1x Dyse Kamera (4K eller FHD beskrivelse længere nede)
- 4x 2*10mm SHCS skruer (til PCB montering)
- 2x 5050 SK6812 WWCW 6000K LED
- 1x Høj Temperaturs USB-kabel (FEP + silikone)
Se mere på:
Two versions having different price points (IMX258 and OV5648)
IMX258 can do [email protected] and are therefore optimal for fast printing, whereas OV5648 can do [email protected]
| 4K (Sony IMX258)
| FHD (OV5648)
|
Sensor Size | 1/3.06 | 1/4 |
Mega-Pixel | 13MP | 5MP |
Frame Rate | ||
Lens type* | Fixed Focus | Fixed Focus |
FoV | 80Deg | 82.7Deg |
Operating temperature** | -20°C TO 60°C | -20°C TO 60°C |
Storage temperature | -40°C TO 80°C | -40°C TO 80°C |
*Focus distance from the back side of the camera to the object is set to 34.5mm
(it’s possible to change the focus distance by rotating the lens. Note the lens is glued in place, so new glue needs to be applied after adjusting)
**Though this is the camera rating we tested it in a 70C heat chamber for 24hrs without any issues.
FPC (Ribbon between sensor and PCB) is rated at 225C. In the 120C heat chamber, the lens housing started to deform (we may change the housing material for the next version)
Contributors that made this project possible, a big thanks to you all!
CAD Design & Testing
- Olof Ogland (Known from Bondtech)
- Kenneth Munkholt (VZ Community)
- Dennis Jespersen (From RatRig Community)
Software Development & Testing
- Meteyou (Mainsail founder)
- KwadFan (Crowsnest founder)
- Rogerlz(Crowsnest Tester)
Beta Testers
- Mitsuma (From RatRig Community)
- Joao Barros (From RatRig Community)