BIGTREETECH PI4B Adapter V1.0 for CM4 or CB1

Name: BIGTREETECH PI4B Adapter V1.0 for CM4 or CB1
Brand: BIQU
SKU: 25675
Price: 151.2 DKK
Availability: InStock

Sidste elementer på lager

151,20 kr.

BTT PI4B adapter til Raspberry Pi CM4 eller BTT CB1

40-pin GPIO connector

4 x USB 2.0 stik

2 x Micro HDMI stik

CSI/DSI porte virker pt. kun med CM4 modulet og ikke CB1

Detaljer om produktet

Mærke

Reference 25675

På lager 3 Varer

16 andre produkter i samme kategori:

Boards

Bigtreetech BTT Pi V1.2

BIQU

25675

236,00 kr.

BIGTREETECH Pi v1.2 has the same size and the same mounting hole location as Raspberry Pi, with 2.4GHz WiFi built in. Feature Highlights CPU: ALLWINNER H616, Quad-core Cortex-A53 @1.5GHz GPU: Mali G31 MP2, Support OpenGL3.2 RAM: 1GB DDR3L SDRAM Display: HDMI2.0A Port, 4K Supported 4 x USB 2.0 Ports Fast Ethernet + 100Mbps WiFi Audio: 3.5mm Jack 40-pin...

Boards

FLY-UTOC-1

110,00 kr.

Boards

BTT U2C V2.1 - 3 CAN Output

BIQU

25665

212,00 kr.

Support CAN bus connection, long data transmission, strong anti-noise ability, strong real-time performance and high reliability The surface of the PCB adopts the immersion gold process TYPE-C port ESD protection to prevent static electricity from damaging hardware Support firmware update for the master through SWD or hardware DFU Rich CAN interface...

Ikke på lager

Boards

BIGTREETECH SKR 3 EZ

BIQU

25607

471,20 kr.

Voron StealthBurner Fully Assembled LED Kit

Voron StealthBurner Fully Assembled LED Kit 2

Ikke på lager

Tilbehør

Voron StealthBurner Fully Assembled LED Kit

20620

71,20 kr.

Fully assembled led kit for StealthBurner. Chain of 3x NeoPixels (RGBW) 1x JST connected by genuine PTFE wire.

Boards

MINI12864 V1.0 LCD Screen VORON

BIQU

25358

103,20 kr.

2,4" højkontrast grafisk LCD MINI12864 V1.0 LCD skærm som fra Voron Bill of Materials Bruger EXP1 og EXP2, Understøtter flere farver

Boards

BIGTREETECH Octopus Pro V1.0（F446)

BIQU

25357

396,00 kr.

BigTreeTech Octopus Pro med F446 chip og 8 akser, fuld understøttelse af RepRap firmware Størrelse: 160x100mm Afstand for monteringshuller: 150x90mm Strøminput: DC15-28V Understøtter ESP8266 Wifimodul(MAX500k/s) Understøtter UART, SPI, STEP/DIR File Format: G-code Thermistor: NTC 100K*5+indbygget MAX31865 chip (weld-free switched 2/4-wire PT100/PT1000)...

Boards

BIGTREETECH KNOMI v1.0

236,00 kr.

Why KNOMI? Klipper-Optimized Design:For maximum performance and compatibility. Personalize Your Printhead:Know the real-time status of your printer via KNOMI UI, offering an enjoyable and fun 3D printing experience. VORON Ready:Easily upgrade your StealthBurner with KNOMI using our customized printed part files. Open Source:For maximum flexibility and...

-30%

Boards

BTT "Smart Filament Sensor

25156

105,84 kr. 151,20 kr.

Boards

BIGTREETECH CB1 Heatsink

BIQU

25676

47,20 kr.

BTT køleplade til BTT CB1

Boards

VORON V0 DISPLAY

BIQU

25400

263,20 kr.

VORON V0 DISPLAY Skærmstørrelse: 1,3 tommer Farve: Sort Kompatibel med 3D-printer VORON V0, skærmen er også kompatibel med Raspberry Pi 3B+

Boards

BTT SKR Pico V1.0 Control Board

BIQU

25603

279,20 kr.

Using Raspberry Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware. BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful and...

EBB SB2209 CAN V1.0 for Voron StealthBurner

EBB SB2209 CAN V1.0 for Voron StealthBurner 2

Ikke på lager

Boards

EBB SB2209 CAN V1.0 for Voron StealthBurner

199,20 kr.

EBB SB2209 includes: EBB 2209 CAN x1 EBB SB0000 CAN x 1 3m CAN bus Cable x 1 Heat Sink x 1 DIY Crimp Terminal Set x 1 Jumper Cap Set x 1 Zip Ties x 2 Fixing Screw Set x 1

Boards

Bigtreetech Manta M8P

BIQU

25690

519,20 kr.

Manta M8P by BIGTREETECH is a versatile 32-bit mainboard that has many features and offers a variety of upgrade options thanks to many interface options. The mainboard is compatible with Marlin open-source software and with Klipper firmware when combined with the CB1. Main Features: 32-bit ARM® Cortex-M0+ STM32G0B0RE, 64MHz - faster and more stable BTB...

Boards

LDO Picobilical for V0

LDO

303,20 kr.

The Picobilical by LDO is a mod designed specifically for the Voron 0 printers. The Picobilical is based on V0-Umbilical by timmit99 and retains its original advantages while introducing new features: Rear mounted toolhead PCB simplifies toolhead wiring. On-board RP2040 microcontroller frees up ports in the main controller while greatly simplifying...

Ikke på lager

Boards

Fly SHT36 V2.0 Board

183,20 kr.

SHT board uses can communication to connect the host computer to the UTOC board, and then communicate with SHT through UTOC. After adding 31865 chip to SHT board, it supports pt100 temperature measurement, and customers can choose according to their needs. The resistance value of the temperature measurement interface is 4.7K or 1.1K switchable, so you...

Kunder, der købte dette produkt, købte også:

Boards

BIGTREETECH CB1

BIQU

25677

199,20 kr.

BTT CB1 er et SBC (Single board computer) modul udviklet som et alternativ til Raspberry Pi CM4 og kan benyttes direkte monteret på BTT M4P/M8P.Se eventuelt BTT Pi4B adapter som benyttes til at give BTT CB1 eller Raspberry Pi CM4 en Raspberry Pi 4B størrelse og funktionerPrimære funktioner: Quad-core 64-bit ARM Cortex-A53 på 1.5 GHz og med 1GB RAM...

Boards

ADXL345

25399

28,80 kr.

ADXL345 er et lille accelerometer med lavt strømforbrug og med 13-bit opløsning, der registrerer bevægelse i tre retninger. Sensoren har en maksimal rækkevidde på ± 16 G og registrerer bevægelser ned til 0,04 G. En række ekstra funktioner er tilgængelige via de to interrupt-udgange, f.eks. sensoren kan registrere aktivitet/inaktivitet, registrere slag...

På lager i nogle varianter

Komplet extruder

Vz-Hextrudort From VzBoT By Mellow

22738

476,00 kr.

Leveres uden motor The extruder shell is made of 6061 aluminum alloy by cnc machining with high precision, which has not only metal strength but also ultra-light weight.Metal has strength and precision that plastic shells cannot. Metal with thermal conductivity will conduct the heat of the motor, but this is also the process of heat dissipation of the...

Tilbehør

LDO Heat Insert værktøj M3

LDO

6338

39,20 kr.

Værktøj til brug for isætning af heat-set inserts i M3 størrelse. Påmonteres en kompatibel loddekolbe

Boards

BIGTREETECH CB1 Heatsink

BIQU

25676

47,20 kr.

BTT køleplade til BTT CB1

Filament

3DO PETG 2.0 Mat 1KG - Makita Blå

3DO

50497

156,00 kr.

Næste geration af PETG- 3DO PETG 2.0Overfladen er blevet optimeret for at sikre exceptionel printkvalitet med et mat finish. 3DO PETG er designet til brug i en lang række applikationer hvor der kræves en god blanding af mekaniske og optiske materialeegenskaber.Råmaterialet er blevet godkendt i overensstemmelse med FDA-, REACH- og RoHS-regulativerVed en...

Ikke på lager

Boards

LDO input shaper kit

LDO

25734

72,00 kr.

LDO input shaper kit to simplify the ADXL345 wiring and installation. The ADXL345 is 3-axis accelerometer with high resolution measurement at up to +/-16 g. Digital output data is accessible through either a SPI (3 or 4 wire) or I2C digital interface. The ADXL345 is well suited to measure the static acceleration of gravity in tilt-sensing applications,...

Bowden tube - PTFE

Capricorn Bowden PTFE

Capricorn

1617

103,20 kr.

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

Kunder, der købte dette produkt, købte også:

Bowden tube - PTFE

Capricorn Bowden PTFE

Capricorn

1617

103,20 kr.

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

Boards

ADXL345

25399

28,80 kr.

Boards

BIGTREETECH CB1

BIQU

25677

199,20 kr.

Filament

3DO PETG 2.0 Mat 1KG - Makita Blå

3DO

50497

156,00 kr.

Filament

3DO PETG 2.0 Mat 1KG - Sort

3DO

50497

156,00 kr.

Tilbehør

LDO Heat Insert værktøj M3

LDO

6338

39,20 kr.

Værktøj til brug for isætning af heat-set inserts i M3 størrelse. Påmonteres en kompatibel loddekolbe

På lager i nogle varianter

Komplet extruder

Vz-Hextrudort From VzBoT By Mellow

22738

476,00 kr.

Filament

3DO PETG 2.0 Mat 1KG - Grå

3DO

50497

156,00 kr.

Boards

BIGTREETECH CB1 Heatsink

BIQU

25676

47,20 kr.

BTT køleplade til BTT CB1

Ikke på lager

Boards

LDO input shaper kit

LDO

25734

72,00 kr.